Why Are Electricians Arrogant?
Vložit
- čas přidán 25. 08. 2019
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar - Zábava
It’s unbelievable how he calls electricians arrogant and then proceeds to butcher some electrical work.
Makes you cringe doesn't it.
Then why did you watch the video?.
Irony is great!
To tell you the true we had an electrician at work and he was arrogant as hell, I'm a computer tech and by New Jersey law now we need to have a certified electrician to run internet cable... nice check our democrat politicians received from the the electricians union for sure.
@Quayd Korman From the IBEW website, under the "Politcal Spending" Tab:
www.unionfacts.com/union/International_Brotherhood_of_Electrical_Workers#political-tab
Donations to Democrats
$29,583,815 (96%)
Donations to Republicans
$968,170 (3%)
527 Spending
A union's 527 committee makes contributions to political candidates and other organizations for the purpose of influencing the outcome of an election. Unlike Political Action Committees, which are strictly regulated by the Federal Election Commission, 527s are regulated by the IRS. These committees are often considered a form of "soft money."
Total 527 Expenditures
$51,576,329
Federal Lobbying
Total Spent Lobbying
$17,311,850
Of course, the IBEW expects nothing in return, like laws requiring licensed electricians to run internet cable. Note that they give very little to Republicans. Maybe because their votes aren't for sale!
As a union electrician, that was very hard to watch I want to fix all of it for him
What local?
IBEW Local 3 since 1985 here.
“12-3, 12 being the size of the wire and 3 being the 3 wires” It’s 12-2 man 12-3 has the red power too.- 15 y/o electrician
😆😆😆, love this
I didn't know electricians could be 15 years old 🤣👌 I'm not taking advise from a 15 year electrician
..
@@jasrenfro9856 ok lmao
@@jasrenfro9856 I’m a journeyman electrician and he’s not wrong the dude in the video is a major hack I would not take notes on his electrical skills he violates several codes throughout the video
@@jasrenfro9856 I laughed
Licensed Master Electrician here. Hope you never have someone learn from your video and then someone dies because you do not follow the code, which is LAW.
Ditto, Master Electrician and Service Technician (40 yrs) here as well. We could make a code seminar out of this video. Was painful to watch. He better hope no inspectors were watching.
You realize NEC is not law everywhere right? It's just a reference guide book until jurisdictions actually adopt it, which not all do.
We have a saying in
Chicago , " Amateurs teach amateurs how to be amateurs" one more for effect ,
If a job is hard give me a min., If it's imposible,
give me two".
"Electricity is simple"
Has neutral bonded to ground in sub panel.
Oh and after you fix that.
You're not supposed to use a receptacle to jump a neutral.
Ground the damn box.
Dont sleeve romex into conduit.
And for the love of God it's called twelve two with ground.
How's that for primadonna?
@prevail223 Not really but it's more expensive than using wire off a reel.
@prevail223I believe you need to derate it, or at least calc. the load if you do. The jacket bunches the wires together, so... according to code it's not the same thing as 3 separate conductors and ground.
Tyler this guy has fanboys who hang on his every word,in reality he knows nothing about the subject. With him it's his way or it's wrong. Primadonna sums him up nicely.
Electricity isn’t that hard, people made it hard than it needed to be.
@Mario the little tabs on receptacles that bond the screws together aren't rated to carry what the wire should. You can't depend on it to keep the neutral path continuous
An arrogant electrician wouldn't have ran nmsc in emt and would have definitely grounded the boxes.
Coming from an arrogant electrician, I definitely agree.😂 If you think it's expensive hiring a electrician, try hiring a inexperienced one.
Oof
Right! If he knew anything he would've wire nutted pig tails and bonded boxes. Also, why didn't he buy a ground bus/lug for the sub? Neutral and ground are only supposed to be bonded at the first POS. Needs to get off his high horse talking about "it feels so good to do something right" lmao
Yes, NM cable can be in conduit and should be protected when exposed requiring protection from physical damage. So here we go again, the ignorant calling others arrogant. And no, those boxes do not always need to be grounded as there is an uninsulated independent ground and metallic yokes, but they still should in at least one spot in my opinion. I have found a good electrician to be a dime a dozen. And with as exclusive as that trade is, folks ought to be careful to call them out when doing a shitty job.
Other violations, sure call him out on them. But before you start commenting, make sure what little you have to say is right or you are part of the problem.
ARTICLE 334 Nonmetallic-Sheathed Cable: Types NM, NMC, and NMS
II. Installation
334.15 Exposed Work. In exposed work, except as provided in 300.11(A), cable shall be installed as specified in 334.15(A) through (C).
(B) Protection from Physical Damage. Cable shall be protected from physical damage where necessary by rigid metal conduit, intermediate metal conduit, electrical metallic tubing, Schedule 80 PVC conduit, Type RTRC marked with the suffix -XW, or other approved means. Where passing through a floor, the cable shall be enclosed in rigid metal conduit, intermediate metal conduit, electrical metallic tubing, Schedule 80 PVC conduit, Type RTRC marked with the suffix -XW, or other approved means extending at least 150 mm (6 in.) above the floor. [ROP 7-94] Type NMC cable installed in shallow chases or grooves in masonry, concrete, or adobe shall be protected in accordance with the requirements in 300.4(F) and covered with plaster, adobe, or similar finish.
