E-flite - Viper V3 - 70mm - Unbox, Build, & Radio Setup
Vložit
- čas přidán 20. 09. 2023
- bprc.me/Viper
bprc.me/6S_3200 | bprc.me/6S_4000
bprc.me/3S_3200 | bprc.me/Series_Adapter
bprc.me/NX10
SUPPORT US | This box contains affiliate links.
www.BrianPhillipsRC.com
bprc.me/Patreon
bprc.me/PayPal - brianphillipsrc@gmail.com
bprc.me/CZcamsMembership
bprc.me/HorizonHobby
bprc.me/HorizonHobbyEU
bprc.me/TowerHobbies
bprc.me/ArrowsRC
bprc.me/BitgoHobby
bprc.me/FMS
bprc.me/FMSCanada
bprc.me/AMainHobbies
bprc.me/Banggood
bprc.me/Amazon
bprc.me/BuddyRC
bprc.me/Redcat
bprc.me/RTLFasteners
bprc.me/RCHackers
bprc.me/RCGoing
bprc.me/FairRC
bprc.me/TopRC
bprc.me/Creality
bprc.me/Titan
bprc.me/EBike
bprc.me/Furniture
bprc.me/Clothing
bprc.me/Solar
TX & RX
bprc.me/Tx
bprc.me/Rx
bprc.me/AR631
bprc.me/AR637T
bprc.me/AR8360T
bprc.me/LemonRX | amzn.to/34Zehs9
bprc.me/A3LRX | amzn.to/3yX2Mww
bprc.me/SkyID
SMART
bprc.me/SmartCharger
bprc.me/SmartBattery
GLUE | CA | KICKER | FOAM2FOAM | SUPPLIES
www.brianphillipsrc.com/supplies
bprc.me/FMS_Glue
bprc.me/VoltageAlarm
bprc.me/Servo
bprc.me/Forceps
bprc.me/LED_Kit
bprc.me/Iron
bprc.me/Mics
HORIZON
bprc.me/RealFlight
bprc.me/PlaneStand
bprc.me/150FX
bprc.me/150S
bprc.me/230S
bprc.me/330S
bprc.me/Fusion360
bprc.me/InFusion180
bprc.me/A10
bprc.me/AeroScout
bprc.me/AirTractor
bprc.me/Apprentice
bprc.me/Beechcraft
bprc.me/CarbonCubS2
bprc.me/CZ_Cessna150
bprc.me/CZ_Cub
bprc.me/Cherokee
bprc.me/CirrusSR22T
bprc.me/CitationLongitude
bprc.me/Commander
bprc.me/Conscendo
bprc.me/Draco
bprc.me/Duet
bprc.me/EC1500
bprc.me/Eratix
bprc.me/Extra300
bprc.me/F14
bprc.me/F15
bprc.me/F16
bprc.me/F18
bprc.me/F4U_Corsair
bprc.me/Fw190
bprc.me/Habu
bprc.me/Maule
bprc.me/Opterra
bprc.me/P39
bprc.me/P47
bprc.me/P51
bprc.me/PT19
bprc.me/Pitts
bprc.me/Radian
bprc.me/RV7
bprc.me/SportCub
bprc.me/SR71
bprc.me/SU30
bprc.me/T28
bprc.me/Timber
bprc.me/TwinOtter
bprc.me/Ultimate3D
bprc.me/UltraStick
bprc.me/Ultrix
bprc.me/V900
bprc.me/V1200
bprc.me/Valiant
bprc.me/Vapor
bprc.me/Viper
FMS
bprc.me/FMS_A10
bprc.me/FMS_ASW17 | bprc.me/HH_FMS_ASW17
bprc.me/FMS_Avanti
bprc.me/FMS_BAE_Hawk
bprc.me/FMS_Beaver | bprc.me/HH_FMS_Beaver
bprc.me/FMS_EasyTrainer
bprc.me/FMS_F15
bprc.me/FMS_F18
bprc.me/FMS_F4U_Corsair | bprc.me/HH_FMS_F4U_Corsair
bprc.me/FMS_Flash
bprc.me/FMS_Fox | bprc.me/HH_FMS_Fox
bprc.me/FMS_Futura
bprc.me/FMS_Maule
bprc.me/FMS_Moa | bprc.me/HH_FMS_Moa
bprc.me/FMS_P39
bprc.me/FMS_P40
bprc.me/FMS_P47
bprc.me/FMS_P51
bprc.me/FMS_PA18
bprc.me/FMS_PC21_Pilatus | bprc.me/HH_FMS_PC21_Pilatus
bprc.me/FMS_Pitts | bprc.me/Pitts
bprc.me/FMS_Rafale | bprc.me/HH_FMS_Rafale
bprc.me/FMS_Ranger | bprc.me/HH_FMS_Ranger
bprc.me/FMS_SkyTrainer | bprc.me/HH_FMS_SkyTrainer
bprc.me/FMS_SU27_J11
