How to Vinyl Wrap Interior Trim | Step by Step | EASY
Vložit
- čas přidán 25. 06. 2024
- How to vinyl wrap dash trim of a car or truck. In this vid we are wrapping a 2015 mustang interior dash piece that has a lot of different areas and contours that can be difficult when wrapping.
items used:
Vvivid vinyl: amzn.to/3PQ9ITW
Heat Gun: amzn.to/3t7kVFL
0:00 Introduction
0:13 Step 1: Clean Surface
0:33 Step 2: Measure Out Material
0:51 Step 3
1:05 Step 4
1:40 Step 5
3:25 Step 6
4:04 Step: 7
4:43 Once vinyl has formed around peice trim excess leaving about 1-2in
4:59 Cutting the holes for the cooling and heating
6:31 wrap excess around back side This also provides extra hold for vinyl
8:06 Continue Process until all flaps are secured on back side of piece - Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
![How to Change your Car Interior to Real Carbon Fiber (Carbon fiber Skinning/Wrapping) [DIY]](/img/n.gif)
Who's the Man, You're the Man. BRAVO!!!
Haha thank you!
You did a great job and it looks professional. I’m inspired to do this to my vehicle. Thanks.
Thank you, that's why I make content! Hope it helps
Gorgeous job - can't believe the difference and how good it looks - thanks for sharing.
Thank you!
Very helpful. Did my bootlid handle whilst going through your steps. My first time wrapping. I did fine, thanks to you. Much appreciated.
Great to hear it helped man! Thank you
Awesome video. Planning on wrapping my trim in a couple days, will use this video as reference 👌
+robert garza thanks! Glad it helpped
Great Job! My advice to everyone watching, use gloves after applying heat, you can leave finger prints hard to get out, especially when applying black vinyl! Happy Wrapping
Thanx
I just watched a guy try to hand stretch his wrap and it looked so complicated. You let the tool do the work on this one and made it look a LOT more doable and may try this with my next vehicle
Great vid! Direct and simple. Thanks for showing the end process
Thank you!
Nice. Thanks. Thinking of wrapping my challengers interior. This definitely gave me the boost I needed.
Awesome man! Good luck... Hope this is helpful
I stand corrected ! Thank you for the info.
Yea! Just what I needed! Planning on doing my 2017 GT in gloss white. It'll look great with the mods I've already done. Great job!
Nice! Glad this could be of help man
OMG It's awesome! #Mach1project scontent.fric1-1.fna.fbcdn.net/v/t1.0-9/30265280_1747314238648970_7325582631070894598_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHf6bpDI4YgaGd4GJ8ZEB5Jn5LKEqKBVYOf9WTuAN9_9WpBF6QWl2QiVlDukoXTZ-ZN6Ic0uK8ubeCVTWCbRQavTkz2Q4hKo_8wcXLQYMd5hw&oh=218a8d115624bd52e56265485c3b05b3&oe=5B293A4E
Looks very good! Nice work
That was an awesome service you provided! Great job!
Never mine the clips, that was a great job and looks stunning. Thanks for your Vid, I think it will help many doing or thinking of doing a wrap
Thank you!
Thanks for this informational video!
Great informational video! I’ll be trying to wrap the same dash style on my mustang tomorrow, it will be my very first time wrapping anything.
Right on Joey! Hope it helped with your dash wrap.
Finally, a video wrapping a difficult piece. Trying to wrap the center console piece that holds the cupholder on my 2012 Mustang, the inner curve by the E-Brake is pretty intimidating so I gotta watch this lol.
+HexifiedMusic hope it helps! There are a few videos on wrapping tips that helped me with this piece.
How did it go for you? I'm about to do that same piece on my 2010 Mustang
did you ever wrap the center console ?
I’m waiting to hear the results from you. It’s been 4 years 😅 we’re still waiting!
Wrapping around holes/bolts/screws/whatever etc is the hardest part for me!
I'm wrapping the air jet mask and this video helped me very much! I'd post a video next week. Thanks bro👍
Magnífico trabajo compañero....enhorabuena....