250.146 (A) Surface Mounted Box. Where the box is mounted on the surface, direct metal to metal contact between the device yoke and the box or a contact yoke or a self grounding receptacle shall be permitted to ground the receptacle to the box.
As soon as he pointed to the roll of 12/2 and said "12/3" I knew I was in for a treat
You absolutely have to separate the grounds from the neutrals in a sub fed panel. You just made your grounds current carrying wires.
This video is the reason why you SHOULD hire an electrician.
@Doctor Mudd Also ground and neutral in the same buss bar in a subpanel, the irony.
@@chancho00 and double tapped
As soon as he pulled out the romex, i knew this was gonna be bad.
I think every electrician had a little chuckle around the 14:00 mark when he talked about the pleasure of doing something right or fixing something someone else messed up lol.
Baaaahhhaaaaa, so true
FWIW: I done a lot of my one electrical work and it passes inspection. I would have an electrician do it, but here it takes 6 months or more to schedule with an electrician due to many construction projects and too few local electricians.
@@guytech7310 an inspector can't catch all of your fuckups, dude. The NEC is a minimum standard, not guidelines for a good installation
@@frenchmontana961 Everything I do is commerical grade: MC & EMT (Yes with offsets). Before I start I check the Code and also research to figure out the best way to do it.
@@guytech7310 Yep, its not rocket science.
I may just be an apprentice electrician, but this video gives me an urge to drive over there and get it done correctly.
Amen to that
That's what he's counting on!
For real! I'm dying to correct his issues!
Same!
Ikr
"why are electricians arrogant?" Five years in school, and thousands of hours on the job so people like you can complain about us while creating a fire hazard on video... that's why.
Five years in school? What are you a doctor? Dont help this twit out by being arrogant. You are just an electrician.
Yes we/I do/did spend 5 years in school that is not any sort of exaggeration. We don't just learn how to hang up ceiling fans in your house, we also learn how to build nuclear power houses, hospitals, and giant factories that make all the things you and I enjoy every day.
@@JohnColombo RELY???
5 years of school and then 5 years of apprenticeship before you are an electrician??
No you didnt. Please post what country you are from and the requirements of an electricians apprenticeship program.
Ontario Canada
Electrician - Construction and Maintenance is 9000 hours (approximately five years) consisting of 8160 hours of on-the-job work experience and 840 hours of in-school training
USA with some variances between different states
Register as an electrician apprentice or trainee
Complete at least 720 hours of relevant classroom instruction through a state-approved school (can be part of an apprenticeship)
Acquire at least 8,000 hours of supervised on-the-job experience from a certified electrician (can be part of an apprenticeship)
Pass the state certification exam
YOU WERE SAYING???
People never realize the cost of running a business and liability costs.
@Quayd Korman to be clear. There is not 5 years of school and an apprenticeship. There is, in Canada, 840 hours of school WHILE you are an apprentice or 720 hours of school in the US. In the USA you are only required 8000 hours of apprenticeship. Canada 9000 hours. Texas is out there on it's own with 12000 hours.
There is not a requirement of 5 years of school. Suggesting to people that there, is lying to them. Is the USA you are REQUIRED to do 18 full time weeks worth of in classroom education to become an electrician. Those 18 weeks are spread out over 5 years of apprenticeship.
An electrician is just a trade like all the others. All the trades are required to do in classroom work and maintain their knowledge base throughout their careers.
Reminds me of my Dad's favorite saying when confronted with something as janky as this: "What plumber wired this?"
@james scott lol what?
LOL, good comment man, i'll have to remember that one, 👍🇺🇸.
I’m definitely gonna use this one 😂
I say what HVAC ran this? Stick to your motor control and comm circuits.
🤣
As an electrician, this guy is killing me... And probably anyone that touches his work
I came down to say the same thing he honestly didnt know the name was strippers🤦
@@kodiak_snuff_king2142 the "shielding or whatever its called." must be a non union residential guy.
Waddya mean? Did you see the way he polished up that pig's ear, er, panel?
@@ascension6699 Or just a union guy?
@@awickedtribe he's never done industrial, so not a union guy.
To all my fellow electricians out there
How many code violations did you spot
I hate when people that dont know what there doing try to teach others
Over 10 😂
Marty Vener I cringed when he stripped the romex. Jammed that utility knife in there so far he totally damaged the insulation on the wire. Seen it done many times by people that don’t even notice.
5 by my count
I did count 5 but I lost count after and didn't want to rewatch it lol
Love the bonded neutral and ground bus in the sub panel...
