Front tyre wiggles from side to side. Fixed! Repaired! DIY

Here I'm showing you how my front tyre wiggle from side to side and how I fix it!
This happened when I had to remove my CV axle on the left side of the car due maintenance reasons.
Once I installed it back, it happened that issue! The whole tyre started to wiggle from side to side, causing vibrationn while driving, vibration in steering wheel while turning as well.
So what is actually happening in this case, the CV axle central collar nut was with damaged thread and that cause not fully tightened CV axle to the wheel bearing, and that causes the bearing to move out from the hub carrier and creates that side to side wiggling. I have replaced the wheel hub carrier with bearing as I showed you in the video, but that did not solve the issue, then I saw the damaged thread on the collar nut so I had to buy new one and tight properly the CV axle! I pressed my old wheel bearing back to the hub and reinstall it back to the car. If you have strong impact like the one bellow which I really like, the central nut will tight the wheel bearing to the carrier and return it to it's place.
Milwaukee 2767-20 M18 FUEL High Torque 1/2"
link to✅👉 Buy it from here:
amzn.to/49AQdYT
Central nut OEM number: M27x 1,5: 33411133785
✅👉 Buy from here: amzn.to/3SXARXg
Wheel hub with bearing OEM number: 31226867808
✅👉BUY from here: amzn.to/4c2yrPN
Wheel Bearing press kit:
✅👉Buy from here: amzn.to/3IIucf3
➡️ Please rate 👍 , comment ✍️ , share 🔗 and subscribe 🔔 for more videos 🎞 : / @superfastdriver
➡️ Join our channel 👇 to get access 🗝️ to perks:
/ @superfastdriver
***DISCLOSURE: Some of the links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase. Affiliate commissions help fund videos like this one.