bprc.me/FMS_T28
bprc.me/FMS_Viper
bprc.me/FMS_Yak130 | bprc.me/HH_FMS_Yak130
bprc.me/FMS_Zero
TOWER
bprc.me/TH_ASW28
OMP
bprc.me/OMP_Bushmaster
bprc.me/OMP_Challenger
ARROWS | HOBBY ZONE www.brianphillipsrc.com/arrowsrc
DANCING WINGS | DYNAM | XFLY www.brianphillipsrc.com/bitgo
E110 bit.ly/3yVniit
E120 bit.ly/3OOmlOi
E150 bit.ly/3vHM7Le
E160 bit.ly/2DXmEGU
E180 bit.ly/30RKwE8
E200 bit.ly/3RemwEd
K123 amzn.to/2EerkpG | bit.ly/3PKg5r6
K124 amzn.to/3bqGF9F | bit.ly/34BaZXP
FW200 bit.ly/3LVXu9Q
VTOL amzn.to/2zwNvaV | bit.ly/2TTq4Qn
ASW28 amzn.to/3A8D5bS | bit.ly/2VlLtBm
Phoenix Evo amzn.to/3nX4okg
Spitfire bit.ly/3smaEWE
BF109 bit.ly/3rlrUen
T28 bit.ly/3398xse
F4U bit.ly/3h3OhNI
P40 bit.ly/3OTlUSK
P47 bit.ly/30hZiqN
P51 bit.ly/2JQDtDj
F22 bit.ly/39Zvf6r
F16 bit.ly/2YTmTKg
F16 50mm bit.ly/3Kga0Av
F18 50mm bit.ly/3mm9xSY
#rc #airplane #viper
Camera crew, I for one enjoy seeing the different ways that Brian manages, and organizes the cables as well as the banter between you both. Thank you!
Thanks Rich! Glad you do, and I fear it drives people nuts watching me try to get the wires "neat"...but my OCD tendencies rarely let me relax until they're as good as they can be made to be (easily)... Glad you enjoy it!
We love you Megan thank you for what you do!
At 1:28 you had me tearing!!!! Kudos to your wife she knows her stuff.......RESPECT!!!!!!
Thanks Brian ,
For the help and you're setup information i needed to get familiar with the NX8.
Danny
Regards
You're welcome Danny!
Appreciate you setup and flying vids……thx for taking the time….entertaining as well and great skills
Sometimes dipping plastic in boiling water will return it to original form and remove stress marks.
You guys are the best just got my viper and put it together the same time you did yours and yes landing gear are a lot better than the older version.
I Learned slot fo you brain. Thank you very muc. Well explained. Very good video. You take your time to Explain
I feel after so many videos that the camera crew is like the neighbor in home improvement lol
People may not acknowledge but honestly the highest curiosity regarding every edf plane is regarding its
1. max possible flight time with heavy batteries 2. ups & 3. retracts.
It would be great if you give detail closeup blue light look of all inlets and cheater holes and of retracts holes demonstrating their functioning & even retract servo operation & mechanisms from underneath.
We can look into this soon. Thanks for being here with us!
I finally pulled out the factory extension system and installed my own, shorter extensions. I had to put extensions on my flaps to even get them into the fuselage so I could connect to the Y on the receiver!
Very cool 😎
Thanks!