4 years in shool, 10 year as working full time electrician, last year with my own firm.
this man is very dangerous, to himself and to others, all i have to say
I'm not arrogant. And I make a mess while working so I can focus solely on what I'm doing. I always clean up afterwards and during if possible.
worked for a guy whose motto was "we clean up the jobsite once per phase. either before we start or after we finish."
Gotta love when the firefighter builds a fire hazard, then calls electricians arrogant....
It is a fairly standard practice, when the origin of a fire can't be exactly determined, to place the blame on "Faulty electrical wiring".
@@Urbicide yeeeeah.... that hasn't been true for years.
😂👍
They are, 20amps is just fine if the wire gauge is adequate. Standard home wiring can go up to 25 amps before a fire hazard is present. 15 amps is standard as most items in the home don't need much more than that and gives enough wiggle room for shitty builders who used poor wiring or old wiring. A new house can support 20amps all throughout just fine.
Most kitchen appliances that aren't 220 use 20 amps and most of the time if you convert an outlet on an old house to support a microwave you would just put in a 20 amp breaker and be fine. It's code in most areas as well.
stop fear mongering.
I would have to dale disagree with u and go with what the guy with the long passage said
If you don’t want to hire a licensed electrician, at least read up the importance of keeping your neutral and ground isolated from each other after your main panel.
This was the first major mistake I saw in his work. I kept waiting for him to bring it up as something NOT to do.
It’s an extra precaution. It’s really not a big deal. All ends up in the same place anyway.
@@StandAgainstTheGlobalists if you’ve seen the charred remains of a ground wire that tried to carry the entire load of a sub panel after it lost a neutral, you’d think it’s a big deal.
I'm an electrician in Australia and the unlicensed work worries me so much. The unearthed metal conduit is a big no no.
That's 12-2 my friend. Romex through pipe. Neutral and ground bonded in sub. Boxes aren't bonded. There's a reason we're arrogant.
At least you hooked your outlets instead of using the stabs on the back I guess.
Yeah but he didnt pigtail his joints
He also didn't tape around his screws before Putting them in a metal box.
@ Urethra Papercut (omg), he even put those little curved thingies around the screw in the correct direction ..... I am impressed.......
You should do a follow up video fixing all the code violations and explain the safety reasons behind them.
Thank you
He isn’t qualified to install electrical work, much less able to explain it!! What a fool!! Yet electricians cost too much!!
That I would be interested in because then maybe I would learn something. The rambling comments have not taught me much.
@@brucehackney2217 but but but!..."electricity is simple stuff!"
I’m an apprentice but that is awful
How many disappointed electricians watched this?
too many.
Ill come down and fix it for 1500 easy.
I've reported him to the building department for not pulling a permit :-)
Watching this makes me feel like maybe all of his other videos are full of garbage that I don’t know about just because I’m not in that industry... maybe that’s why all the loggers are always freaking out!!!
@@edrader He's pretty much reported himself. I'm sure there are inspectors in his area that have seen his handy work.
The coupling with the 6 inch piece, that hurt my eyes 😐
I'm glad I'm not the only one who saw that
Then don’t watch....... wtf is the problem?? He’s obviously not a damn electrician and hell I don’t blame him
@@johnsalcido5436 youre right hes not an electrician. Hes a moron with no clue how the trade works
My journey men told me one day to get a foot long piece of pipe and not what my girl means😂😂it didn’t make sense but was funny but now it makes sense
@@owenharmon2919 sloppy work
This video made my head hurt and the fact that you were a superintendent screams nepotism because you surely aren’t electrically inclined how could you run an entire job not knowing if they did their job right
Dude you didn't run THHN nor did you ground your boxes! This izs why they don't let General Contractors Superintendents touch Electrical.
Next video, he does brain surgery, those doctors are very very arrogant.
@Mario The box itself needs to be grounded, attached to the ground wire via a green bonding screw. Over time emt set screws loosen and can open the "grounded" path creating a dangerous situation.
The emt is grounding the box and if you put lock rings on the correct way the do not come loose.
@@alexdownard1948 Beg to differ. As temperature changes metal shrinks and contacts making the set screws lose over the years. A separate grounding wire is the best way to go.
Ok bud
I'm not an electrician nor am I a rocket surgeon. But shouldn't those metal boxes be bonded with the ground wire?
No. The panel should be grounded though.
Like I said I'm not an electrician, I probably would have bonded it with the ground wire anyway. But then again I'm the guy that grounded his propane water heater
Pretty sure the main is bonded and grounded any sub panel will not be bonded. All metal boxes should be grounded.
@@mdvener my water heater actually doesn't have electricity running to it. When I first got the place,, the water was hot in more ways than one. They had a water line running through the vertical knock outs in the breaker box. I re plumbed, and rewired the house. The house was something scary movies were made of.
if he would have grounded the boxes, the return through the neutral back to source is also returning through the bare ground and if he grounded the boxes, it is now live with return power isnt it ? LOL get a hold of that with sweaty hands and hang on for the ride !!
Thank you for creating fire hazards and leading others to do the same Mr. Know-it-all. Our code book is written by the National Fire Protection Agency for a reason. Not one of your better videos here.
