How To Connect Pvc Pipes Of The Same Size? The Plumber Won't Tell You
Vložit
- čas přidán 13. 11. 2022
- Pvc pipes of the same size have many ways to connect them together. In this video, I'll show you a very nice splicing that the craftsman won't show you.
#tips
#tricks
#pvcpipes
#AlexTips - Věda a technologie
Think good for bigger than 2 inch pipes and you are in an emergency, and cannot wait for coupling.
that's right, buddy. it's true for certain cases, it's the case you're referring to. but filming here I can only simulate with a small tube
But pressure loss will be very high which will cause damage
This joint is not right may be joint will be very strong but other part may damage due to high pressure loss in one side
No, the interior edge may cause waste accumulation by considering long of time, it may obstruct the flow.
thank you for comment
i'm agree with you
and leak
Considering the waste accumulation, it'd better set the source pipe insert into the drain pipe.
Exactly.
This method reduces internal diameter, instead of putting small size pipe peace inside use bigger size pipe from outside to keep internal diameter same all the time, which is responsible for good water flow.
There's a difference between arts and crafts and plumbing.
You’ve put an obstruction into the pipe. A small restriction to the flow and a place where debris may hang up. If there is not alternative, fine-but an outside fitting seems more desirable.
This is a temporary solution when you have not yet bought specialized accessories
@@Alex-Tips That’s fine. However, that specifically is never mentioned in the “silent” video. One might therefore assume some folk watching such will assume the technique shown is a workaround without potential problems.
@@johnluiten3686 yes. thank you. maybe I still have a lot of problems to improve in the way the content is communicated. I will change gradually.
@@Alex-Tipsyou can still alter the title after you upload.
I'm no plumber, but I'm willing to bet this has to be a code violation introducing toxic glue material to the inside of a pipe waterline if this is for drinking water or hot water that can melt it loose over time and cause massive failure. That's why I think a sleeve fitting on the outside is the correct and desired approach, not this makeshift Temporary solution for lack of not having the proper materials for the job from the get go. I wouldn't try this. I'd just wait till I get the proper fitting to join them. Sorry, but this is a fail and should be an instructional on what not to ever do. 🙅🤦♂️
Thank you for sharing the trick
A much more durable connection can be obtained in the first method, which the author considered bad, it was enough to properly tear the pipe so that the length of the socket was the same as the diameter of the pipe, add glue or put a flat rubber gasket on the pipe with a smaller diameter.
In addition, these pipes look to me like pipes not for liquids, but for electrical installations, so if they were to be laid in the ground, the connection point should be wrapped with a special rubber tape.
Thank you for your opinion. You are a very technical person
I admire your ingenuity in developing this method, I wish you positivity. BUT as an electrician who regularly pulls cables through long runs of PVC conduits, these internal pieces would just get in the way and increase the likelihood of causing damage to the insulation and/or conductors. Not only that, but this would not satisfy Code.
Easy fitting use coupling.
Yes all rigt. . Frist step .
Great tip for connecting pipes. thank you
thanks my friend
I may use this technique to make a CB antenna mast out of 2 ..10 ft sections of 2 1/2 inch PVC schedule 40. I'll make the internal sleeve longer so that the second PVC pipe will have more of the sleeve inside it. Giving the top pipe more strength in the wind.
This idea is perfect
Thank you very much.. good bless you.. very help full to me as farmer.. this is crazy part to rejoint , before that I used torch burner.. very hard to fix when do alone..
very good connection tips
This looks good. But, considering the flow of liquid first one is better. The second one causes a slight obstruction to the flow..
My thought, too!
yes. the 2nd one it applies to certain cases
.
حوزظنظزننمممحخخ خوخ زن و زظظمحكجح ع هم
I think it is suitable for connecting the vent pipes
no!
Thank you!
Flow of water get reduced. External beauty is not concidered
If the water pressure is not too great and the cut between the two pipes is tight and combined with the glue, it will not be lost
@@Alex-TipsWhat type of glue is that? What's the brand name?
great connection trick
great pvc pipe connection ideas
do you think it's ok?
This method is useful only when all the stores are closed due to pandemic. Otherwise go for a traditional straight connection using a straight joint.
it applies to emergencies
Thank you very much
good connection idea
No don't do it this way! There's so many points that that can leak heating the pipe and sleeving it would be better. The best way would be to make or buy an external. You could use an internal sleeve but use a solid pipe.
When you don't have enough tools, this is a temporary solution
Agree with Richard. The heating is a lot better on joint integrity. it is easy, but this video fake it like a hard job. I never fail doing it.
This video method will easily leak on that opening internal sleeve, as it only has glue covering the gap.
I think this video misguides people.
Don't make excuse on temporary solution, you just didn't do it fair on heating the pipe.
Very solid trick. congratulations
thanks my friend
Thank you🎉
Not suitable for high pressure water sources, there is a risk of water leaking right at the cut, but it is also a good idea for constructing drainage pipes.
Wish you always success with your work
thank. good luck
Interesting !
شكرا من القلب
Ну да, вся грязь скапливаться будет.😏
it's also not that significant
Yes dirt will accumulate
This is a good idea for cosplay creators that want to transport their props in half . Good information
Les meilleurs recommandations YT...