Hi Brian. In the manual it say use Switch F for Aileron. Switch C for Elevator. Switch G for Rudder. You can programme The NX10 so each switches talk to you when you switches them. If you forgot what swicth F is assignto do tap the switch and it tels you Aileron, tap next one Nx10 say Elevatror, Tap next switch it say Rudder. All switches on NX10 can be named like the Trottel cut on/ tottel cut of etc. That mens you have full control of all switches what they are assign to do for you. I have done that on my E-flight RV-7 And i am about to do the same with Viper 700mm EDF that i just bought januar 2024.
yes
Thanks!
Thanks Bill ;)
Good camera work. Really. Thanks camera lady. Usually very good picture.
She is dang good! thanks ;)
Thank you so much for the Viper 70mm radio set up. Never would have figured it out. You had the same issues I did and showed how to fix. PLEASE go a little slower when you are rolling through screens and tell what you are doing. You do well, but sometimes you fly past something critical.
Glad it helped and if you do want slower, have you considered clicking onto the GEAR icon on the video player, and selecting the SLOW playback...you can do as slow as 0.25 X which might be too slow, but it might give you the edge you need. We try HARD, and fail for many, to strike a balance between going too fast and too slow.
Hope this helps, and makes sense!
I have Safe Select (Safe, AS3X, no gyro), thrust reverse, gear, flaps and 3 axis control set up on my 2000mm T28 using my NX8. The thrust reverse is on the bind button. You do not need a NX10 to set it all up.
Awesome…..right after buying the Fms V2 lol. I’ll have to hold off on this one till a crash happens
Hi Brian, I like your show and I learned a lot from it, that's a interesting concept of running your wiring harnesses through the airplane, try using a snap swivet tied to a piece of thick fishing line or a a piece of wire to pull the wiring harnesses through, a little trick I learned from wiring guitars
Thanks, and thanks for the tip!
Great video man! (As always)
Do u know the official release date on horizon hobby?
Hello Brian, great videos i have the orange Viper 70mm and an NX8 Transmitter i followed your switch settings and set up for the plane but i don't know how to set up the gains dial for safe and as3x ? i want to be able to adjust the settings .Does the plane need to be bound for each settings program.?
Hi! Can I use thrust reverse on a spektrum dx9 transmitter? I mean how do i check wheter i can enter the avian programming cause i've seen transmitters not doing that
Awe man I love it. I just came across a clean V1 version for 250. Should I get this or buy the blue one and upgrade the gear?
Why buy the blue one ,the new orange one is much better upgraded motor , landing gear ,soft wheels and even cheaper.
great review, are those 2 ferrite rings really needed? or that's something it can be removed to save some weight ?
If you're working for the FCC - then by ALL MEANS - they save little children's lives - LOL LOL LOL - take them out if you wish. They're a complete waste of time, space, and weight, and only have to do with RF interference that might cause an issue to some ultra-nerd (even more nerdy than ME!!!).
When Horizon Hobby makes a model, they follow ALL the insane rules, which is why they will often times cost a few dollars more (and yeah, I mean a few - like $10-30 more on a $250-$750 plane) - compliance while making "toys" for us adult men, is just tediously annoying to even discuss. What eve happened to "freedom"?
Thanks for understanding my annoyance, and please understand it's not with YOU or your question, but is with these insane over-reaching, bureaucratic rules, we all get the privileged of following, but not being able to vote anyone out when they make more and more and more of them!
Thanks for the previous information.
I used your setup for the Viper 70mm v3 with safe and throttle reverse with pilot fatigue all the channels are used up. There is the bind port on the AR631 receiver thats empty but i dont know how to use it. I want to install the KM After burner but i need an empty channel .I was thinking i need to get the 8 channel receiver i have the NX8 what do you think to do.
Bind port is NOT a channel, BUT it will have power, if you're just looking to steal BEC (usually 5VDC or so) to run the Afterburner ring.
IF you need SIGNAL, then you can usually "Y" off the Throttle channel and make this sort of thing work. This is as simple as using a SERVO SPLITTER CABLE like this amzn.to/4bKXO8S (for example...you probably already have one or more lying around).
If you have issues getting it to work, there are some issues with the way SERIAL communication is handled between SMART ESC and the Rx, so if you can't get it to work, this MAY be an issue, and I believe that RC Geek has a compatible solution...just a thought, and he's a super nice guy too (Chris) - we're actually kinda "competitors" on CZcams, but he has a great little website... P.S. I'm not an AFFILIATE of his - www.thercgeek.com/
What elevation correction did you end up going with for takeoff and landing flaps…. I listened but can’t find it. I thought you said you found something that worked better.
