As a retired machinist/toolmaker with also about 10 years automotive machining experience I would have like to have seen more of the engines parts and a good look at those ginormous heads and the combustion chambers.
@@joeschlotthauer840 Yes, the partner stole a lot of unaccounted cash as Mickey trusted him at first. They were the first to promote the huge indoor motorcycle races with massive amounts of dirt brought in to make the courses. The poor guy and his wife were gunned down one morning on the way to work. I have two documentaries on this. As they brought out the car they were both shot in the front yard. They traced the killers down to two that came from Jamaica for the job but it took forever to try and get them and one think died and the other never was brought to justice at the time of the documentary. The trails of this lead back to the partner who was convicted. Mickey was an incredible hard honest worker his whole life with his wife. Also an incredible innovator and racer for his time. If he went after something he usually won.
Right?! These guys are like brain surgeons. Engine looks like new! At first I thought it was a W engine with four heads. When you see the block with heads still on, each head looks bigger than the block.
My father Fritz Voigt was Mickey's Chief Mechanic friend 1959 until 1968. He helped build almost every single engine they raced, but I don't remember my father ever talking about this Indy car monstrosity.
As a kid of the 50’s and 60’s and an avid reader of Hot Rod magazine plus the others, I was very familiar with the MT name and most of his products but I had no idea he’d branched out into designing and building parts this exotic. RIP.
That is impressive! Those engines were quite special. I prefer Fords of that era, but all were quite unique. I love unique engines as an aircraft mechanic.
THANK YOU...WHAT A GREAT DESIGN...I EVEN PUT ON AN APPLICATIIN THAT ONE OF MY LOVES IN LIFE WAS HEARING A FINELY TUNED ENGINE RUN...AND THIS LOOKS LIKE ONE OF THEM...JOHN PLAYER SPECIAL WAS A FAV OF MINE...
Very peculiar and fascinating design on those Mickey Thompson heads! Looks wicked with those big Hilborn stacks. Couldn’t have been easy sourcing information and parts for it, Jason Ore did a great job! Excited to see more videos like this from you guys!
I want to see one of the best drivers in open wheel racing flog the everloving FUCK out of this car on a challenging track. Somewhere like Spa or Watkins Glen or Laguna Seca.
No shrinking violet American Mickey Thompson. Someone had put M/T valve covers on my 454 many years ago, and I wear them proudly. Thompson was a great American innovator.
Noooo! I wanted to hear the damned thing! Watching an engine run is one thing, hearing it is the most important part. You can't see what's going on inside an engine when they're running, aside from some novelty vids. The soul of an engine is in the sound. It's how you know it's living. I know it's how an engine affects the physical world through HP, torque and speed for most people but for me the sound is essence of,, sorry, great video and beautiful car. You guys are amazing.
I really wish that Formula One would let the teams run whatever they want on the engines, cars, aids. I'd love to see what they would come up with if given absolute freedom.
Closest thing to that is the Pikes Peak cars....AFAIK, for their 'unlimited' class, there are NO rules other than safety equipment requirements. Years ago, I used to help a guy build 440 MOPAR based motors at 14:1 for his Coyote.....man, that was some CRAZY stuff back then when MOST of the run up the hill was gravel. Its ALL paved now, which is sad, really.....
My ethnic mate was selling 2 MT tyres in the local buy and sell , he had forgotten about the ad .Later we both went back to his home after the pub . The home phone rings and we hear his mother going nuts . ''Dis boy Mikey Thomson say he live here and they been calling all day''. NO Mikey Thompson live here.
Rats I thought we were going to actually see tear down reassembly and I don’t know cherry on the top with the engine running at the end. Am I the only one that wants to hear this motor run ? Just read some of the comments oh well we’re just gearheads
I remember that Mickey Thompson had a shop in the Long Beach California area. My Dad passed it everyday going to work . It was next door to a place that strength tested ropes and lifting slings to see how much they could take before they failed. I think it was on Anaheim St. but since that's been over 50 years ago I just might be wrong about the street name. Mickey's building was a faded baby blue color and it just said Mickey Thompson on the door and nothing else.
