How to fine tune clean rebuild, adjusts your Carburetors CX 500 Honda PART 1
Vložit
- čas přidán 9. 09. 2024
- Honda CX 500 Carburetors cleaning, adjustments, tips & tricks
How to fine tune clean rebuild, adjusts your Carburetors CX 500 Honda
⏬⏬⏬
🤝 JOIN PATREON: bit.ly/39SZWQv
🏍️ BUY A TANK OF GAS: ko-fi.com/stev...
🎁 BUY US A COFFEE: : ko-fi.com/stev...
⏬⏬⏬
With the support “Easy Rider Adventures USA”
👕MERCH
⚬ SHIRTS HERE: bit.ly/3xRvmPl
⚬ GPX MAP FILES HERE: bit.ly/3Ouc6hA
⚬ MOTORCYCLE TOURS: easyridertours...
⏬⏬⏬
📧CONNECT WITH US
⚬ Easy Rider Adventures: easy-rider.us
⚬ Socialize: bit.ly/3OCoLyT
⚬ INVEST OPPORTUNITY: bit.ly/3yg9WN5
⚬ Easy Rider Blog: bit.ly/3NkXmQW
A tour With Us Is an once-in-a-lifetime experience.
#cx500
I just walked in the house after rebuilding my CX500 carbs and needed to know where the mixture screws needed to be for a good starting point. Immediately found this video. THANKS!
welcome
That is a great video clip but the camera attached to your head move around to much, suggestion maybe mount camera stationary and zoom in for more detail close up.
Thank you, enjoy !!!
Great video just what I was looking for.Thanks
Glad it helped
Well done that’s a lost art
Hi Steve, I know it's an old vídeo bit just for refference to other people, when you open the cut off valve one very tiny o-ring was missing and you don't even noticed and reinstall the valve back without it
thanks since then i have done it a couple more times, works fine
Just make sure the float heights are the same , and the throttle plates are in synch, no leaks from the diaphragms
This carbs do not have diaphragms 🤔
Thank you, enjoy !!!
Check needle and seats also
Thank you, enjoy !!!
Fantastic job!! Are you located in Greece??
thank you, now yes
hey man i have big fuel leak i rebuilt the carbs and i did that properly but spits out alot of fuel
Take them to a mechanic 🧰
@@SteveHarleyTours I actually found out what it was thanks you tho
Can you reuse the old gaskets?
if are good why not, but if you can get new ones is better