I owned an old land rover defender 90 before i had my Navara, and i spent a lot of time welding it back together with 3mm plate getting burns. first thing i did when i got my navara was take it to a steam cleaner locally who does vans and lorries. Then i used Dinitrol treat inside the chassis rails and outside. Do it every couple of years. The steel isnt gonna last forever even if you keep on top of its but it will last a hell of a lot longer, im surprised people think that a truck with such an open chassis exposed to the elements in england is gonna be fine without treating it as a serviceable part. Also don't think that an MOT tester is gonna pick up internal corrosion because i've seen land rovers where people have put filler into chassis holes, painted them black and they've got through an MOT even when the holes are near seatbelt mounting points. Good video, wish i had one of those cameras just to have a look at mine, mines a 2005
solve 2 problems at once and redirect the crankcase vent into each chassis rail. no more blocked intakes and nice hot oil mist blowing through the chassis!!
Phil m. Ur is a fucking genius👍 like the way you think. Now all i need to do is stop my dpf requiring 15liters of diesel to regenerate itself each week.
I've done exactly that in my Nissan patrol here in Australia! I run my crankcase breather into my chassis and regularly swap sides , as I do a lot of saltwater mud driving and it works bloody great except I don't have any electrical sensors or egr shit on my 4.2 turbo diesel patrol she's all mechanical
I’m hoping to purchase a 2015 navara so I’ve been doing some research and this Chanel has been more helpful than u will even know and I’m so grateful your taking the time to help people like me out showing all the weak points and how to treat them so they last. Thank you sir 😄
BMX73THE2ND . Me as well. What's the go do they salt roads?? I have a 2004 D22 ZD30 in pretty much pristine condition. Wouldn't spend a cent on these new era shitheaps, Working daily on them gives you a heads up on what not to buy!!!!
Thanks for the video. Am picking up a 2015 Navara today - I couldn't see any issues with the chassis when I looked but I'm no expert so making some enquiries with local companies to get the chassis treated asap.
Any rail chassis vehicle I've had I always used to spray a mix of old engine oil and diesel in all the holes ...keeps rust at bay..better than anything else
Good day. Thanks for your videos, I own D40 Navara, so this is very useful for me... Recently discovered that my Navaras' chassis is in bad condition too. First of all went to my mechanic and will do the maintenence to keep chassis from snapping. My question is - where is possible to get rear plastic arches for Navara? Thank you very much.
here in ireland nissan are taking all navara jeeps off the road and giving market value on them or double the market value if you buy a new navara .thought you might be interested.
That’s where Nissan saves money. I had a 2001 Maxima that started rusting right above the rear tires as there was no protection from the water/rocks and sand blasting.
This is a problem that is going to haunt Nissan, especially as there are now a number of legal cases being pursued against then. My 2011 Pathfinder had 50K on the clock when I bought it, but the first thing I did was to have the chassis treated with Dinitrol rust treatment and then had the whole chassis Dinitrol'd inside and out... Alternatively you could get your chassis Waxoyl'd... Different products have different pros and cons.
I think the quality of paint on the chassys just simply something "water based" cheap, rubbish thing. We have a tyre fitter garage, (Hungary, Europe) and I always can see these Navaras have less paint on their chassys than Patrols from '90s. I love Nissan, I had 3.3 Td K160, I had Y61, I wanted to buy a Navara, but the France engine, sick diesel system and damaging chassys scared me.
my d22 -01 hade a crack in the frame at the same place. welded 1,5mm Steel around all frame from backwindow to the trailer hitch. that will never brake ;)
I have two things to say about this if I am paying Nissan or any other truck maker 20k for a new pickup truck should I not expect that the chassis would be painted with rust proofing inside before I get it or am I expecting to much for my 20k. I also tend to think a lot of the problem is down to boxed in chassis the old american pickups had channel chassis that you could wash the dirt off both sides boxed in chassis hold the mud in place and makes the chassis rust look on youtube at old american trucks and the frames on most of them are rust free.