Can you point out the fire hazards?
@@walnutcove8583he didnt seperate the grounds from the neutral in the sub fed panel
@@stew-03 not a fire hazard. Potential shock hazard, but not fire hazard.
"Superintendent." Aren't they the arrogant ones? Think they know how to do other people's jobs just because they think by watching so many professionals work that they can do it themselves?
Cody, I love your videos but you should leave electrical work to an electrician. There are quite a few mistakes in your work here
What were the mistakes, for this non electrician?
How about offering some pointers instead of pointing out the mistakes and making the you should hire an electrician comment.
I'm not here to teach people how to do my job, nor am I the one putting a step by step video up of how to do something (incorrectly). Most of the mistakes I noticed were techniques he probably saw done when he was in the trades but are no longer up to code and for good reason. If you are looking for a how to video look for one made by an electrician. I've come to expect a little bit more than this from Cody, but if you really want a pointer Phill, hire an electrician.
Electrical is not a hobby hire a professional
Wow! dude, hire an electrician. You know enough to be dangerous.
Little knowledge is a dangerous thing
Classic line: “You get what you pay for.” Enough said. From a 3rd year apprentice...Amen.
Only some times...
Quality can be seen in the purchase of oats. If you want nice clean fresh outs you must pay a fair price. If you can be content with oats that have already been through the horse you can pay slightly less.
So much for grounding 😂. Love the 12/3 you used 😂😂 that panel looked the same from when you first got to it
Seems nice he can post a video and 50 electricians tell him every code violation before the inspector shows up :) Instead of paying for electrical work I should just post some youtube videos and get all the advice for free!
well if your gonna post an instructional video you should know what you are talking about first
If you think he actually pulled a permit for this job youre crazy. He mentions a permit but that final product would fail inspection for at least 6 different reasons.
@@Steven0sborne i wouldn't assume that. I pulled permits for a studs-up kitchen remodel, redid all the wiring. The inspector came for electrical sign off, wiggled one box, and said "You wired this yourself? And you are going to live here?" I agreed, and he said "OK" and signed off. This was in CA. Permits are mainly for increasing your tax basis on property, and generating revenue for the city so far as I could tell.
That is a form of Cunningham's law.
And this is why I build in a permit free zone bow I know there are laws ypur supposed to follow but they dont actualy have anyone on the books to inforce them
I’m a licensed electrician, and I’m not arrogant! We probably seem arrogant because people like you think you know enough to do electrical work yourself. If you would like, I could list each of your several NEC electrical code violations, and point out the short comings in your work in this video. Electricians spend as much time obtaining a journeyman’s license as a college student spends getting a degree, but people complain when they have to pay to have something done right..... thanks for your support 🙄...
Exactly! and thank you! I did a 6 year apprenticeship... 2 years residential, and 4 commercial and Industrial. I cringed watching this video, but even more at the arrogance cody showed in his blanket condemnation of most highly trained craftsman on any job! 42 years later and I was and am still learning! Again, Thank you! Rick
I'm not an electrician, but I would love to hear what is wrong with this setup? I think it is the same in my outbuilding that my dad built... Am I missing something?
@@carbonfusion Yes you are missing something, but as an electrician I'm not stupid enough to tell you how to do it and get sued when it goes wrong for you. If your so inclined several of the things he did wrong are listed in different comments.
Greetings from and English electrician. 3-4 year apprenticeship and the amount of people who think they know better because they have done it in their house and it's fine is incredible, with their "it hasn't burnt down" yet attitudes.
mr4x4s preach on brother
Yup. Another of those "electricians don't need to know anything. Anyone can do electrical work" videos.
Let me see you bend box offsets in that conduit.
I've worked for the local school district as an electrician for 15 years, even the licensed guys screw up. They cost a lot, even the bad ones for a reason. With that being said, it's possible Wranglestar might have had potential to be an apprentice candidate......not now!!! 30+ years in the trade and not "arrogant" .....confident. Keeping people and property is serious business. There is an NEC for a reason..... Guys and videos like this!
@@johnfrantz1086 but what he’s saying is your pipe coming out of the box is straight there is o offset. When you actually look at your pipe work it’s trash. It’s nice for pulling cause all straights 😂but looks terrible
didn’t even strap the emt to the wall lmaoo
I love when a layman says electricians are arrogant, he just cant comprehend what we're explaining.
Imagine calling other people arrogant while literally risking your life butchering their trade skills because you refuse to let someone else do the job.
Oh come on, where exactly is the danger? Is this code? No but is it actually likely to cause issues? Also no
Sam Hall code exists for a reason
As an electrician having an "attitude" can help save your life. Other people are always telling you what to do.I usually tune them out so I don't make a serious mistake.
You are an arrogant electrician. Listening to people who criticize your work may be what saves your life.
Customer - do you need to shut off our power today to wire that?