Just created a flow restriction and possible clog point. Just get the right part for the job.
yes, i will find a way to fix the problem
Internal diameter of the pipe decreased hence fluid pressure may drops
Pressure does not drop, flow does. Pressure will actually increase with restriction. 👨🔧
This guy is a real pro I can tell by the way he used his fingers to apply the glue
When you work for a long time, the manipulations will become skillful
😂😂
I learn some new tricks today.
yes. let's accumulate for you
This may work if you don't need enough pressure. If this don't come off soon enough in boosted PSI from a water pump, the friction created will just reduce the desired PSI.
it will be very useful when work in night and the store is closed and need to finish the job immediately.. thanks for sharing
yes, thank you very much, and you can apply it to the ventilation duct
Thank you
very creative idea, worth a try when there is no burning media
thanks bro
Good job sir ✅❤
great diy idea
thanks my friend
thanks you very much
thanks
good technique
Good idea
good solution muje jo chahiye tha mil gaya... thank you.
आशा है यह आपके लिए उपयोगी होगा
Tuyệt vời mk cug tt ạ❤
Для канализации такое соединение не годится. Засор будет. Для канализации надо соединять снаружи.
с грязными дренажными системами не подойдет
@@Alex-Tips not suitable for anything, I don’t know where you are from but the pipe you’re using is not for potable water being to thin. The whole video is crap!
very good connection
yes
Thank you for sharing the trick with me
Super excellent
Thanks this video cured my hiv aids
Отлично! Сделал заужение и препятствие внутри трубы, увеличил риск негерметичности и протечки, зато снаружи как красиво! Видео о том, как нельзя делать!
Можно применять для вентиляционных каналов.
Cách 1 là cách chuẩn và hợp lý nhất.
Cách của tác giả hoàn toàn sai
for thoese who said it code flow problem that is right. but this can be good for diy project where you need pipe as poll or something for structure not liquid flow and you don't have tools for this kind of joints.
example i am planning on making a small football goals for kids out of some old pvc pipes that around
Thank you for sharing it. I will definitely use this tip
yes. Great tips to help you connect
Looks nice
thanks bro
Bravo 👏 coolo triko 👍
thanks
Good job 👌
thanks my friend
The joint will obstruct the water flow. It's the same method used on connecting an exhaust pipe on a cars or motorcycles
Very good 👍🙏
thanks my friend
Please show us how it works when you connect it to a water line! I think we all want to see it in action!
It will leak water at the joint due to the cut not perfect esp done freehand.
great tricks.
great ideas
Linda obstrucción le agregaste al caño!
Good Idea
great tips
Amazing kreatif 👍
thanks my friend
Sungguh simpel baru menyadarinya keren
thank you
All I'm gonna say is that if i was quoting plumbing work for a client and saw this, that quote just doubled
Appreciate the video
thanks my friend
Thank you very much.
thanks my friend
can you make a video of how you connect pipes but sideways?
The plumber won't tell you......cos it's wrong !!!!
it's not entirely wrong. it only applies to certain cases
totally ok and nice. I did it and it worked
thank you. is it good?
The exterior is nice to see but remember that u are using the inside part of the pipe that need to be clean nd free from obstruction!
Thank you for your Feedback
I agree with you, and usually I will connect the 2 pipes directly
I love the connections, I hope it will work perfect
yes. it works fine
You would be nuts to use this one anything that has any pressure on it. They make couplings for a reason.
Will use the awesome method to join conduit pipes
Save on buying the joints
Great idea.
Thanks
thanks my friend
happy new year buddy
it looks good outside, but it will decrease the flow inside, i prefer the first method. The first method was created to maintain the flow inside
Thank you for giving me feedback
"hey, do you know how to connect a pipe of the same size?"
The plumber: 🤐🤐🤐
great trick
can you tell me in which case this tip applies?
great tricks
thank you
what you do is awesome
thanks you
Hola yo prefiero la primera opción porque el interior del tubo no se reduce osea no se a chica . Lo que significa qué le va a costar taparse. 😊
Socket be like : mai kya job chhod du 🤣🤣🤣🤣
I will do it to check
yes. please test it and give me the result
The 1st way, you say no to is far superior way, for so many reasons.
yes, thank you very much
Give me the "I don't care if my living room floods" please!
very surprised. Good Idea
How surprised do you find it?
I took the tube out and started practicing right away
let's do it
Nice video ok
First method is best
How to connect two pipes of the same size
Use a coupling that's the same size as the pipe.
This created a sharp-edged lip and necking down the pipe diameter. Think snag point for food, T.P., turds, etc in a drain and turbulence that disrupts flow in a process pipe. Likely to leak. Use a coupling or street fitting.
Maybe this could work for a cheap vent....
yes. Thank you for your information
Thank you for sharing a wonderful way to treat PVC pipes. Have a nice day
thanks
This is definitely for playing for fun purpose only that is why plumbers never tell you this way.
it is applicable to non-pressurized pipeline
Such a great idea!
Do you have a similar approach for a T joint as well?
Thanks!
what you mean is to connect the 3 ends of the pipe to the letter T
@@Alex-Tips yes, exactly
Tested holding pressure (psi or bar)