Vibration Issue 2010 (2006-2010) Hyundai Sonata Transmission Mount Replacement
Vložit
- čas přidán 6. 09. 2024
- Vibration Issue 2010 (2006-2010) Hyundai Sonata Transmission Mount Replacement
DISCLAIMER: The information provided in this video does not and is not intended to, constitute advice, instead, all information, content, and materials available in this video are for general informational purposes only. This video is for educational and entertainment purposes only. Information on this video may not constitute the most up-to-date legal or other professional information. This video contains links to other third-party websites. Such links are only for the convenience of the reader; user or browser; Cars and Espresso does not recommend or endorse the content of the third-party sites.
As an Amazon Associate, I earn from qualifying purchases.
Hello, How did you manage to remove the roll stopper (engine mount) that is located in the rear of the engine? Its the one held by 4 bolts to the frame the tall one.
What brand mounts did you use?
Did the tranny mount cause the steering wheel to vibrate
When u say no shakeing do u mean in the steering wheel
the whole car...
@@CarsandEspresso so their was no vibration in the steering wheel at all it was just in the seats
@@shyne5637 including the steering wheel... here is everything I did... czcams.com/video/FnfiaZff16o/video.html
It was finally the driver's CV Axel...
Ya I just did both axles I did both control arms both ball joints both outer tie rods both struts both sway bar links both sway bar bushings front rotors and pads both front tires and balanced did a alignment I did 2 of the motor mounts and I’m still getting a vibration I did everything their is to do and I still have a vibration I never did the tranny mount yet that’s why I was asking if it shakes the steering wheel cause my steering wheel shakes between 50 and 80 mph it’s driveing me crazy I have done everything I did spark plugs also new alternator new serpentine belt new battery new purge valve selonoid new vent valve selonoid new vapor canister new gas cap air and cabin filter all brand new I did a oil change a tranny flush a brake fluid flush rear shocks springs and mounts rear lower knuckle bushings rear sway bar links and bushings also did rear tires and balance rear rotors and pads I did the front left caliper I did all new Exaust manifold gaskets and Exaust gaskets new oxygen sensor the rear wheel bearings and hubs I did every thing I’m running out of things to replace I replaced everything and I still have this dam vibration it’s driven me crazy I Ben trying to solve this problem for 2 years now every garage I bring it to no one can find anything wrong