Snow Performance Dual Nozzle Upgrade

The Dual Nozzle Upgrade from Snow Performance allows an additional water methanol injection nozzle to be mounted with any water methanol injection system.
Link-
www.nitrousexp...
www.nitrousexp...
Website:
nitrousexpress.com or snowperformance.net
Check out our other social media
➥ Instagram: @nitrousexpress, @snow_performance
➥ Facebook: Nitrous Express, Snow Performance
➥ Merchandise: www.nitrousexp...
Find out more about us here:
www.nitrousexp...

[@al3xuk]

I am liking these new videos but how about some New install vids on 2.0Ltr Engines Like Hondas K20, Na and also modified to Super and Turbocharged, to show the benefits of the system. I'm sure that would boost sales over here in the UK, and europe as we have smaller more efficient cars.

[@reaxions]

How about you show how the hose goes inside the fittings (whether to heat the hose, etc.), how tight the compression needs to be on nylon lines, etc. All the guy did was stand there and talk about what I can read anywhere else.

[@shiftyeyes67k]

Got the dual nozzle upgrade installed, but on the VC100 controller, I can’t seem to switch the power nozzle setting to “ON” it stays on “OFF”. Can you point me in the right direction? Thanks!

[@snowperformance1]

Is the yellow wire on the VC-100 connected to one of the wires on the solenoid?

[@i30n_fb]

is there any benefit going a twin nozzle set up vs single with a bigger jet?

[@snowperformance1]

The ability to run a "power nozzle" which is essentially a second stage of water-methanol for high boost conditions

[@112rorz]

​@@snowperformance1my charge pipe only has one connector port, does this mean I can't run dual stage upgrade? Is the second nozzle supposed to be installed somewhere else with it's own dedicated port or can 2 nozzles run through 1 charge pipe port via a T adapter?

[@snowperformance1]

You'd have to add another port to the charge pipe for the second nozzle.

[@112rorz]

@@snowperformance1 thanks. If the first nozzle injection is in the charge pipe, should I put the power nozzle after the intercooler, on the small silicone hose between intercooler and throttle body? Or 2 in the charge pipe pre-intercooler works just the same?

[@snowperformance1]

Send us some pictures of your setup. You can send them to us on Facebook or Instagram, or email [e-mail]. One of us will be glad to show you where your nozzles should go!