2000hp FFRE Predator Coyote Block With Voodoo Cylinder Heads Assembly
Vložit
- čas přidán 1. 06. 2023
- In todays video, Brett LaSala assembles this new Coyote engine. This engine consist of a FFRE engine short block with a pair of voodoo cylinder heads that they did a ferrea valve job on. This is a high effort coyote build. It's going into a twin turbo all-wheel drive F-150. This uses a predator block that's sleeved and then paired with this head. This is one of the best combinations for a coyote in my opinion that you can use with Factory castings. There will be two 76 mm twin turbos going on this setup. A lot of horsepower and really good set of parts. Watch the full video to learn more about this setup.
Blog: www.realstreetperformance.com...
Thank you for watching! Don’t forget to Click SUBSCRIBE & turn on post notifications, click the bell 🔔 icon
👉 www.realstreetperformance.com 👈
sales@realstreetperformance.com
Phone: 407-695-7223
Text / Whatsapp: 407-724-2484
•Follow us•
Instagram: / realstreetperformance
Parts Instagram: / realstreetperformancep...
Powersports Instagram: / realstreetpowersports
Facebook: / real.street
Twitter: / realstreetrsp
TikTok: www.tiktok.com/@realstreetper... - Auta a dopravní prostředky
Wish this video was an hour long
Me too
It would nice to see a video on the F150 build
Brett you’re doing great relax brother
Great vid !
Have you all considered doing a Ford 7.3 build?
Any reason the aluminum "Predator" block is used rather than the "Werewolf" cast iron coyote block other than weight? The Werewolf block was designed from the ground up as a drag application block with class-50 cast iron, 12mm head stud holes, and able to be stroked to 99mm.
Because there is no need for the cast iron block unless youre doing a budget build and dont want to use sleeves. FFRE uses thick steel sleeves that that are much stronger than the cast iron block. They have yet to find a weakness with the aluminum blocks (once properly sleeved) that there is no need for the added weight.
@@rileyneufeld7001ffre means its not a stock ford block since they changed sleeves and stuff. I was hoping it was stock block
@@realshidd3062 Stock block means something entirely different than stock engine. The block is a factory Cast OEM part you can pickup at a dealership. Not a custom billet block or an aftermarket block from a company.
Are those 12mm head studs?
Why are there additional lobes on the camshafts ?
I usually watch and fall to sleep Jay !
yip love that shit ,love it
What is the maximum cubic inch a coyote engine?
What’s your favorite part of this coyote build?
It’s a Coyote
The detailed explanation 👌
The amount of factory parts still being used
@@69BOSS429s it though? "predator" block ,GT350 heads, different crank at what point is this not considered a coyote to you? because for me it was awhile ago😂... I got the same heads that came on my coyote just ported different cams my work is trying out and some good internals with a real big turbo if I had the money I would do the exact same thing brett is doing though..
@@Jonathanw704factory parts but not all from the stock coyote lol
Its mathematically satisfying to the brain To watch Your engine builds My brain has been satisfied to hear Jay speak about these engines its timme for naaap ( Im suggesting computer chips in the brain will one day allow engine building )( V9oodoo physics will allow .. These parts to move and assemble their selves)
oil rings tight on that baby? see some vertical hazing of the cylinder bores.
Stainless o-rings with a MLS head gasket is a strange combo, neither of those can deform.
i still get shit on everytime i say it. But these new 5.0 coyote, voodoo.. Are beeeeast.
You're only crapped on by ignorant fanbois that know nothing about the amazing accomplishments of the twin cam fords.
Not a bad way to spend 20k
😂
4x4...
The video was over to quick needs to be re-released and take at least 30 minutes minimum
These guys keep wanting to state it’s a “coyote build”, when it really isn’t. Predator block, GT350 heads, different crank, etc, etc. Not saying this isn’t impressive, it’s just not done on the cheap with a Coyote motor.
Lol
Please show us another platform that's done what theirs has on OEM parts....
You can't because this is the pinnacle of modded oem performance.
Maybe you didn't see his dominant performance last sick week?
Quickest/Fastest proven radial car in the world that's been street driven and on oem engine parts.
These are all coyote parts. Coyote is the engine family. If I build a 2 barrel 352 and then build a 427 side oiler and put them next to each other guess what, they are both still FE’s. If the parts don’t interchange and they aren’t the same engine family then you would have a point, but they don’t, and you don’t.
@@mitchanderson5813You won’t find any parts on this build from a 5.0 motor and that’s the point. The fact they may be “related” is irrelevant.
Finally someone that isn’t delusional 😂 I’m more impressed that a naturally aspirated stock bottom end camaro ran 8.5 😂😂😂😂😂