You are right about the location. I spent a few summers working for my father Fritz Voigt at Mickey Thompson Enterprises. My dad was Chief Mechanic for Mickey from 1959 to 1968.
550 hp naturally aspirated 305, not too shabby. I built a high performance 305 once in a 305 vs 350 bet. I'm pretty sure I didn't make 550 hp, but it ran with the 350 it was up against.
In the late 70's top drag racing teams made 550hp+ from 302ci single 4bl carb factory ported and epoxyed cast iron heads.10,000+rpm stick-shift cars on the back bumper always a treat.
What a rip. Didn't get to hear Run. Didn't get to hear any details about it. Just a bunch of pictures. Just a dude that didn't read the script before he pushed the record button.
What would we have to do, in order to be able to hear that BEAST run !? Darn shame to tease a bunch of gearhead with this creation, and not let us hear it talk !!!
For all of you looking to hear this cool engine run... enjoy! Sorry we couldn't include it above. czcams.com/video/PCGr0IR5ZUQ/video.html
Thank you! Love to see more vintage race engines. Smokey twin turbo indy motor comes to mind...
Thanks for yet another shitty video. 😐
And than you have to have a facebook account.... no way! ... keep you sound!
Not everyone is on FB. And, there is no reason you couldn’t have included it in this or other CZcams videos. Very disappointed.
Great video!!!!
As a retired machinist/toolmaker with also about 10 years automotive machining experience I would have like to have seen more of the engines parts and a good look at those ginormous heads and the combustion chambers.
Way ahead of there time🏁
I was hoping to see some details inside the engine & get to hear it!
Poor man and his wife. No one should of ever had an end like they did. Talk about a hard worker and innovator. rip
Was he murdered by a business partner/associate...
@@joeschlotthauer840 Yes, the partner stole a lot of unaccounted cash as Mickey trusted him at first. They were the first to promote the huge indoor motorcycle races with massive amounts of dirt brought in to make the courses. The poor guy and his wife were gunned down one morning on the way to work. I have two documentaries on this. As they brought out the car they were both shot in the front yard. They traced the killers down to two that came from Jamaica for the job but it took forever to try and get them and one think died and the other never was brought to justice at the time of the documentary. The trails of this lead back to the partner who was convicted. Mickey was an incredible hard honest worker his whole life with his wife. Also an incredible innovator and racer for his time. If he went after something he usually won.
@@samiam9059
Thank you for the informative and kind response...
Would Love to hear it Run
Did it ever run?
@@robertklein9190 1968 it did.
that's what I was waiting for as well.
If he didn’t start it I’m out this video in 5 seconds
We posted a link in the comments to see it and hear it run.
What a epic engine. MT was truly a genius.. cars from this period are the most beautiful speedway cars in my opinion
@@stujones3566 you seem to be a troll
Great Piece of History just wish I could have heard it Run👍🇺🇸
Thank you , for Mickey Thompson toys . Wish yaw showed the heads in detail .
Looks like a dohc that’s a funky head setup. Thanks for saving this historic machine.
I was trying to figure out the valve train....not enough info on it ...
Right?! These guys are like brain surgeons. Engine looks like new! At first I thought it was a W engine with four heads. When you see the block with heads still on, each head looks bigger than the block.
My father Fritz Voigt was Mickey's Chief Mechanic friend 1959 until 1968. He helped build almost every single engine they raced, but I don't remember my father ever talking about this Indy car monstrosity.
As a kid of the 50’s and 60’s and an avid reader of Hot Rod magazine plus the others, I was very familiar with the MT name and most of his products but I had no idea he’d branched out into designing and building parts this exotic. RIP.
Working on such an engine would be a dream job!
Excellent review of a difficult build!
That is impressive! Those engines were quite special. I prefer Fords of that era, but all were quite unique. I love unique engines as an aircraft mechanic.
How come we never hear about history like this on the news
THANK YOU...WHAT A GREAT DESIGN...I EVEN PUT ON AN APPLICATIIN THAT ONE OF MY LOVES IN LIFE WAS HEARING A FINELY TUNED ENGINE RUN...AND THIS LOOKS LIKE ONE OF THEM...JOHN PLAYER SPECIAL WAS A FAV OF MINE...
Amazing history.
