Vložit
- čas přidán 25. 08. 2019
- Buy Here: suild.com/shop/4
Installation Tutorial Video: czcams.com/video/yUofIw6U_CI/video.html
Full Walkthrough in Stock Rapidstrike Video: COMING SOON
In-Depth Overview Video Video: COMING SOON
Files: github.com/Suild/select-fire-rapidstrike-kit
Grants reliable select-fire control to your Rapidstrike with an optional rate of fire control using a knob. Like every other kit, this one is super simple to install and requires no soldering directly onto the board to get everything up and running in under a minute, even easier than a regular RS mod!
Built-in pusher return and solenoid support makes this kit easily adaptable to any custom 3D-printed blaster. A powerful voltage regulator buck converter, on-board Arduino Nano, and breakout of power rails make this ideal for tinkerers and Makers who want to bring this kit one step farther. And everything is open-source.
MOSFET Board 2 Buy Link: suild.com/shop/0
MOSFET Board 2 Overview Video: czcams.com/video/BVDsjGqfCsY/video.html
PWM Module Buy Link: suild.com/shop/3
PWM Module Overview Video: czcams.com/video/hD4B2-qqhxw/video.html
Website: suild.com/
Facebook: suildtech/
Instagram: suildtech - Věda a technologie
I am so excited to get this installed!
I am impressed and just bought one.
Will they be back in stock soon?
Great work as always!
have you tried this out yet? I'm waiting on mine, and trying to find out if you get full function with all 4 modes of fire using a switch and the pusher, or if you need a solenoid pusher for it.
Wow o_o I can't wait until this comes back to stock. Thanks for making this!!
Actually, can I pre-order this?? :D
Sorry, you'll need to wait until they come back in stock
Oh man... strange times. I've come back to your site so many times and keep seeing your schedule push to the right. Hope you're well. Cheers!
yohanzo looks like he is not making these anymore.
@@vastneon yeah. I just discovered it and was so hyped. Oh well
can't wait!!!! :D
so sad that this doesn't ship intertnationally
Great products! Any ideas how this might integrate with an Infinus? It uses a RS pusher, but it has the complication of a 6v control board like the Regulator.. The articles I've seen online have two wires coming off the battery plug, one circuit for the rev trigger / flywheels, the other going to a voltage regulator then to the circuit board for everything else. Seems like this setup would let you do the rev / flywheels / pusher / trigger on one circuit, then the voltage regulator / circuit board on the other for the dart loading mechanism. Only issue would be with features like where if you load a dart while firing, the board stops the pusher until the dart loads, then let's it go again. Any idea how many volts go through the trigger switch from this board? Would be interesting to connect the pusher wires from the circuit board to the trigger connection on your board. It would let the circuit board still control power to the pusher, but still allow upgraded pusher motors running on the lipo.
I'll have something cooler in the works for the Infinus! It will take a lot of work to get this kit working with the Infinus.
Can you make a board for brushless motors, that just plugs into your select fire boards so you can have another little ecosystem? For pushers and flywheels?
Yep, I have a super cheap and simple brushless kit in the works! It will of course be open source and compatible with the ecosystem
Sweet! will it be compatible with all/lots of brushless motors, or will it be compatible with one kind?
The brushless kit should have the option to included a custom designed and printed cage, wheels, and motors. Additionally, I hope to make it compatible with other motors.
Super clean work. I was thinking about hacking a system like this together, but with your product as clean and easy as it is I can’t justify not using it.
Is there a configuration where the board can control the flywheels too? Something like what tungsten did with his rapid strike? Single trigger pull revs motors and and pushes dart a very short delay after?
Thanks! I don't sell different configurations of this product, but there's an onboard Arduino Nano that you can re-program to fit your needs. I'll do a tutorial on how to re-program the onboard Arduino in the future!
Do you think this would work with a mega motostryke with the ftw solenoid?
Hi, how can I get my hands on one of these kits? no stock on your website.
is there any way the selector switch could be moved to the left side of the shell above where your thumb would go, thanks in advance, i love your work
Absolutely! You can mount the switch anywhere it fits.
Mine is set to shoot 5 shots rather than 3 during burst mode. How can I edit this?
Very nice! Any clue when this will be back in stock?
I expect to put everything back on backorder later this week!
@@suild4680 Nice. I'm probably not going to get started on my Rapid strike build for awhile, I just wanted to make sure this was an option.
Wow. This is a brilliant addition to the line-up. Any chance of doing them for the Demolisher? EDIT: Either for a RS pusher (which fits really nicely in the back there...) or a solenoid (or both!) :0)
Thanks! I've gotten a few requests for the demolisher, but there aren't any reliable, aftermarket parts available. If someone releases one, I'd be happy to make a board!
@@suild4680 You mean no reliable aftermarket full-auto kits? Yeah, I feel ya. The RS box fits well but does need a lot of shell cutting. 3D-printed solenoid cradles are coming out for other blasters - it's only a matter of time before someone does one up for the Demo. Keep up the good work :)
Can you please make more of these boards or provide the files to have them created at our cost??
Pretty sure he has everything open-source/linked on his site...
solenoid kit for the raven please!
also does anyone know of a 3d printed solenoid mount for the rayven?
I plan on making a Select-Fire Rayven kit! There's an awesome full-auto Rayven kit by AtchAttachments that looks great. The Select-Fire Rayven kit will be compatible with both solenoids and third party full-auto kits.
I know this is gonna be pretty difficult, but stampede??
Also with the mosfet board 2, can you wire up a solenoid and a flywheel set at the same time?
I don't think the stampede is popular enough to make a custom select-fire kit for.
No, with the MOSFET Board 2 you will need to use 1 MOSFET board per load, unless you want the solenoid and flywheels to turn on and off at the exact same time. If that is your desired behavior, I would instead recommend the MOSFET board +, which has the included XT60 pigtails to drive up to 3 loads simultaneously.
Suild so every time I pull the trigger the flywheels would rev and the solenoid would do its thing?
Yep, but when you pull the trigger, the solenoid turns on and the flywheels begin to spin up. This means that your dart will exit the flywheels at a sub-optimal velocity. The solenoid will also be in semi auto mode as well (if you're using just a MOSFET board without a PWM module)
Suild but with the pwm module and the mosfet+ it will work? Because I don’t want to use 2 different liPos in my build
Also, thx for awnsering my questions
Yep, you can use a PWM module and a MOSFET board +. Remember that the PWM Module needs a power driver to operate (check out the FAQ or the video for the PWM module). I have an extended overview for the PWM module in the works where I'll go over how to power 2 separate MOSFET boards (with PWM Modules) from the same battery. I also have a wiring diagram available that I will put up on the site. Feel free to reach out if you have any questions in the meantime.
What if you don’t have a cycle control switch
In solenoid operation, this kit doesn't need a cycle control switch. If you're using the Rapidstrike gearbox, you'll need the cycle control switch.