Electrician - yup, or I die
CZcams commenters - ARROGANT EleCtRiCiaNS
knurlgnar24 when people criticize a trade they know nothing about and try to tell you how to do your job which you go to school for and practice over thousands of hours it’s better not to listen because they know not what they are talking about electricity isn’t as simple and if you don’t have a general understanding of it it’s better to let someone who does and has the training for it do the job because it will be done professionally ,right, and safe
@@martinmeza6291 Absolutely incorrect. Dogma and political protection is a powerful combination in the trades that causes overconfidence among those ordained by the authorities to practice their craft without competition. I experience this in my line of work as well. People go to school for religious studies for thousands of hours too and think they are next to God, but yet they often know little of merit on the subject next to laypeople. If a studied person doesn't respect the perspectives of laypeople around them they have no business practicing their craft and do great harm to those in the craft who are the true masters of said craft.
If it weren’t for Beer, Electricians would rule the World...
Dude I don’t think so..... Sure electricians have become basically the more important trade to be in but it’s definitely not the most important industry or workforce type.
ELECTRICAL CODE BOOK 101:
I have been in the electrical industry since 1978. From taking coffee orders as an apprentice to laying out decks on midtown Manhattan hi-rises. I take offense to being classified as "arrogant" by anyone that has mastered nothing. I have always policed my work area as do most tradesman. I would respectfully request you pull down this video outlining the performance of an electrical installation without prefacing this video first with credentials, licensing and a waiver for safety. You may be a superintendent of a job-site........but it ends there. If you were just out to impress the youtube audience with your knowledge on an electrical install....you blew it. Stick with time sheets wranglestar.
Which shops have you been with in the 5 boroughs?
lmao that boomer @seditiouslibel is the literal definition of arrogant XD
All the electricians I ever worked with were very nice and helpful. They had no problem sharing information or discussing how electricity works or the proper work to wire.
I cringe whenever I see receptacles daisy chained that way.
agreed. I would not daisy chain outlets like this.
Daisy chaining will work as far as delivering power but its not something i would do.
Get some wire nuts use the right pig tail connections.
I'm curious as to why? Thanks
@@jellybean7253 Between the two screws on the side of the receptacle is a little stamped metal link. It is so you can separate the two outlets in case you wanted to switch one side with a lightswitch and the other stay hot. The link is stamped and bent so you can easily remove it. When you chain receptacles like Cody did that little metal link is now a "Current carrying conductor". Every bit of current for the downstream receptacle will now flow through those links. They are not rated as a "CCC" so it is against code to daisy chain like that. It could overheat due to high current flowing through it. If the neutral side link were to break it could create a situation where the black and white wires on all the downstream outlets would be Hot. That could lead to plugging in a tool and it's case being energized or other issues. The "what could happen by daisy chaining" is a rabbit hole that doesn't end well. The proper way to install a receptacle is a 6" black, white and grounding pigtail from each outlet bonded in the box to the incoming wire.
@@offroadtek00 You are mostly correct but I believe the scenario you describe would only occur on a network circuit....2 hots/1 neutral. If you loose the neutral you bet 240.
@@davidp8563 It will happen with any voltage. When the neutral wire is broken and there is a load plugged in, all the neutrals that are disconnected from the panel will have voltage on them.
An exercise you can do to see it in action is take a 12v automobile light bulb with 2 leads. Only connect the positive lead to the car battery and test the voltage between the negative lead and the battery post. 12v!
He installed Neutrals and grounds together at the sub panel and that’s the biggest code violation here
I think his electric work videos are my favorite. The comments section is the best on them.
My local inspector will not approve romex run in conduit. We have to use individual wires. Inspector said romex gets too hot in conduit.
It does indeed
Yes it does!
That's why he's not an electrician
Romex in conduit is only allowed to protect wire from elements and physical damage up to a max of 10 ft per nec 2017
@@xhacks519 what is your code reference that limits this to 10 feet?
As an electrician I almost had a stroke while watching this lol
Me as well..I subscribed then unsubscribe as soon as he started stereotyping.
I just realized the wasn’t the greatest once he said 12/2 was 12/3. THE GROUND DOESNT COUNT
You had a stroke from arrogance.
@@markcoleman8349 12/3 has four wires in it... basic, right?
RepublicOfCatyes 12/3 has 3 current carrying wires. A hot a neutral and a traveler. The ground is a wire and is in there but it isn’t included in the name associated with the cable. This man just called 12/2 12/3 which just gave me a brain aneurism
9:12. Electricity is simple…when you don’t know what the hell you’re doing
As an electrician there is a list of things I could comment on that are inncorrect. However, I will only say one, 12/3 is not what you were working with.
Who else noticed the cable jacket and wire insulation on the floor behind Cody at the end. Shame shame 😂
Haha, it's rubbing off on me,
🤣🤣 great observation skills
I was thinking the same. The irony of listening to the story and seeing that. Spec in the eye and all that though.
@@wranglerstar you are a pro now!
:)
I'm calling his homestead right now and telling him that if he expects his like & subscribe any time soon, he'd better send someone to clean up that mess!
The inner OCD electrician in me is going crazy lol, but hey it works.