Thats definitely a good video. Thanks.
Wow! More techno! Just what we needed!
Glad I found this video, looks clean af. My first attempt wasn’t great on the edges or the holes.now I’ll be using the techniques 👌 thanks
Hope it helps man!
Nice video the 3 bad comments below me made me want to watch this because i knew they were wrong.
Looks awesome!
Very impressive! Great job!
Thank you!
Nicely done!
Looks great
Thank you
nice work man
keep it going
+Ibrahm Kuari thanks man!
Great video! Love the music and editing! You make it look easy! Great job dude!! Liked and Subscribed!!!!
Thanks my man!
Thanks for the knowledge, great job...
+peter c hope it helps!
very very good. cool finish.
Ameising!! Well done mate
Thank you!
Thats some nice work !
Awesome video man. I'm a fan
I appreciate it!
Great vid, thank you!
Thank you!
Good video, good job. Thanks!
Nice man,now i will try it too,tnx
DAMN it came out GOOD... Thanks, I'm gonna give it a try.
Nice job! This is a handy video.
Awesome video👌😎
Great vid, the corners are always the hardest part for me.... Im gonna try your method 😀
My only issue when applying vinyl wrap is when i have to do corners. I often have to cut the vinyl in the corners to split it, just so i can lay it over the corners, and that usually leaves me with a gap between the vinyl or an overlap. :/
If your doing that you got to much overlay. Idea is tighten heat tighten heat for corners. Never try to cheat an do the Y split. It'll come up later an has a chance coming undone at that corner
Cutting for relief tends to help but from what I've seen you only do it once you got it completely around your piece. The cut should just go up underneath the lip on the other side of your piece
Thank you for the edumication.
Great video!!! I plan to do this also, seems like it just takes a lot of patience!!
Nice little video mate thanks a million very helpful👍
Glad you enjoyed! hope it helps
My
I suede wrapped some trim pieces on my 2018 sonata (stock carbon fibre look) it looks great.
Thanks. Very helpful.
Thanks
Just did mine with vivid matte black but mine was alot thinker so it didn't good down like yours but it turned out great ty for the video give us more of wraps buddy
Thanks man! I just may do that
Very nice good job
awesome job bro...awesome music choice
Thank you man!
Totally awesome job❣️👍🏻❣️😳😊
Thank you! 😊
ima do this to my car hope it turn out good
Nicely made video 👍
Thank you!
Looks darn good
Thank ya sir!
Thanks a lot man the other videos only showed how to wrap flat peices without any holes or anything in them this vid helped me a lot
Glad to help!
Looking good!
Thanks!
Just wrapped my PC case with some Faded purple foil and Carbon fiber
That probably turned out pretty awesome
Nice . Look awesome..
Great job bro
Thank you my man
You are the first video that I’ve ever seen that actually removes the backing the right way. I was just placing my ford performance decal the other weekend and my gf was pulling straight up and I had to school her when she almost ripped the F off lol.
you say it right >>>SHOULD look like this .. awesome Job BUDDY ! gunna try on mY JEEP ! ty bro
Thank you! Hope this helps eddie.
@@HereWeGoNow it sure did..ALOT ..TY AGAIN
You left out the hardest part, getting that part off the car without breaking the ~50 little yellow or blue clips on the back, that ford doesn't sell separate.
+Robert Baldwin haha! I didnt have too much of a hard time with it. Thought about doing a seperate video for that actually.
Robert Baldwin ford dealer doesn't but Tasca parts.com it does 20 30 cents per piece.
If they do, I can't find them.
Robert Baldwin part nr. W714972-s300 bezel trim clip. Make sure u go by Year and model
+dan deac very helpful! Thanks
Iso took the finish right off my shifter trim!
Good job 👏
Thank you!
Thank you so much, exactly what I was looking for and was wondering about
Hope it helps
nice result
Thanks!
