How to Replace Front Wheel Hub Bearing 1999-07 Chevy Silverado
Vložit
- čas přidán 29. 08. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ia/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: • Chevy Silverado 1999-2...
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar 1aau.to/omD/1AX...
• 18mm Socket 1aau.to/otf/1AX...
• 36mm Socket 1aau.to/oY/1AAS...
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/ow/1AXA...
• Trim Tool Set 1aau.to/opS/1AX...
• Ratchet 1aau.to/oTC/1AX...
• Torque Wrench 1aau.to/ozM/1AX...
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/of8/1AX...
• Liquid Thread Locker
• Safety Glasses 1aau.to/oes/1AX...
• Center Punch 1aau.to/ocU/1AX...
• Floor Jack 1aau.to/ooU/1AX...
• Hammer 1aau.to/onF/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oeI/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Lol.... this was an excellent tutorial. Thank you for helping me realize that, no, I can't just pop the wheel off and change the hub assembly. Here I thought I could do it in 30 minutes or so.
Whyd you take the tie rod end out... that was unnecessary
You can tell by the big boot on the CV joint going through the CENTER of the hub that this is the four wheel drive variety.
Best detailed instructional video I've seen! Thank you for an excellent tutorial
Excellent video. Took notes. Will go to the auto parts store now. Great video sir!
That was the easiest 177’lbs I’ve ever seen Hulk.
Thank you for the great video, going to try this myself.
I would recommed taking out the axle to make more room . Its easy to take off .
How were you able to torque the top bolt on the hub assembly?
Great video
Just tried changing one today on a 2000 Silverado and the hub pulled out without the assembly. Any advice on how to remove the rest of it? It's pretty seized in there
+Samuel Hall We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
Are these videos for the 2500hd or only the smaller 1500, mine is an 8 lug
+@IEatMyCatch This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
I don’t understand where do y’all get 177 ft-lb. I purchased the Manual for 1999 5.3 2wd, it says 133 ft-lb.
4wd not 2wd