Spark Plugs from 2015 Mitsubishi Mirage 1.0 Replacement
Vložit
- čas přidán 2. 07. 2024
- How to change the spark plugs on a Mitsubishi Mirage / Space Star from 2015 . You will see the gap, issues with the plugs on this car , change interval, and more when it comes to changing the spark plugs replacement.
Spark plugs in this 2015 Mirage were the NGK 93298-4PK LZFR5BI-11 .
Disclaimer :
This youtube channel :"doit_vehicles " can not guarantee that this information suits your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk . - Auta a dopravní prostředky
Mirage Fuses & Relays Layout Video : czcams.com/video/tU5Wcu4qewU/video.html
Very good! This is the best one I have watched
Superb. Wow. Thank you. I subbed because this was just so much in detail.
ive seen several ppl NOT remove the connectors, is this a must?.. thank u for any reply qnd ty for the vid regardless
Thank you for this video.
have two questions for you.
Should the spark plug have anti seize in the threads?
Anything else I should change out while I am in that area. My mirage has 138k miles.
Thanks once again for the video.
Depends on the spark plug ;most of the brands now don't need antiseize
Thanks for the quick reply bud.
Plugs are in route for my mirage
Do I need to change the boots?
How reliable has this 3A92 engine been ? just regular servicing is required or anything special needs to be done ?
-Overall how has the long term experience been ?
-I saw all your Mirage videos, looks like all the parts are easily accessible for servicing and can be done at home?
I currently have a Honda Prelude so compared to that this Mirage's engine bay looks more accessible. EGR valve, serpentine belt with the alternator as a tensioner, electrical power steering etc ..seems like its easier to service and maintain.
-I understand 3A92 has port injection so not much issue of carbon build up on the valves ?
Hi !
In my possession, the fuel pump had some problems and I replaced it . Overall it's a ok car for the price . It might be challenging to order some parts like the wheel bearing from what I heard ( depending where you live ) .
If you consider buying it , the best is to of course, inspect it as much as possible; Good maintenance on time can make any car run much longer than average
I in my opinion the components feels low quality and the engine has nothing out of the ordinary thus the impression of DIY friendly.
Yes the intake valves will not get carbon build on
Hi mate, I hope you are doing well. I have the same car and I facing the following issue: When I turn the key slowly (before the start point) the lights in the panel turn on (as it should be) but once I turn the key to the start point the car just "die" (also lights/radio/panel turn off). The only way to make it work again is if I open the hood and close it firmly, or wait for 5 to 10 minutes until the energy comes back and I can try starting the car again. I'm 100% sure that the battery is not the issue (is a new battery) and if I try a couple of times (doing the way I said) the car will work. Do you know what could be the reason for that? Thank you a lot for the video. Cheers
A bad ground cable to the battery or alternator, or the starter.
how to change the sparkplug oil seal?
you mean the part of the valve cover gasket ?
@@doit_vehicles yes !
Ugg I see you making videos? Lol Feel like a stocker this is crazy
Is it normal the zylinder 2 ? Oh no ?
Did he say 16 mm socket to take out the spark plugs
probably
What language you speak? it seems afroenglish......
Madagaskarian