I know the cringe is real
Why? It looked good to me...
benzmansl65amg
Offsets were not put into the conduits where it enters the boxes, the conduit should be touching the wall. None of the conduit is supported to the wall with conduit straps. The screws on the conduit connectors are facing the wrong direction. He should have used a wire-nut instead of that crimp, generally solid wire can’t be crimped. But like the other guy said it works, and it’s a lot better than some of the other journeyman’s work I’ve seen😂
Bare ground in the EMT is driving me nuts. I would him had rather left the sheath on.
Also no ground screws...
Bet your clients were shocked when they found out you werent an electrician
ALL I GOT TO SAY IS WOW DON'T DO IT LIKE THIS GUY
A $1,000 may seem like a lot to pay a qualified electrician, but a burnt down building is a few dollars more.
I am sure he pulling down at least $150K from CZcams.
If you charge a thousand to do what he did then you are a rip off. His DYI project is sufficient enough. It's not rocket science.
Could not agree more
@@stophate2023 Im a rip off.
Well, at least this work in the video cost like $200 to so be expensive if you charge $1000 for this job well you're a thief it's simply.
Love your lifestyle, BUT a good example of why we have Electricians.
Explain please. What is wrong with the work? Genuinely curious here ....
hahaha i love this comment XD
@@mattjames8683 wrong type of cable should be t90 or other applicable types, not sure what you are using the plugs for but 20amp circuits for plugs shouldn't have 6 outlets, grounds should be bonded to the boxes, conduit has no metal straps on them, neutral and ground buss's in the sub panel should be isolated until the main distribution panel. (metallic pipes often don't require running grounds through them they act as a ground themselves)
@@justinturnsvirtual And that is why your hire an electrician! Ha ha ha thanks for the info!
@@mattjames8683 hahah no worries knowledge is power ;)
Knock out, connectors, and the wire is 12 2, you dont count the ground wire.
I’m a 15 year Electrician, that romex inside conduit and making up the plugs with the hot first is some bulll 🗣💡
Man Cody, you opened up a can of worms with this video😂😂
Well I liked the video.
Its actually called a 12/2. You dont count the ground wire because it is not a current carrying conductor.
Atleast it is designed not to unless there's a problem. :P
actually the count is referencing insulated conductors ;)
12/3 would be size 12 wire and 3 current carrying conductors so there would be red white and black along with the ground, 12/2 is the cable ur using rn
I always had the suspicion he was stupid. Now I'm sure
Not an electrician, but I would say in many cases the answer is, “Don’t confuse a respect for the deadliness of electricity for arrogance.”
Electricity is no joke. Once you see a badly shocked/burned person (I have), or someone get electrocuted, you’d never let politeness get in the way of what you know to be true.
amen. seen to many mistakes cause injury
Some may people confuse my insistence on quality and safe work with arrogance.
However having witnessed 2 electrocutions first hand in my 24 years in the profession, and coming in behind people who didn't have enough knowledge to understand what they were doing, I occasionally get testy. I do insist my
guys keep a clean and orderly work area, but I've seen plenty who don't.
Electricity can be very dangerous and it's really quite sobering to watch the life being pulled out of somebody by an invisible energy force.
Did I mention it also hurts like hell the entire time it's killing you?
Amen. I'm testy right now!! Downright salty and sandy at the same time.
Your sub panel feeders are to be a minimum of 60 amp rating per 225.39 for outside branch circuits and you must have grounding electrode system for your building and bond your metal structure per 250.50,2550.52
Few things. Before that I used to be an electrical technician in Hungary, I live in the US for 14 years. It is a reason why I don’t do electrical work too often here. I would start with like with guns when you show 4 time they are empty I would turn off the breaker and lock it and disconnect and short the incoming cables wearing 2 gloves. Of course I put a shut off switch first so if I work on the box or something on fire I can turn it off faster without thinking. I would wire all boxes separately so if one brake it is not effecting the rest. Separate breakers optional. Write everything with flexible wiring connect them outside the receptacle so if one burns down it not spread. Use better quality receptacles too easier faster and more secure to connect to them. Of course I ground all box and the lid. And I would connect the 2 phase with a relay so in case of 1 dropping out it is not demanding the connected motor. Of course I would have indicator lights so I see it is on and I have all the phases working from a distance. Label what is what too. I think everything else is ok...
Just came across this video, I'm from the UK and our code of practice is to sleeve the cpc (circuit protective conductor) and to earth the back box is a must. We also test our work to verify compliance with regulation allowances. If you are going to post your work online for everyone to see and comment, make sure it's correct. I know I'm from a different country but by the looks of the other comments, I'm not alone on this one.
See even in the UK you are way off base. PLEASE STOP MAKING ELECTRICAL VIDEOS!!! I'm terrified to think your kids might be in the area of this fire and safety hazard.
I’ve seen tradesmen of every type not clean up .
Personally I do because my work reflects on me as a private contractor .
As far as arrogance , that is something that is often times confused with a non willingness to compromise .
I personally take your safety very seriously .