I am proud that us gear-heads,
rich and poor will go to amazing lengths for our passion
I want my time back. I watched this video hoping to hear it run
Not only hear it run but seeing more of the unique parts used. Especially the valvetrain.
he included a Facebook link where you can hear it run for about ten seconds. 😔
Would have been nice to hear it.
Mickey is a legend. Thanks for something I don’t know about.
Pontiac SD 455
Can’t blame me for trying.
Wow,I just found this channel on accident...Good stuff!!!
Very peculiar and fascinating design on those Mickey Thompson heads! Looks wicked with those big Hilborn stacks. Couldn’t have been easy sourcing information and parts for it, Jason Ore did a great job!
Excited to see more videos like this from you guys!
Nice I wished I had a set of them heads !!!
Mickey Thompson did som radical modifications to engines that were works of art👍
It would have the the cherry on top to actually listen to this motor run . but I guess were going to have to imagine that ...
What, no dyno pulls? Sure would like to hear this work of art and piece of history. Would also love to to see the internals and handy fab work inside.
I want to see one of the best drivers in open wheel racing flog the everloving FUCK out of this car on a challenging track. Somewhere like Spa or Watkins Glen or Laguna Seca.
No shrinking violet American Mickey Thompson. Someone had put M/T valve covers on my 454 many years ago, and I wear them proudly. Thompson was a great American innovator.
Look at the size of those heads! Wow
LOVED the look of the old indie cars. Had a little track car track with same cars.
What an exotic beauty, love this era and Mickey R.I.P.
Noooo! I wanted to hear the damned thing! Watching an engine run is one thing, hearing it is the most important part. You can't see what's going on inside an engine when they're running, aside from some novelty vids. The soul of an engine is in the sound. It's how you know it's living. I know it's how an engine affects the physical world through HP, torque and speed for most people but for me the sound is essence of,, sorry, great video and beautiful car. You guys are amazing.
Only Mickey Thompson could make a chevy 305 make 500 plus horse power!
Not going to show it running lol what a video!
what a BEAUTY!
It helps when I read the comment about the fire up.
Home town for me! Love many of Mr Lyons cars!
I saw this beautiful car at the May 2019 Indy 500 on Saturday, Legends Day. Very impressive.
James Piteo Macomb, MI
Ahhhh...dang it...I really wanted to hear it run...😔
I really wish that Formula One would let the teams run whatever they want on the engines, cars, aids. I'd love to see what they would come up with if given absolute freedom.
Closest thing to that is the Pikes Peak cars....AFAIK, for their 'unlimited' class, there are NO rules other than safety equipment requirements. Years ago, I used to help a guy build 440 MOPAR based motors at 14:1 for his Coyote.....man, that was some CRAZY stuff back then when MOST of the run up the hill was gravel. Its ALL paved now, which is sad, really.....
Need to hear it
My ethnic mate was selling 2 MT tyres in the local buy and sell , he had forgotten about the ad .Later we both went back to his home after the pub . The home phone rings and we hear his mother going nuts . ''Dis boy Mikey Thomson say he live here and they been calling all day''. NO Mikey Thompson live here.
I've seen MT Hemi conversions that used articulated pushrods. Would have loved to see the combustion chambers and valvetrain on this one.
lovely to see odd-ball race only motors like this brought back to life.
It DOES run, doesn't it??
No.
@@bigbluebrownbass shame
We posted a link in the comments to see it and hear it run.
@@bigbluebrownbass it does.
@@carsonridge8978 it does run, see the link we posted.
Damn! I wish we had a chance to to crank up the engine in the video!!
We need to hear it run man
Also just absolutely amazing.
Would have loved to hear it run again???
I'd like to hear more about the gaskets.
Please show more of the work and need to hear that roar of the motor firing up
Might have been nice to hear or see it run.
Would've been nice to hear it run
Have never seen this sooo amazing
Great video, though I anticipated an engine start up to here it, but we’re surprised that they left out the most mportant part of the video.
They took a 305 small block made it a three valve I wonder how much time and money it took on the design aspect of just the cylinder heads
Like to hear it running and revving.
500+ horses out of a 305, without 20 computers managing the whole thing... THAT's engineering.