It's a sad day for Nissan. I had a 1989 pickup and a 1995 4×4. Both went more than 250,000 miles with no problems other than wear and tear. So far so good with my 2011 sentra. I'll trade it off this summer for a Toyota before the jatco six falls out like all the others. Sucks cause they were good back then. Fiat made Chrysler suck, Renault is killing nissan much the same way. Damn shame. Go Toyota!
lmao good grief ,should be called "go back in time and fix your chazzzy with a can of rost off before its broken" . dont buy one with a chazzy , make sure you get a proper chassis one .
Thanks for the information, wish I had it before I got my Navara, it been to Nissan and come back with a good bill of health, on the chassis is it to late to treat it, lm new with 4x4,
Hi I have a 2013 NISSAN NAVARA D40 4WD manual transmission, was getting some problems off late with the clutch pedal very low and gears hard to put in today it was flat to the floor board only to observe on checking that the firewall supporting the pedal was cracked badly can you advise??
Intercooler leaking... Alternator shit itself.. Leaking windscreen seal in rear... Cracked leather in seats... Bluetooth ceasing to work... Satnav sent me to a middle of a farm saying it was a road while it was only watering access for the farm.... I was 6 months out of warranty and nissan did not want to cover anything... I said never again will I buy or recommend a Nissan
hi i have a problem on my nissan pathfinder 2.5 is overheating when towing i replace the water pump thermostat coolant and the fan clutch, i remove the top of the radiator and clean inside but still overheating in towing, in normal drive is ok i can drive 250km and no overheating, only in uphill or towing aditional not bubbles in the radiator or something With the head
Is it a problem in Canada as well? Mine is a 2006 and everything looks fine. Also can you do a video about the radiator coolant leak inside the transmission ? And is this frame considered a good frame, solid / robust ?
i brought 2005 D22 4wd last week, i checked the chassis and they are good at the moment except some soil stuck in the chassy. Is this a factory fault ? i have seen lots of D40s with the crack issue and does this issue exists in D22s as well. Mine is built in Japan, kindly advise. Thank you. I am from Sri Lanka
Hola, nissan Navara 2.5 174cv......no calefaccion. cambiado todo y limpiado circuito. solo falta cambiar selector de temperatura y verificar puertas de apertura. Agradeceria informacion del problema. Gracias.
my turbo is GT2056V 14411EB320 am trying to find where i can buy it online but its only made in china my question is can i fit the turbo for number GT2056V 14411EB300?
My chassis snapped this morning waiting for the recall team to get back in contact its a 2008 with 139k on the clock any one else had this and what payouts have you been given?
Hi. I own a nissan navara 2008 D40 and i have problems with it. In the morning the engine starts very hard and it doesn't exceed 3000 rpm. Can u tell me the cause? Thank you.
Hi there, do you have any advice on caring for a 07 D40 3litre v6 80000 kms. Had it from new just had a coil failure so replaced one bank for NZ$700 as advised by dealer as they need to be all done at 10000 kms. Any comments please. By the way good info on your videos. Regards Keith, New Zealand.
Massive corrosion on my 2006 Pathfinder rear chassis. Outside of 12yr warranty - Nissan not interested! Nissan owners PLEASE listen to this video about safety. Get your vehicle sorted before it kills someone.
Honda cars had issues with rust in the 80's, they got it sorted in later models, Hyundai recall everything that goes wrong, Nissan sits on their hands and says "Stuff you" Get it sorted Nissan, you will be loosing customers and getting a bad rap
West yorkshire engine services thanks for the quick response I've not bought it been watching your videos I had an outlaw that had that was looking at a king cab. Trying to get one that's in good shape
I owned an old land rover defender 90 before i had my Navara, and i spent a lot of time welding it back together with 3mm plate getting burns. first thing i did when i got my navara was take it to a steam cleaner locally who does vans and lorries. Then i used Dinitrol treat inside the chassis rails and outside. Do it every couple of years. The steel isnt gonna last forever even if you keep on top of its but it will last a hell of a lot longer, im surprised people think that a truck with such an open chassis exposed to the elements in england is gonna be fine without treating it as a serviceable part. Also don't think that an MOT tester is gonna pick up internal corrosion because i've seen land rovers where people have put filler into chassis holes, painted them black and they've got through an MOT even when the holes are near seatbelt mounting points. Good video, wish i had one of those cameras just to have a look at mine, mines a 2005
Everything you say is spot on! Well done.