When I get “ can we just “ or “ can you do this to just get me by “. That answer is most often an unwavering no.
You don't take safety seriously, you take your pride seriously. Stop being so arrogant. Listening to criticism can only make you wiser as no one is right all of the time.
knurlgnar24 settle down .
Don't blame the trade, blame the individual. And for the record, I met lots of managers and supervisors that were arrogant and even clueless of what they're doing.
Good point 🤔
ok answered my question "cheapest and easiest way" thats pretty telling
Don’t do what this guy did.
Idea is there but do not use this guys video as a tutorial, its an unsafe install
- Licensed Electrician
And we always clean up after ourselves
We’re not plumbers 😂😜
im learning for journeyman electrician in serbia and ive never seen daisy chained so many plugins.. even metal casings for EVERYTHING... also do you folks not use RCD's for gnd/neutral control? because he obviously had connected gnd to neutral.. and that utility butchering through the
insulation of cables... omg.
Is it normal to connect neutral to ground in America?
In Europe we have a separate ground rail for ground.
It's connected to a metal rod embedded in the actual ground/earth/soil.
Neutral often floats around >10 volts instead of being dead zero.
Funny thing is, European connectors are symmetrical, meaning the neutral and phase can be swapped around by re-plugging, sometimes it causes phase and noise issues in older tube electronics.
Da Qoraxxx ground and neutrals are bonded in the main service disconnect, any sub panels or disconnects after that they must be separate. This is a pretty big violation in this video
@@spudatbattleaxe Why are those connected in the main panel?
@@spudatbattleaxe In serbia there is illegal practice applied in old housings called nulling - connecting neutral to gnd because old housings do not have propper gnd wires. and it prevents the use of rcd in main fuse panel... sad but true
you were a superintendent? lol, that's a scary thought...
Parking lot superintendent...
Oof, even as a diy guy I noticed some mistakes and nomenclature errors. I know this is a small project, but before I wired my unfinished basement, I had the gumption to read an up to date Black and Decker home wiring book. I know it's probably not perfect, but I felt it was well enough to be safe. It passed inspection easily enough anyhow. I only missed a couple nail plates.
No saddles on that conduit legit killed me, no earth sleeving also 😵
I’m not arrogant I just know a lot. The wire you had was 12/2 12 being the size of wire and 2 being the number of current carrying conductors the bare/grounds not counted
Got it, my bad,
@@cheeseburger9232 That's what I thought too, but would like to know if anyone can confirm since I am adding some conduit to my garage.
Could have placed some insulation behind the wall. If you are going to fix it might as well fix it well.
No you are not supposed to put romex in conduit.
@@cheeseburger9232 normally you dont if you run nomex just staple it to the wall. Had a few years running wire just trying to figure out why he didn't ground out to the box?
" I cant afford a profeesional" *drops $2500 on e bike
He got the e bikes for free though
@@justinscott3001 ohhhh
@@p8ntballer117 He still makes good money from You Tube .
@Gary Russ no gary, you would need to charge as to teach that getting a pro in in the first place is cheaper than getting a pro in to unfk his handy work,
@ Max Banono, That's the reason he can't afford a "professional"
Hey, I think you were implying that the wire in your hand was a 12-3, that's actually 12-2 wire.
Non-Electrician: does the job completely wrong.
Then: “doesn’t it feel good when it’s done right?”
Lololol!
Im only on week 4 in trade school and im amazed at how shitty of a job he did and how certain he is that he did the right thing.
John, I laughed at some of his rookie mistakes. Most people who think electricity is easy only know enough to be dangerous.
he's still waiting for that day........
As an English electrician I’d say what a bloody mess that was ,liked the comment about not needing many tools ,not a test meter in sight 😱 that’s why an electrician charges what he does as thousands of pounds worth of training and tools are needed to carry out the job expertly and safely
Unfknblvbl!! This guy is a danger to himself AND others!! DO NOT do what this guy says..... Superintendent of what??! Christ! I'd hate to see his jobs.........
Explain exactly what you expect to go wrong.
@Joe Crow Yes, we do, however not all things that exist outside of that book, which varies by local, is fire and danger and death itself.
Believe me, I deal with residential and commercial code daily. A lot of stuff doesn't meet code and nobody ever notices or cares. The rules are very general and sometimes they don't work or don't matter in certain contexts.
It's not a black and white affair
You should have this work inspected for insurance purposes, but be prepared for a redo!!