Hey that looks really great I've been trying to learn how to wrap. I've got a tail light to do door panel pieces and wanting to do my hood
Nice work brother
Thank you
thank you for a great video with step by step on something harder than a simple piece .. perfect finish brother
Nice job
Thank you
Nice i luv it
Super!!!
Looks great. I was wondering if I could use a hair dryer since I don’t have a heat gun. Would that work as well
nice job!!!
Thank you
Nice!
Nice job! Gonna try this on some side panels on my bike. Any recommendations on a quality carbon fiber vinyl brand? Seems to vary wildly in price.
Nice video
Thank you
Will this come off with heat in winter or loosen up with liquid spillage etc? Is there a glue that you can use on the corners to keep it from shrinking?
great video. How is this holding out so far?
Actually did this on the interior pieces of my Mini Cooper. I've been a collision tech for 43 years, but this was the first time I've ever tried wrapping. Came out pretty nice, but now after a year, the edges are coming loose. Not sure if that's from improper prep, or not enough heat to form it. I've done a few smaller projects since this, and still have the same probs. Always seems to be how to 'slit' , heat, and fold to get around curves and edges. But, You did a great job! ;)
Not enough excess and post heating!
Excellent - can you do this with a Parrot Disco?
Thumbs down if you are a real troll. He wrapped that perfect. Can't wait to give it a try.
Haha...Thank you!
Thanks for this video.
Did you ever wrapped plastic PP (Polypropylene)? It's usually found on car bumper (bare substrate/bare plastic).
Can vinyl stick to it? Or should I spray plastic primer or adhesion promoter first?
Need advice here. TIA
Informational!
+Dallow thanks!
Can't stand fake carbon fiber, but this video was perfect! Thank you.
Hope it helps! Thank you
Omg doing mine was sooo hard cause it very curvy 🥲 took like three hours
nice
In Automotive and motorcycles, I hate HATE fake carbon fiber!!!! With that being said, holy fuck stains Batman!!! Your shit looks factory clean!!!!! Awesome job. 👀👍🏻🇱🇷👍🏻🇱🇷⚾️👀
Haha thanks man my!
Hey dude. Great wrap. I'm doing the interior of my car. Problem is, the wrap I have has a see through layer on the top too. Do i take that off or leave it on for protection? I'm not sure what it's for.
Thank you! Remove it. It's just to protect it before you start wrapping. Good luck!
quick question! could you apply this to shells of small electronics? and would a hair drier work? if not, would the heat gun melt small plastics on electronics?
greate video budy you got like and new sub from me
i have done few small pieces in my car but i want to do intire dash and center console but i heard sun light makes it yellowish is it true and is this something permenent or i have to remove or revynl it like after a year or two
once again thanks
I'm having problems with the right angled corners. Do you overlap the vinyl? No matter how hard I try it can't be not overlapped
Can you link the last song that was played in this ? Great video btw :)
I'm trying to wrap my hood vents on 2016 gt gloss black... Will try
Good luck!
Thank you for this video! I've wrapped my interior trim now. I just cant work out the last corner and ruin the look of it
Nice and very professional job. I always wanted repair the parts of the manifolds that come in chrome appearance, but I'm lost and don't know where to get it. Some ideas and videos that can help me??? I really appreciate. Cheers.
Thank you. I'd check on Amazon for chrome vinyl wrap. Should have a big selection. I really like vvivid vinyls product.
@@HereWeGoNow Excellent idea!!! You know, a good friend has a Sentra 2016 and someone smashed the front grill, the situation is that it isn't broken, just the vinyl cover started to peel off and I think it could be fixed without spending hundreds of dollars.Thank you very much for the helping.
I don't think vinyl is a good idea for a manifold that produces heat. The wrap won't last long and will peel up quicker or am I wrong? Seems like on engine parts powder coating or painting would be best.
Can you do stuff like the silver trim around the vents and steering wheel without taking the parts off?
Great video. What is the title of the first song?
Cool gear s3 classic)
I ordered black glitter vinyl like sandpaper kinda material. Is this a harder vinyl to work with?