There is a bleeder on top of the water pump. It’s above the drain bolt. You must crack that one loose as well if you want to completely purge the system.
The small line that goes to the overflow cap comes from the radiator the big tube running down the frame next to it is a drain for the pan under the fuel tank.
Nice! I should probably do this too.. Definitely using your video!
Glad it could help buddy!
Great video Joe! Maintenance maintenance maintenance!!!
There is a bleeder on top of the water pump. It’s above the drain bolt. You must crack that one loose as well if you want to completely purge the system.
Not if u do it this way no. Air rises to highest point.
Had my 06 700r engine running about 10 mins and the coolant reservoir expanded and burst. What should I do??
You could have a bad head gasket. Anytime you pushing pressure back into the overflow tank it's usually signs of a bad head gasket.
Did you add water to the coolant?
Thanks for the video.
I bought the premix so it's already 50/50 ready to use
The hose on top of the over tank; what does it connect too? I change my coolant and seen it hanging
The small line that goes to the overflow cap comes from the radiator the big tube running down the frame next to it is a drain for the pan under the fuel tank.
Is it normal for it to bubble up into the overflow tank after changing the coolant and first startup? This is with doing the bleeding.
Possible you left some air in the system or its over heating.
Do i have to use still water ? If i should can i mix the coolent ?
If you get the premixed you don't add any water. If you don't you need to use distilled water.
I stripped my Air bolt, any recommendations?
New bolt and tap the threads
🤘🏼🤘🏼🤘🏼
Bro i cant get that coolant draining bolt oit
Well thats no good. Try heat