Viking / Gas Range No Spark or Flame Igniter troubleshooting. Quick Fix
Vložit
- čas přidán 24. 07. 2024
- Viking replacement igniters (as seen in video) - amzn.to/2HG6N0f
Viking Appliance Tytronics 0+4 Spark Module (if you have 4 burners) - amzn.to/2HJ8BoX
Viking Range Tytronics 0+6 Spark Module (if you have 6 burners) - amzn.to/2HEOb0F
www.modsandprojects.com/vikin...
If you are reading this post, your Viking igniter units are likely having some issues.
Not to worry; fixing both of the two most common Viking igniter issues are simple DIY jobs.
Let’s start by giving credit where credit is due: Viking ranges are built like tanks; they last a lifetime with proper care and maintenance. As with most top-of-the-line brands in any appliance category, a premium price tag often comes with similar high-price support and service calls. High-price support and service calls are definitely not my cup of tea, especially when we can fix the issues with a few simple parts! The igniters and the spark units are universal parts so they are compatible on all classic Viking ranges. Let’s take a look at the two most common igniter issues:
Issue Number One: No spark on ANY burner.
Turning a gas knob to the “ignite” position is supposed to light that one burner, In addition, there should also be a visible spark on all of the burners (4, 6 etc,) when attempting to light a single burner. When attempting to ignite your stove and there is no spark on any of your burners, you have a bad spark module. The fix is very straightforward. Note: If the spark is only missing from one or two of your burners, then skip to “issue number two.”
Order the authentic Viking spark module. The part you order is dependent on the number of burners your stove has. Here are Amazon links for the 4-Burner and and the 6-Burner spark units. (If you need other configurations please leave comments below and I will try to help out).
Unplug your Viking stove from the wall (important)
Locate the spark module behind the unit, after that, take a picture of the wiring before you undo anything.
Replace your old module with the new module, then make sure you replace the wires to their original positions on the new spark unit. Done!
Issue Number Two: The igniters continue to spark after the gas burner is lit.
This is an issue with one (or more) of your igniters. The white, vertical component that the spark jumps from on each of your burners is called the “igniter”. The function of the igniter is actually two-fold. It creates the necessary gap that generates the spark to light the burner, in addition, it also senses when the burner is lit to let the spark module know to stop sparking. In time, the igniters often become fouled or worn due to normal use and will need to be replaced. Here is a link for a universal, authentic Viking igniter (you will need one for each burner). I recommend ordering a set (depending on the number of burners you have) so you can use the new units to identify one or more bad units. You can always return any extra units once the bad igniters are identified and replaced.
Viking genuine replacement parts (spark modules and Igniters) in the description - Please consider using my referral links if you liked this video!
No spark? = Replace Spark Module - Link In description (make sure to buy the unit built for the # of burners you have.. #4-#6-#8 etc.)
Sparks wont stop sparking after burners are lit? = Clean/Replace Igniters. Link In description
Thank you so much. My problem was that the oven igniter would not spark. The stove had been moved around quite a bit while our floors were being replaced. I found that the wire had become disconnected. I also found that I had to crimp the connector to get it stay on.
One aside, I wished you were showing my problem because I ended up trying to do all of the work from inside the oven. 90 minutes later when I had trouble getting it put back together, I thought to myself "I wonder if the panel below the door would give me access?" Two screws and there was the wire connection to the igniter. 10 minutes later I was done. You live and learn. 🙂
I had the exact same problem that this video helped me diagnose. I swapped the wire with another burner and the problem followed the wire. I abraded the contact surface with an x-acto knife blade and tightened the contact and used contact cleaner. That fixed my problem.
This was a very good video. You are a pro. Thanks Man 👍.
That was so cool to see what you are doing and hear you explain. Thank you.
Thanks for the excellent video, appreciate it. Stupid question for you...I have a similar Viking VGIC3074BSS stove. What's the best way to get the black top metal panel off so I can get to the ignitors, the way you have it open in the video?
Hi, I have an issue with the broil ignitor of my Viking stove. Sometimes It works well. However, the other day, when I turned the nob to broil, it seemed to be working fine but after 5 minutes it made this "wouf" sound and the oven door opened and closed for about 1/2 inch.