Wow great information ℹ️ I appreciate it. I’ve seen unlicensed electricians bypass safety. I enjoyed watching your video 👍 I’m curious how many amps is supplying your shop.🤩
Wow, you're calling electricians arrogant? Maybe you should look in the mirror once.
hello, great video, but let me give you a little conscructive critiscism:) first thing is that for this application you bought the wrong wire, this wire is for running in houses, ect, but for your purpose you should have gotton the individual wires in the spools, black, white, and ground. The reason being is that when running sheathed cable like this through conduit can get to hot, (sheathing of individual wire plus cable sheathing plus conduit) and can cause problems. you could still buy this cable but just strip the entire outer jacket and use individual wires. also the cable that you are using is 12/2 not 12/3, 12/3 wire would have a black, red, white, and ground wire, the number does not include the ground. also, the metal boxes need to be grounded, there is a special threaded hole in them just for it, buy a pack of small green "ground screws" and pigtail the ground wire and connect it to the box. also, tighten all conduit connections BEFORE you run or connect wires, much easier and after recepticles are in it is hard to tighten conduit locknut. other than that the conduit install looks nice, one tool you could buy is a conduit bender, save money on connections and you can do box offsets to make it look nicer. also you should have gone ahead and gotton gfci's as they are required by code and are much safer. hope this helps:)
btw, 12/2 is the romex you used. not 12/3. you dont include the ground.
I couldn't stop staring at that coupling so close to the box. I would've been chewed out for that.
GFCI over current required along with a grounded sub panel (ground rod) and tamper resistant devices. NM Cable is permitted to be in a raceway for stubs only BECAUSE OF THE INSULATION RATING. I stayed in a holiday and expressed last night.
It seems like it has been a long time since you have been around electricians. Back in the 90's when I broke in a lot of Electrical contractors wouldn't clean up their mess because the GC didn't want to pay them too. They wanted to cut bids down so they would take out clean up with the agreement that the GC would. I always cleaned up after myself or made it as easy as I could on the one that followed me. It's just the right thing to do. Now back to your work. You probably won't kill anyone with it. Well we all hope not anyway. But you are definitely going to make the next guy behind you shake his head and ask WTF? Pretty crappy for a guy talking smack about the trade he is trying to replace. Keep the great moments in building science coming LOL.
The next guy im sure will be pretty pissed off seeing a hot neutral wire and no grounding.
"12/3" ....pulls out 12/2
I like your videos. But this one is rough.
Everybody is an electrician, until we're called to fix all your mistakes. Cheaper to hire us the first go around and do it right from the start.
there's one word for this guy (HACK)
I retired from commercial electrical work 13 years ago. Cody, do yourself a favor, spend some money and buy a NEC code book and follow it. I do not agree with some of the codes in there but for the most part, they are sound and having a copy and reading might save a life some day, or at least a ton of money. You do neat work, but Romex in conduit is a no-no, Bond all metal boxes to ground and keep your grounds and neutral wires separate once you leave your main service.
I have wondered about running the Romex in the conduit. I simply thought he was wasting his money.
Please for the love of God no one use this guy as a tutorial. There was so much wrong info and Code violations.
I always wire to the minimum code requirements per each building installation residential or commercial
Please separate your ground and neutrals! only bond Neutral at the transformer (which will be done by your POCO). You may have problems with breakers not tripping with your subpanel set up like that. and that could be a very bad time!
Many of us are arrogant, but its usually the really arrogant ones who don't actually know anything. The ones of us that do are open to learning and owning up to our mistakes. and we clean up after ourselves as well. we go to school (either college, or a recognized apprenticeship) for many years to become a Journeyman. We take pride in our work. You are an intelligent man, and I have confidence that you would seek help if you needed it. This is a simple job, and with a little guidence (ground and neutral not bonded!) you can handle it. Most people can't. Even some electricians can't, such as with a buddy of mine and his uncle. My buddy buys a house, and it has an old fuse box and no ground in it. His uncle says "we can just run a ground wire from the plug and tie it to the neutral!" and I had to step in and tell my buddy to NOT bootleg the ground. Don't have to run all new wire, but to be compliant with code he'll need GFCI receptacles with the proper labelling to let people know there is no equipment ground.
but please, fix that neutral/ground problem! and please ground your boxes, and wrap a little tape around your receptacles to guard against shorts. :)
Bonding is done at the first disconnect which is usually your main panel but codes in many states now require a a disconnect before your main panel so bonding is done there now.
You have 12-2 wire, 2 conductors and a ground
It's your fire.
It isn't arrogance to us. We call it skilled professional. Hacks may confuse that with arrogance...
Everyone that isn't an electrician thinks electrical is easy...That is why we charge so much to fix your messes. Kings of the trades.
Posting electrical, plumbing, or welding is a sure-fire way to boost interaction in your videos.
with those type of receptacles you can just leave the wire straight and put in not around the screw because the screw actually screws a plate in on the inside to hold the wires. you dont want to do that with are the ones that just use a spring to hold the wire in. Also that's 12/2 wire. don't count the ground.
@Dewey Rayburn The receptacles he used were commercial grade receptacles with plates under the screws to allow for straight in termination. The pressure from the grooved plate combined with the pressure from the screw is far better than putting a hook under a screw head. The stab back receptacles used in residential work ARE junk. They rely on spring pressure to secure the conductor in the device. The devices Cody used were NOT stab back receptacles. He should have used the pressure plates instead of the hook.
"Don't mean to hurt any feelings " drops the hammer !!
When he said “when it feels good to do something right.” Lmfaoooooooooo