how to replace mirror citroen relay fiat ducato or peugeot boxer van 2006 - 2013 easily in minuets

Sdílet
Vložit
  • čas přidán 30. 07. 2024
  • Thank you for watching my video on how to replace a main mirror on a citroen relay van, this is the same as a fiat ducato and peugeot boxer. there is 3 different sizes of mirrors as explained in video. PARTS LISTED BELOW
    Short arm left ebay.us/1GpoGf
    Short arm right ebay.us/GEy9fN
    Medium arm left ebay.us/q71DDe
    Medium arm right ebay.us/hY7uxs
    Long arm left ebay.us/nMiM4R
    Long arm right ebay.us/CwPpmR
    Please like and subscribe, also please follow me on Instagram or Facebook to keep up to date with what's going on on my channel @ Martys_workshop . If you would like to contribute to help grow this channel please feel free to purchase your very own Marty's Workshop T-shirt at
    www.martysworkshop.com/
    DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel.
  • Auta a dopravní prostředky

Komentáře • 34

  • @tokyo1469
    @tokyo1469 Před 2 lety +3

    Great video....just a simple suggestion for pulling the cable...create a draw wire......tie a thin rope around the old wing mirror cable connector plug before removal, pull the old wing mirror out with the thin rope attached & simply tie around the new mirror cable connector to create a draw string to pull the new cable back into the control switch area 👍

    • @Martysworkshop
      @Martysworkshop  Před 2 lety

      Very good suggestion. Thank you for your feedback

  • @paulchinn5368
    @paulchinn5368 Před 2 lety +1

    Great straight forward video and did mine in 45 min. The second cable is for the external temperature sensor. After fitting and testing the mirror was all working but I noticed the temperature display wasn't working on the dash. I have stripped the old cable from the broken mirror and connected and all is working fine, however I Brilliant Video Marty.

  • @diamondsy96
    @diamondsy96 Před 5 měsíci

    Thanks buddy done mine in 5 minutes with this great video the only difference is mine are T40 screws

  • @anthonyjobson
    @anthonyjobson Před 3 lety +2

    thanks for the clear description!

    • @Martysworkshop
      @Martysworkshop  Před 3 lety

      Im glad my video can help. Thank you for watching

  • @richiegreen100
    @richiegreen100 Před 3 lety

    Made simple…great help!

  • @soleillune9169
    @soleillune9169 Před 3 lety +1

    This was really easy to do except when it came to unplugging. In the video you skip past that and I am still trying to figure out how to pull the plug out. nothing is moving though. Enjoyed the video.

    • @Martysworkshop
      @Martysworkshop  Před 3 lety

      Thank you for watching, yeah the reason the video stopped was i had to jam my hand in to unplug it and couldn't film it, it is awkward but is doable

  • @Yahoomediaclub
    @Yahoomediaclub Před 2 lety +1

    Great well explained video ⭐️⭐️⭐️⭐️⭐️🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @theeclecticthursdaysession

    Thanks mate just the job!

  • @ph-neutral5181
    @ph-neutral5181 Před rokem +1

    Super, thanks 👍👍👍

  • @audreycatterson6741
    @audreycatterson6741 Před 2 lety +1

    Thanks great video. Managed to install our replacement mirror but having trouble putting the trim back on. Struggling to get it back onto the two plastic discs on the door. Any ideas?

    • @Martysworkshop
      @Martysworkshop  Před 2 lety

      The popper should be in 2 pieces, one clips in the door and one clips into the panel, it hasn't popped out panel end, If so try and separate them and clip it back in the panel,

  • @tommyq374
    @tommyq374 Před 2 lety +2

    Tape something to the cables when you take out the old mirror then tape the new cable to it and pull through from the other way, save all that fiddling around with the cable

  • @CORRIGEEN71
    @CORRIGEEN71 Před rokem

    Great vid tks

  • @woldsweather
    @woldsweather Před 2 lety +1

    My Peugeot Boxer mirrow blows in when above 40 mph. Is there a way to tighten it? Someone said the cover at the top comes off but I have cracked mine trying and still can't get it off.

    • @Martysworkshop
      @Martysworkshop  Před 2 lety

      Usually they put screws behind the mirror glass, so you would need to remove glass and remove screws.

  • @rad6666
    @rad6666 Před 2 lety +1

    Fantastic mate, thanks so much.

    • @Martysworkshop
      @Martysworkshop  Před 2 lety +1

      Thank you for your feedback, I'm glad i could help

  • @The-Lone-Racer-30
    @The-Lone-Racer-30 Před 2 lety +1

    you say t30 torx and then t40 torx which is it please

  • @greenreaper1985
    @greenreaper1985 Před 3 lety

    I bought an eBay mirror too. The heating part of it packed up after a few months and the mirror itself rattles like crazy on the motorway compared to the standard ones..... definitely don't scrimp on wing mirrors

    • @Martysworkshop
      @Martysworkshop  Před 3 lety

      Thank you for your feedback they do seem a little cheep to be honest, thank you for watching

  • @2Truth2you
    @2Truth2you Před 9 měsíci

    T40