I have the same or similar range (Viking VGSC306-4BSS). Thanks for showing two potential reasons why a top burner might fail to spark -- I'll check for corrosion at the igniter mounts and the spade connectors. Mine doesn't have the same issue -- all 4 top burners spark and ignite dependably *except* when the oven is on and quite hot -- then *no* top burner that is not already lit will spark or ignite until the oven is turned off and cooled down somewhat. Because the behavior is all 4 together, I doubt it's the top igniter wiring (but again, thanks for your clear and informative video). I'm currently researching whether the spark module/controller might be disabling top burner sparking because it thinks something is amiss when actually it's just too hot.
Hmm..interesting. there are no electronic components topside other than the wiring and igniters which should not be affected by an increase in temperature. the fact that all four units fail to spark when your oven is at temperature would lead me to believe something is wrong with a shared component.. perhaps the coil?
let me know when you figure it out so if it ever happens to me I know where to look!
The only shared component I see is the "ignitor module" (the brains of the operation; Google "Viking PA020041"). It is also topside, under a metal shield that also covers the 4 solenoid gas valves. Beneath all that is the slide-out crumb/drip tray, with the oven compartment below.
@@jciccare2453 John, did you ever figure this out? I have same issue (oven on & hot and burners will spark but not ignite unless I turn oven off).
Hi! Very helpful video! Does the spade connector need to be high temp? And what about the voltage? 300? 600v? Thank you
Thanks so much for the video. I have the same stove and I will dismantle it and start the process of fixing it with the help of your video. My only question is, what size spade connectors did you use? I'm not sure if that seems to be the problem with my stove with the clicking and not igniting on its own, but in the event that it is, I want to have the proper replacement items.
I have a viking cooktop 6 burners. Do you know how to access the components? Are they all from the top or are some from the bottom? thanks
I have the same burner assembly on my viking, but I can't get mine to quit clicking. I cleaned the ignitor. Any suggestions?
Hey @lincoln jeon + @mods&projects, I have a 4 burner viking - left side ignites well but right side does not ignite. I tested with a screw driver and the spark appears. Any idea what the next step in the process is?
Also, the oven light burns out in less than 3 days. Any idea if this is another issue I can DIY repair?
Many thanks!
After I removed the burner, it still clicks. Now, is it the valve assembly under the knob or the box, where all the wires come out of?
Where should I get the sparkling heads that need to be replaced?
I have the same stove and igniter just two extra burners. I replaced the spark module for the 4 left side burners. When I turn on any one of the left column burner (front or rear), the middle burner ignitor starts to click continuously non stop. But If I light the two burners simultaneously (rear and front) of the left burner column, no click occurs. If I ignite the middle column burners, all work well. Any advise?
Thanks for share!
My Viking range lights on the flame, but spark it does not stops. May you help me?.
I would try new igniters. You are getting a spark so you probably don't need a new Spark Module (if one of the two or a combination of both) - Start with the igniters.
Hey where is the sparking coil you said, not the spark module because I have one and there is no spark and I have replaced the spark mode before, but still no spark
Thank you for such a great informative video and a very detailed caption above! Question: I have a 4 burner Viking, the 24in VGIC245 model. The two right burners are fine (often they spark click to no flame until you turn them off and try again, 2nd time being the charm).
However on the two left burners, there is only gas coming through, while the only spark clicks that occur happen on the right burners.
What do you think the fix is?
1) replacing the plugs as you have beneath the two left side spark posts
2) Cleaning the spark plug heads with steel brush and cleaner
3) replacing the stove's spark module altogether
THANK YOU in advance for any help you can provide!
Replace the spark module
Great
I'm sure your wife was thrilled with all the tools on the cutting board.
What is wrongg if it sparks and lights, but the spark keeps sparking after the burner is lit?
Would you know why my Viking rangetop only works with a light? None of them turn on by themselves. I always have to use a lighter for a flame to appear
Bad coils or igniters probably coils
I have a 30" 17 year old viking range and the oven is not heating properly. What happens is that only the right oven burner ignites. My first step was to replace both burners but still only the right ignited. I assumed the ignitor on the left simply wasn't hot enough (being old) so I switched the left and the right to see if that was the issue. Once again, only the right side ignited so it's not the ignitors. Could the gas regulator be at fault? Any suggestions?