Many thanks, Des.
Hi Des . I've just bought a 2011 Navara Tekna 89000 miles . How concerned should i be regarding age .
Thanks
solve 2 problems at once and redirect the crankcase vent into each chassis rail. no more blocked intakes and nice hot oil mist blowing through the chassis!!
Phil m. Ur is a fucking genius👍 like the way you think. Now all i need to do is stop my dpf requiring 15liters of diesel to regenerate itself each week.
Michael Duggan Remove it! Problem solved
I've done exactly that in my Nissan patrol here in Australia! I run my crankcase breather into my chassis and regularly swap sides , as I do a lot of saltwater mud driving and it works bloody great except I don't have any electrical sensors or egr shit on my 4.2 turbo diesel patrol she's all mechanical
I’m hoping to purchase a 2015 navara so I’ve been doing some research and this Chanel has been more helpful than u will even know and I’m so grateful your taking the time to help people like me out showing all the weak points and how to treat them so they last. Thank you sir 😄
Thank you good luck all the very best
love living in australia where 30 year old 4wds have less rust than 5 year old 4wds in colder countries
BMX73THE2ND . Me as well. What's the go do they salt roads?? I have a 2004 D22 ZD30 in pretty much pristine condition. Wouldn't spend a cent on these new era shitheaps, Working daily on them gives you a heads up on what not to buy!!!!
you guys must have some overheating problems though? and sweaty armpits.
Thanks for the video. Am picking up a 2015 Navara today - I couldn't see any issues with the chassis when I looked but I'm no expert so making some enquiries with local companies to get the chassis treated asap.
Any rail chassis vehicle I've had I always used to spray a mix of old engine oil and diesel in all the holes ...keeps rust at bay..better than anything else
Good day. Thanks for your videos, I own D40 Navara, so this is very useful for me... Recently discovered that my Navaras' chassis is in bad condition too. First of all went to my mechanic and will do the maintenence to keep chassis from snapping.
My question is - where is possible to get rear plastic arches for Navara?
Thank you very much.
Was he an orchestra conductor in a previous life ? Hands going all over the place 😂
here in ireland nissan are taking all navara jeeps off the road and giving market value on them or double the market value if you buy a new navara .thought you might be interested.
That’s where Nissan saves money.
I had a 2001 Maxima that started rusting right above the rear tires as there was no protection from the water/rocks and sand blasting.
Shazzie, love it
This is a problem that is going to haunt Nissan, especially as there are now a number of legal cases being pursued against then. My 2011 Pathfinder had 50K on the clock when I bought it, but the first thing I did was to have the chassis treated with Dinitrol rust treatment and then had the whole chassis Dinitrol'd inside and out... Alternatively you could get your chassis Waxoyl'd... Different products have different pros and cons.
To a good extent this video applies to every pick up truck whatever the badge on the grille
Peter Bremner well said buddy
SNAP ON...Nice you have some money in that kit, it ain't cheap.
I think the quality of paint on the chassys just simply something "water based" cheap, rubbish thing. We have a tyre fitter garage, (Hungary, Europe) and I always can see these Navaras have less paint on their chassys than Patrols from '90s.
I love Nissan, I had 3.3 Td K160, I had Y61, I wanted to buy a Navara, but the France engine, sick diesel system and damaging chassys scared me.
Balázs Pethő that’s right. Thin paint is how Nissan saves money too.
Noticed it big time with a current Juke vs. my old Civic.
my d22 -01 hade a crack in the frame at the same place. welded 1,5mm Steel around all frame from backwindow to the trailer hitch. that will never brake ;)
Hurd of a chassis, never hurd of a shazzy.