What a work of upper-end art, wow...1.85 horse power per cubic inch 50 years ago. Sure says a lot about cylinder head flow.
Rats I thought we were going to actually see tear down reassembly and I don’t know cherry on the top with the engine running at the end. Am I the only one that wants to hear this motor run ? Just read some of the comments oh well we’re just gearheads
I remember that Mickey Thompson had a shop in the Long Beach California area. My Dad passed it everyday going to work . It was next door to a place that strength tested ropes and lifting slings to see how much they could take before they failed. I think it was on Anaheim St. but since that's been over 50 years ago I just might be wrong about the street name. Mickey's building was a faded baby blue color and it just said Mickey Thompson on the door and nothing else.
You are right about the location. I spent a few summers working for my father Fritz Voigt at Mickey Thompson Enterprises. My dad was Chief Mechanic for Mickey from 1959 to 1968.
Highly under exposure...
Mint..
Great vlog.
This guy reminds me of that Todd Grande Psychologist, but for engines 😆🤣
Would love to hear it
I would like “Hear” more about this engine!
Make darn sure you put the right kind of fuel in before a start. Always run the subject at hand when spouting off about it.
Tom Elliston had a 14,000 rpm sbc 331 made over 1000 hp ?????
super cool feature!!!
It couldn’t of taken that much was killer to begin with
I would love to have heard the motor run .......
Wouldn't mind hearing it
Scan the heads, and make this available as a kit...
Very disappointing not to hear it run ... I've searched CZcams in the internet not much more information .. I would love to hear those cams !!!!
Needed to hear it run.
There's a year worth of programs like this on Mickey's motors alone....2 cyl. record breaker....hemi-head Ford/Pontiac/Chevy...and on and on.
I remember when Richie Zul made a double rocker trick head for a big block Chevy. Wow, that was a long time ago. I think it was in Hot Rod magazine.
Richie zule? Haven't heard his name in years! He was my buddies partner at one time doing r&d for prostock.
550 hp naturally aspirated 305, not too shabby. I built a high performance 305 once in a 305 vs 350 bet. I'm pretty sure I didn't make 550 hp, but it ran with the 350 it was up against.
In the late 70's top drag racing teams made 550hp+ from 302ci single 4bl carb factory ported and epoxyed cast iron heads.10,000+rpm stick-shift cars on the back bumper always a treat.
@@jeroldlafferty54
There's a big difference between a 305 and a 302. The bore and stroke of the 302 is much more conducive for building power.
What a rip. Didn't get to hear Run. Didn't get to hear any details about it. Just a bunch of pictures. Just a dude that didn't read the script before he pushed the record button.
It's easy to get 500bhp out of an old naturally aspirated Chevy 305 today. The difficult part is keeping it running.
No startup sounds?
I thought race engines didn’t use gaskets and actually used o-rings of sort around all the cylinders and water ports
NOT your typical 305 Chevy!
Everything different down to the 4 bolt mains and undoubtedly the bore/stroke numbers.
60 over327 with aftermarket 283(3in stroke)crank, that's my guess.
i cant stop laughing at this dude reading a card...lol
WTF, You title a story about a 3 valve head and don't show a damn thing about it.
What would we have to do, in order to be able to hear that BEAST run !?
Darn shame to tease a bunch of gearhead with this creation, and not let us hear it talk !!!
we don't get to hear it run?
Why would anyone put a car or engine on CZcams without starting it up
I’m sayin
Would have been nice to hear it run
no 5.0 go ?
So seeing it on the dyno not very likely ? Lol 😂 love old American race mechanical history ! Thanks
Naturally aspirated
How you gonna do all that and not have a video of it running? Want to hear it
Would've been nice to actually have a much better look into those heads.
Best regards from Brazil. One more subscriber.
I have 4 of those pistons
I wish you had shown some cylinder head internal pictures
We need a dyno reading damn it🙈.
It was really cool but I wanted to hear it
Great video but I really wanted to hear it run.
Awesome
Wait no video of it running? No Dino runs!! Oh man. I was really hoping to hear it
WTH? didnt even get to hear it run
What? All that and no sound clip of it running?
I want to hear the engine