How to tie a sliding knot closure
Vložit
- čas přidán 22. 08. 2024
- you will need:
1.5 or 2 mm leather cording- i am using @beadalon Leather, Greek, 1.5 mm / .059 in, Brown, 5 m / 16.4 ft cording- available in my shop!
Directions:
Cut 18 inches of 1.5 mm cord ( so you have enough to work with for tying knots)
*Take the left strand of the cord and have it lay in front of the right strand of the cord.
*Wrap the cord forming a loop around the right strand of the cord once and once again. Then take it back over to the left strand. Then feed it through the two loops you’ve just made it going from left to right.
*Pull tight. The knot will slide on the cord.
*Now you want to do this again on the other side.
*Take the end of the right hand strand, and make sure it’s in front of the left strand. Wrap it once to form a loop and wrap it again. While moving towards the left. And bring it back to the right hand side and feed it through the two loops That you’ve just made it going from right to left and tighten the cord.
*And now you’ve completed the sliding knots adjustable bracelet.
*Remove any excess cord at the ends, but make sure you leave enough to grab onto.
You can reach me at:
www.andriabieberdesigns.com
If you want to support my work & not make a purchase, you can buy me a coffee. Thank you! Paypal.me/andriabieberdesigns or Venmo @andria-bieber
Let's visit some more on:
Facebook / andriabieberdesigns
Instagram at / andriabieberdesigns
Pinterest at / andriabieberdesigns
Join this channel to get access to perks:
/ @andriabieberdesigns
Thank you. Very useful for a cord necklace with a pendant. Came undone and didn't know how to re-tie the knot.
Glad it was helpful!
Very useful. Thank you, Andria. Have a happy day!
Thank you! You too!
I so appreciate this tutorial, thank you! I struggle with making a functioning sliding knot.
You are so welcome! Thank you 🙏
Very cool, thank you for sharing 💗👏🏻😊you make it look easy but this is going to take practice and patience for me 😅
Thank you! It takes me a big every time 😄
I’m so excited about this .. Thank you so much !!
You are so welcome! Thank you 🙏
Thank you
You're welcome
G8 tutorial, thanx🎉 will get practicing
Have fun and thank you 🙏
Thanks!
Welcome!🙏
Very nice , different to other videos I’ve seen where a tube is used , barrel knot, does it not matter which way you wind the loops ?
you want to have the knots going the direction you need to pull. The right pull needs to go off to the right and the stem on the left needs to go to the left because of how you open and close the sliding knot..