Plus this is a Nissan recall.
whats a hurd? Heard perhaps?
I have two things to say about this if I am paying Nissan or any other truck maker 20k for a new pickup truck should I not expect that the chassis would be painted with rust proofing inside before I get it or am I expecting to much for my 20k.
I also tend to think a lot of the problem is down to boxed in chassis the old american pickups had channel chassis that you could wash the dirt off both sides boxed in chassis hold the mud in place and makes the chassis rust look on youtube at old american trucks and the frames on most of them are rust free.
It's a sad day for Nissan. I had a 1989 pickup and a 1995 4×4. Both went more than 250,000 miles with no problems other than wear and tear. So far so good with my 2011 sentra. I'll trade it off this summer for a Toyota before the jatco six falls out like all the others. Sucks cause they were good back then. Fiat made Chrysler suck, Renault is killing nissan much the same way. Damn shame. Go Toyota!
Is it certains years of the d40 or is it right from 2006 to 2016..?
Have a good 1, Merry Christmas keep up the good work. very helpful.
Fluid film is good rust protection for used cars
What's a Chazzy?
Sam Trowsdale hahahahahahahhahaha
Hahaha. Chazzy is jazzy
lmao good grief ,should be called "go back in time and fix your chazzzy with a can of rost off before its broken" . dont buy one with a chazzy , make sure you get a proper chassis one .
Thanks for the information, wish I had it before I got my Navara, it been to Nissan and come back with a good bill of health, on the chassis is it to late to treat it, lm new with 4x4,
snapped shassy ... from yorkshire and it would sound better if you said chassis or chassy would sound more profesional
shazzy?
Hi I have a 2013 NISSAN NAVARA D40 4WD manual transmission, was getting some problems off late with the clutch pedal very low and gears hard to put in today it was flat to the floor board only to observe on checking that the firewall supporting the pedal was cracked badly can you advise??
Starting to think the d40 is a total lemon!
Intercooler leaking... Alternator shit itself.. Leaking windscreen seal in rear... Cracked leather in seats... Bluetooth ceasing to work... Satnav sent me to a middle of a farm saying it was a road while it was only watering access for the farm.... I was 6 months out of warranty and nissan did not want to cover anything... I said never again will I buy or recommend a Nissan
hi i have a problem on my nissan pathfinder 2.5 is overheating when towing i replace the water pump thermostat coolant and the fan clutch, i remove the top of the radiator and clean inside but still overheating in towing, in normal drive is ok i can drive 250km and no overheating, only in uphill or towing aditional not bubbles in the radiator or something With the head
Is it a problem in Canada as well? Mine is a 2006 and everything looks fine. Also can you do a video about the radiator coolant leak inside the transmission ? And is this frame considered a good frame, solid / robust ?
i brought 2005 D22 4wd last week, i checked the chassis and they are good at the moment except some soil stuck in the chassy. Is this a factory fault ? i have seen lots of D40s with the crack issue and does this issue exists in D22s as well. Mine is built in Japan, kindly advise. Thank you. I am from Sri Lanka
Hola, nissan Navara 2.5 174cv......no calefaccion. cambiado todo y limpiado circuito. solo falta cambiar selector de temperatura y verificar puertas de apertura.
Agradeceria informacion del problema.
Gracias.
Cambiar la cabeza del cilindro agrietada
Muchas gracias Des
I bet the disco in the background is one of the mechanics cars
my turbo is GT2056V 14411EB320 am trying to find where i can buy it online but its only made in china
my question is can i fit the turbo for number GT2056V 14411EB300?
My chassis snapped this morning waiting for the recall team to get back in contact its a 2008 with 139k on the clock any one else had this and what payouts have you been given?
Michael Pearmain we have done lots of videos on this buddy
THinking about getting a 2013 Navara. Is this a problem with all Navaras or just the older ones (2010 and older)?
Hi. I own a nissan navara 2008 D40 and i have problems with it. In the morning the engine starts very hard and it doesn't exceed 3000 rpm. Can u tell me the cause? Thank you.
