How to Air bleed Mercruiser outdrive Trim rams and hoses
Vložit
- čas přidán 27. 08. 2024
- If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: • Fix Boats / Jet Skis /...
************
1. Handheld inspection mirror: amzn.to/4738hIY
2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
5. Quicksilver grease gun: amzn.to/3uOFgDG
6. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
7. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
8. Trim Ram plastic caps: amzn.to/3NlBV5b
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
• Install Mercruiser alp...
2. How to replace Trim Rams and Hoses
• Replace Mercruiser out...
3. Replace Anode kit
• Replace Mercruiser out...
4. Replace outdrive bellows/shift cable (PART 1)
• Replace Mercruiser alp...
5. Outdrive upper unit rebuild (PART 1)
• Replace Mercruiser upp...
6. Outdrive Lower unit rebuild (PART 1)
• Mercruiser outdrive lo...
8. How to grease your outdrive grease fittings
• How to properly add gr...
👍😎
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: czcams.com/play/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS.html&si=0QF9J0YNrNOKii3a
************
1. Handheld inspection mirror: amzn.to/4738hIY
2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
5. Quicksilver grease gun: amzn.to/3uOFgDG
6. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
7. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
8. Trim Ram plastic caps: amzn.to/3NlBV5b
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
czcams.com/video/HgMSGiSiBA4/video.html
2. How to replace Trim Rams and Hoses
czcams.com/video/nkcFYl5bL7c/video.html
3. Replace Anode kit
czcams.com/video/qy_qclP3zUQ/video.html
4. Replace outdrive bellows/shift cable (PART 1)
czcams.com/video/NcObTOYXtQM/video.html
5. Outdrive upper unit rebuild (PART 1)
czcams.com/video/i7nRJPbRYPI/video.html
6. Outdrive Lower unit rebuild (PART 1)
czcams.com/video/ehTA4BRH4t8/video.html
8. How to grease your outdrive grease fittings
czcams.com/video/7q1sBu0TsPw/video.html
👍😎
You, sir, are the Mr. Rogers of boat repair.
@@hermanprez
Good morning ☕️
Thank you for writing us, we are honored to be able to provide helpful DIY videos to the DIY community.
😁👍🧰
Step by step video, love it, thanks Michael and Merry Christmas to you and your family 👍😁
Thank you Dave, this was an important video for us to create and have available to the DIY community.
Merry Christmas to you and yours.
nice job!. when cycling up/down... wait a min between cycles. Air gets whipped into fluid/reservoir. Waiting a few gives air a chance to separate from oil.
Good morning ☕️ thank you. We are honored you took the time to share your thoughts and additional advice.
Any and all helpful info is greatly appreciated here on our channel.
😁👍🧰
Great instructions, thank you!
I have a 2001 5.0 Mercruiser. My manual says I can use 10W30 or 10W40 engine oil for the trim pump. Far cheaper than the Mercruiser trim fluid.
@@billybobsowbreath1774
Good morning ☕️ we have seen that in a few manuals as well over the years. That will be personal preference. 😁👍🧰
You should do voiceovers on every “how to” video
Great video! I like using quick silver products for marine equipment too.
Good morning ☕️. Thank you, same here. A very good, reliable, and respected brand. 😎👍🧰
@@DIYwithMichaelBorders Merry Christmas!
@@AM-bk9ei
Thanks man, you too! 👍
Good morning , what if I only opened the system up inside the boat to replace the o rings on the bottom of the pump ( older style ) I had to remove the pump from the boat , do I drill need to bleed the system like this ?
Rams and hoses should still be full of oil I would think ......
Thanks for your time
If I am only replacing the lines and not the trim ram, is the bleeding less comprehensive??
I was hoping that I literally could just crack the lines at the connection to the rams and get the air out of the lines that way..
Plz advise..
same question
Can you drain all the fluid out by just taking those lines off and trimming up? Think my fluid needs replaced to not just topped off
Thanks for watching ☕️
You can however please please please don’t run it dry. You will need to replace pump motor and possibly other parts…not good.
Hi Mike.. Why does my tilt up/down works perfectly but my trim will only work on the down and not up? Cant be solenoids if tilt up/down is working fine.. Also I hv cleaned the trim limiter connections so I am at a loss as tk what else tk do.. Thoughts?
@@TedDegenhart-f4c
Thanks for watching, any update? Do you see any signs of damage to the wiring feeding into and out of the trim solenoids?
It’s most common for the issue to be electrically as opposed to hydraulically. Any signs of damage to the trim sender or limit switches installed on outdrive?
I can't get my trim down to do this?
@@EDJ_3D
Good morning ☕️
Any update? Is everything reconnected and secured properly electrically?
I have metal reservoir so how do I refill fluid in it?
@@hsertaw9918
Thanks for watching, any update? Is there an access cap to remove?
How do you locate/purchase mercruiser 4.3 trim ram plugs? I'm ready to bleed my hydraulic trim pump lines.
Thanks for watching, we can definitely help. We will need your Outdrive serial number located on drive.
Looking forward to hearing back from you. 👍
Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you for reaching out to us.
😁👍
👍👍👍👍
Good morning, thank you. We hope this video is helpful for many. 👍☕️
@@DIYwithMichaelBorders 👌👌👌👌👌🤝