Hi Brian I’m from Cyprus and I want to ask you if the viber can fly with 4s battery or you must fly with 6s.Thank you ❤
Are the tires rubber, like Dubro Low Bounce, or just softer foam? I changed my wheels/tires out for Dubro Low Bounce, they are 🤩🤩🤩
Softer ;)
Nut and bolt set.
yes, THAT thing ;)
1:13:45 you said "I'm going to press this button" what button is that? Mine doesn't have a button, lol. Also, do you not use a bind plug?
What receiver are you using?
@@BrianPhillipsRC The rx that comes with it. I ordered mine two weeks ago. Maybe they upgraded the included rx since the time you reviewed this one? Great video btw!
Brian,
After 15 years I am back to RC again. Everything has changed and I don't know anything about the new technology. Is there a current instructional book on how to match all the spectrum merchandise? Lost again. I have purchased a NX10, new ducted fan jet, etc Hobby zone I bought new btry and charger, but the cords don't match and Hobby zone doesn't tell you what you need to work. Just what you might need. Where do I get more info on the hobby
The RC industry has changed, for the worse I'm afraid. The days of modeling are pretty much over. About the only thing seen at the field anymore are cookie cutter made in China ARFs. Not much to get excited about. When Horizon bought out Hobbico from Bankruptcy they discontinued most of the line. Kits are all but non existent as well as glow engines. Now days people would rather spend ten hours a day on their "Dumb Phones" then building models.
Can anyone help me find out why my NX8 is not showing the menu options for first time as3x settings and the gains also the safe first time options as3x and safe is working but not getting the setup menus.please help.
This type of question may not going to give enough information for most of us to help, but I'll give it a shot...
Press the BACK button, or ESC button to back out, if you want to get out of "Forward Programming" - you might have your throttle HIGH, which might prevent you from EXITING, which would cause an unsafe condition...possibly making the throttle engage.
If that doesn't work, unplug your plane, if it's plugged in, and then power down the NX8.
If it won't power down pull the battery.
Once rebooted, should be up and running from scratch...but if not, then you should call up Horizon Hobby tech support and get some help there.
is it your birthday brain?
Nope
why does it say happy birthday in your house@@BrianPhillipsRC
Quick question for anyone here. What's the big blue prop plane on the kitchen table behind M called? I'm slowly catching up on older videos here and want to look it up. Thanks in advance.
Edit 39:06 - In front of M
F7F Tigercat
@@ernestostrman5147 Thankee, Sai!
FMS F7F Tigercat 1700mm
So now Eflite has the FMS version of the 70MM viper, so why can't FMS make a US version of the 90MM Viper???
You can always buy it from China like all we in Europe do
What about cutting the hole a little bigger for the wires for the wing to make it easier for installing the wires
Darwin awards
Landing gear ok, but poor..needs a ankle style joint so get more softness on grass and tarmac, stops bouncing and gear being ripped off..
The new softer tires and shock-absorbing struts minimize/eliminate bouncing on all surfaces! Have you actually watched any of the videos showing it landing on various surfaces?
Why would you want to pay $350 for this it's the same Jet like the blue one is they haven't upgraded anything on this just change the color l rather have the blue one for $300 than pay more
You get a more powerful Smart ESC/Motor and upgraded landing gear for the same price as the original before it was discounted and discontinued. But overall the same yes.
Bought the plane off your video. BUT please don't waste so much time testing AS3X. If Safe is working correctly and you can hear the servos move in AS3X THEN AS3X IS WORKING CORRECTLY. IF YOU DO NOT HEAR SERVOS MOVE WHEN YOU MOVE THE AIRPLANE AS3X IS NOT WORKING, LIKELY NOT TURNED ON! Test Safe first then AS3X. That would have saved about 5 minutes of this video. Great twist on Throttle Cut but I prefer Motor On/Motor Off sounds. It's one less word and more directly conveys what you did with the switch change.
So apart from the colour and 85amp smart esc, this is the same as the 15th anniversary from fms right?