Hi unplug the cam sensor next time to see if it starts better, if not change the diesel filter if no better get back in touch.
I have changed the cam sensor and the diesel filter and still does not work. Can be another cause?
Please unplug the cam sensor then try starting her.
I unplug the cam sensor and it still does not exceed 3000rpm
Did it start better though?
How about a set of mudflaps from new 2012 D40 chassis like new, honest
Hi there, do you have any advice on caring for a 07 D40 3litre v6 80000 kms. Had it from new just had a coil failure so replaced one bank for NZ$700 as advised by dealer as they need to be all done at 10000 kms. Any comments please. By the way good info on your videos. Regards Keith, New Zealand.
Does the NP300 also have a shassy or have Nissan swapped it for a chassis now?
Massive corrosion on my 2006 Pathfinder rear chassis. Outside of 12yr warranty - Nissan not interested! Nissan owners PLEASE listen to this video about safety. Get your vehicle sorted before it kills someone.
Tnx sir for all info, but can you answer me on a question?? What year off making are worst???
Bunker troll 81 most motors have problems it’s just finding them out before you buy one
West yorkshire engine services Ooppss, Hehe no sir talking about SNAPPED CHASSIS , have Nissan done something too prevent it too rust??
Bunker troll 81 sorry not really we are seeing problems with the np300
West yorkshire engine services Ok . Holy shit , thats bad,olso on the new one 😤😤
Shazzy.. It wasn't me
Ah lad. Stop staying shazzy,
Main frame of your 4x4
The best solution, don't bloody buy one, these are a good looking motor, but their problems put them on the, one to avoid list.
Are wurth paying you? 85% phosphoric acid will do the same thing x10 cheap also
please could you tell me if it's possible to replace the chassis with a galvanised chassis and an idea of the cost.Thanks
Can you not repair your's
West yorkshire engine services if a chassis is knackered, I'd want a new galv one - is it viable?
STOP CALLING IT A SHAZZY!!!!!!
thomas tolster Hahaha it’s the Yorkshire in me buddy
Chazzy?
Ionstorm well said it’s the yorkshire in me 😁
I own a Nissan navara 2008 , and I have a problem with speedometer it doesn't work , I was wondering if u could help me please.
Speed sensor in the gearbox of faulty clocks.
Honda cars had issues with rust in the 80's, they got it sorted in later models, Hyundai recall everything that goes wrong, Nissan sits on their hands and says "Stuff you" Get it sorted Nissan, you will be loosing customers and getting a bad rap
To prevent rot in a Nissan navara leave it a dealership # awful truck
i have a 2011 nissan navara not getting acceration
What is a chazzy I thought it was a chassis
What's a shazzy?
Are the Nissan king cabs effected with this problem
Sorry to say but yes they are you need to check it asap, Sorry to say though.
Many thanks Des.
West yorkshire engine services thanks for the quick response I've not bought it been watching your videos I had an outlaw that had that was looking at a king cab. Trying to get one that's in good shape
2.58 you almost seem to delight in attacking someones pride and joy to give it the "fail"
Whats a Chazzy 😅😅
The bloody things look a Salt and water trap, it is such bad engineering practice by Nissan.
Shazzyy
Just buy a different truck without the problem chazzy
cus these bags of shit are built in the UK....my 20yr ls430 with 200k has barely got a spec of rust anywhere.
Nissan are buying them back
Whoaaa....that's a big problem! Yeah, my pathy is rusty underneath!
Deal with it ASAP!
I just made an appointment next Saturday to have my underbody coated with NH Oil undercoating. It's an annual rest preventive treatment
Well done i am glad we can keep you updated with what we see every from hard working people.
Talking out your arse,wrong mix of steel when smelted. It will always be brittle. Why do you think they are all being recalled.
Thanks for your input
i was about to buy one, now im not.
Can you stop calling is a fucking shazzy
Had to turn it off can’t be doing with the way he says chassis!!.. it’s not SHAZAAY!
What's a chazzy ?