Do's and Don't of EFI | Tech Tuesdays | EP90
Vložit
- čas přidán 23. 10. 2023
- Today we are going to go over the do's and the don'ts when installing an EFI system. When it comes to installing your FiTech fuel injection system, there are some things you want to focus on. Here are some of do's and don'ts that are on our top priority list.
Tech Support Email: techmail@fitechefi.com
Tech Support Line: (951)340-2624
Have a question you want answered? Comment below and it might be our next Tech Tip! Check in every Tuesday for more tips and tricks from the FiTech experts!
For more Tech Tuesdays CLICK HERE: fitechefi.com/tech-center/
Visit: fitechefi.com/
Stay Connected and follow FiTech Fuel Injection:
Instagram: / fitech_efi
Facebook: / fitechefi
TikTok: / fitech_efi - Auta a dopravní prostředky
Installed my 600 HP PA and works great. Cold starts are easy and no hesitation under acceleration, I love it.
Basics. Who would have thought? 😁 1200 PA working flawlessly and efficiently. Love the product
Great information.
Followed the instructions on my FITECH system and it runs fine.
Thanks. Good information 👍
I believe my ECU just failed. I have had my car running for years with my FiTech unit. I was out for a drive, did a moderate acceleration through a yellow light. And immediately the engine and car changed to being barely able to run like it was starving for fuel. I had to feather it down the highway until my exit only going 50mph no shifting. Once I turned off the road it died out. We added fuel got it running barely, got it home, it killed the engine when put in park. We have cleaned the fuel filter, checked the resistive wire, and the keyed ignition white wire all have power. We had it running for a bit, turned off the ignition and noticed the fuel pump was still running. We turned off our fuel pump with an external kill switch. Checked later something had drained all the power from the battery until it was dead. Now the ECU will not respond to the hand held at all. We checked the power wires. The sensor and plug wires and all appear to have no damage. With this system, from what I remember it is supposed to control the electric fuel pump to vary power levels based on throttle. I am wondering if some kind of glitch may have occurred, and it cut fuel, and then it, kept power going to the fuel pump when it should have powered it off, and instead just shorted out the ECU internally.
Hello, please send this information to techmail@fitechefi.com and one of our techs will assist you.
Can you make a video for spark map on the ultimate ls system? Got mine set at 27 across the board(besides idle) want to tweak my cruising spark to increase my mpg but not sure what direction to go with it
I have one- do buy a carb, don’t call for help😂. JK i am just struggling to get this thing right. I am about to give up and go to carb though. One more thing to try first
To get the engine to crank, I need to turn the ignition key on and off twice.(spritz) especially when engine is cold. i increased the prime fuel mult and other items but still problem remains. after cranking all of things like IAC, rpm, tps and arf work good, my only problem is in cranking
My handheld is 2 dot, 30003
My engine is v6, 262 chevy stock.
Can you guid me please?
I am confused what happen
When is FiTech 2 going to be released? Has this system been update (other than software updates) since 2016?
😂
Aluminum fuel line rating is higher than he stated.
My workshop is trying to set up my FITEC3001 Go EFI14-600 HO kit but no matter what they try with the control unit the 7.2 litre, new Chrysler V8 continues to over fuel?????
Hello, please reach out to our tech support team techmail@fitechefi.com they will have some follow up questions they will need to ask to assist you with this.
Can i do a break in Engine and cam with the fi tech?
yes you can. Be sure there is a full exhaust behind the oxygen sensor.
My fitech doesn't make that injector sqwert sound anymore and won't start ??
Hey Gary, we have a Tech help line you can give us a call if you are having any issues with your unit. we would be happy to help!
Is duel feed good/ bad or doesn’t matter
a single inlet is acceptable on the throttle body EFI systems up to around 800 HP. Past this point we recommend dual inlets to allow for adequate fuel flow.
Leaded gas or lead substitute?
Leaded fuels will plug the oxygen sensor. Some octane boosters are also not oxygen sensor safe.
@@FiTechEFImedia Got ya, I have a 62 Impala and use a lead substitute so guess Ill have to buy something else.