My Viking stovetop kept sparking even while off. I would clean the stove which would temporarily fix it for a couple of weeks, Not it just won't click and have been using a lighter for months. I have a VGSU161-6BSS. Is the module easy to replace? Great video bro!
I have the same issue! How much does the ignition module cost, and what's the model number?
I have the same style Viking range (except 6 burner) and recently lost power to igniters on 4 burner side only. I replaced spark module (on 4 burner side only) and all igniters worked, except now sparking would not stop unless all 4 burners were lit. I then replaced igniter switches on the 4 knobs and the same sparking problem continues, unless all 4 burners are lit (stops when 4 are lit). I am going to try and replace the igniters, ever though they all spark. Maybe they are not sensing the heat, although they worked fine before the module went out. Do you have any input?
could be a ground issue
I don't hear any clicking anymore on any of them but gas is out, what to do
Same issue going on with my ultra line. As of this morning I get zero spark. Any recommendations? Thanks.
0 Spark would indicate the need for a new Spark Module - I have links for the 4 and 6 burner part in the description.
ModsAndProjects thanks for the reply back. I had a tech in the other day and yup thats what it was. I am going to order and install myself. The tech was good enough to show me where it was located and walked me through the uninstall/install. 👍🏼🇨🇦
@@neightjay You could always use my link ;) The part is OEM Viking (not a knock off) at a good price!
I tried this on my stove, but there's no spark coming out from the wire. It's working fine on the right side. Do you have a video for fixing that problem?
His model is a four burner with just one ignitor module that clicks all four burners. Larger models with a six burners, or grill in the center have two spark modules so that might be your issue (left module bad). Remove the left burner grills, the spill baskets, and then the enamel stove top and look onthe left wall for the exaxt model and serial number so you know what you are working with.
Do you have a special tool to remove the orifice nuts
I do not, sorry =[
Good Morning,
In my case the chams light up, but they do not stop firing the ignitor. Can you help me ?
Try pulling the igniters and cleaning them. Take care to but clean off the white coating on the shaft.
Did you get it working?
@@ModsAndProjects My 20 years old VGIC-365 GSS range has the problem of 2 burners lighting but the spark still coming, still sparking - 2 burners work correctly - I replaced one igniter post with a brand new one, and no change on that burner - the thermocouple, the sensing that the burner is lit, seems to not be making the spark module stop generating spark - could it be the wiring, i.e. corrosion, as in your case above?
or is more likely that that spark module ($180!) needs to be replaced again (last replacement 2013)
@@rldel99 Since you have already replaced the igniter post, it sounds like the spark module again. Maybe your is in a location where it is getting wet (perhaps from cleaners)
?
Run into a lot of problems when they become strip from lack of corrosion
Agreed. when the igniters waer down or get junked up they will need to be replaced - The links are in the description if you need any.
We decked our kitchen with all Viking appliances.........our dream kitchen, and wow are we disappointed with Viking! Fridge and stove are now out of warranty, and now they won't return calls for the repairs on the stove and they even admit it is a design flaw, oh they let us now the problem and the repair is way north of a grand not including labor. Funny....my old GE stove which I gave away for our high end Viking is still working and has never been serviced. We still have our old GE fridge in the garage...still working and I dropped it on its side moving it. We've had our high quality Viking appliances repaired or the guys out at least 7 times. And I do not recommend this company no way! I will be emailing approximately 7000 people throughout my company and my wife's to share my experience!
I have a Viking stove. It is 15 years old and I purchase a warranty plan every 3 years. It isn’t that expensive. I have used it numerous times over the years and as recently as one month ago. I have had to have the 2 igniters replaced several times as the oven didn’t light. Also they replaced the whole door because the rubber gasket kept loosening. Today the top burners won’t turn on..It’s always something! I’ve looked at the new, less expensive stoves, but they are flimsy and cheaply manufactured.
We have a Viking gas range viking range VGIC485-4GQBUBR with 4 burners and a grill/griddle. The two right burner and grill will continuously click without stopping. The grill always lights. The back burner lights 20 percent of the time and the front burner never lights. Help please! A new service man came by and it ill cost 1200$ to fix it according to their estimate.
Have you tried removing all of the igniters and cleaning them thoroughly individually?