Tillotson Carb Clean & Rebuild ( Stihl 08s Chainsaw , TS350 Cut off saw etc ) Mend It Man 🪛
Vložit
- čas přidán 28. 07. 2024
- Tillotson Carb Clean & Rebuild ( Stihl 08s Chainsaw , TS350 Cut off saw etc ) Mend It Man 🪛
Hi welcome to another Mend It Man video, in this video I show you how to clean and rebuild a Tillotson carburettor from a Stihl 08s chainsaw ( this Tillotson carb was also fitted to other Stihl models Ts350 & TS360 etc ) I start off with dismantling the Tillotson carb then give the carburettor a thorough clean, then I fit the carburettor back together using a new diaphragm and gasket kit. To find out how it is done please watch. Hope you enjoy the video. Thanks for watching 🙂👍
#Tillotson #Carb #Diaphragm
AMAZON WISHLIST- www.amazon.co.uk/hz/wishlist/...
Instagram link- / menditman76
Channel Email- menditman76@gmail.com
/ posts
My Other Channel Mowers and Stuff - / @menditman2014
Please Subscribe to my channel - I have lots of machines which means going forward I will never be short of content, lots of my videos are small engine related but I do have bigger vehicles to which I also like to work on and improve.
JUST TO NAME SOME-
2x Land Rover Defenders, Subaru Impreza WRX Turbo Wagon, VW T4 Transporter, Ford Transit Campervan.
5x Puch Maxi Mopeds, a Lambretta Scooter, a Yamaha MX100 motorcycle.
Also lots and lots of garden power equipment. All this will give me years and years of content, so with all that it makes my channel well worth Subscribing to 😀
A bit about me I grew up around engine’s as my dad was always a car mechanic and that’s how I learnt about them and liked working on engine’s. As the years have gone on my passion for working on engines has grown even more, unfortunately for me my dad slowed down working on cars when I was around 20 in the 90s, So the career I always thought I would have didn’t materialise and I become a gardener, but what do gardeners use? Power tools so that’s when I learnt all about power tools small engine, 80% of my work tools Mowers, Strimmers, Hedge Trimmers, Blowers were bought secondhand and most of them broken and I fixed them up. Most have been high end tools, Honda, Stihl, Kubota, Kawasaki, Husqvarna etc etc the list goes on I’ve worked on loads and usually managed to fix tools that were destined for the scrap heap. I have learnt so much and I pass a massive amount of that on in my videos, so watching my video could save you a small fortune in repair bills, so another great reason to subscribe to my channel.
Going forward I have plans to faze out my day job and work with the engine stuff much, much more that’s my dream, I also like restoring machines as well. So I’m always adding more and more tools to help me along the way. So the more support I have on CZcams means that my dream may come sooner than I think it will 🤞 I’ll do my bit with the video if you can do your bit to help it could be a great journey forward, thank you for watching my channel I massively appreciate it 🙂👍 - Zábava
Hi all if you would like to support my channel with a little gift here is my wish list link all help is greatly appreciated 👍, AMAZON WISHLIST- www.amazon.co.uk/hz/wishlist/ls/1FZA15M0JZ6ZO?ref_=wl_share
My Other Channel Mowers and Stuff - czcams.com/channels/qpqBkUfzve4gmSi9D838ng.html
hallo GRAZIE PER IL TUO VIDEO SULLA STHIL 08 S 👍
Thanks for the detailed step by step. Got the old carb on Dads 70s Stihl rebuilt
Took my carb apart about 2 months ago and by the time I recieved my rebuild kit I had forgot how to put it back together but your video set me on the right path. Thank you
Thanks just got a 08s so I needed this
No problem glad to be of some help, great saw you have there 😄👍
Excellent vid, thank you 5*
Thank you 🙂👍
great job luke
Thanks 🙂👍
good vid on you cleaning keep up the good vids
Thanks 🙂👍
Nice fix up if the carb Luke like to see what it come of
You will do video will be up soon 🙂👍
@@menditman2004 good man lol.
Good detailed video on this Tillotson carb Luke. Carb spray does a great job removing lacquer build up in the smaller ports.
Thanks Martin, I’ve always been a big fan of carb spray I buy it by the 12 pack, Imo can’t beat the stuff for cleaning carbs 🙂👍
Thank you Luke for the Tillotson tear down and build I have never seen that type carb im in the United States the carb looks very sturdy
They I a nice carb I like them, they run nice on the saw 🙂👍
@@menditman2004 Luke it looks like a huge carburetor I heard you say it was on a stihl chainsaw that joker must be a beast!
Nice clean rebuild on that old carb. Amazing the size difference from then to what’s on the modern saws. I bet this would run like a champ fitted up to the saw.
They do run well on the saws, video of that will be up soon 🙂👍
Nice rebuild. Only ever worked on one carb like that, they are big
Hi yes they are a big carb, I like working on these, probably my favourite carb 🙂👍
Looks fantastic now and should work well. Great vid
Saw needs a few parts when I get them I’ll be doing a video on the saw 🙂👍
Tim Palmer wants his hair back!!!
Well he can’t have it, I’m sensible enough not to have it cut off in winter 😂🙂👍
Good work. Are you going to show it refitted and running?
Hi yes the Chainsaw it’s comes from will feature in a video soon, thanks for watching 🙂👍
Good video there Luke. 1st time watching 👍
Thanks you and welcome to my channel, hope you like my content 🙂👍
Nice in depth vid mate. I’ve got an HL that I’ve got to sort on the McCulloch I’m restoring. Beautiful old carbs, back when fat fingered men could still work on them 😂😂
Thank you, yes I really like these old carbs Tillotson made in Ireland (back in the day Stihl using Irish carbs) lucky for me I don’t have cave man hands 😂 so I don’t struggle to much with the small pieces in carbs. Thanks for watching 🙂👍
@@menditman2004 you’re a lucky man! You know what they say about men with chubby fingers…. They’re terrible with modern carbs haha.
@@MachineryNation 😂😂😂
Same carb as my 1964 ski doo lol
Hi really I didn’t know that, imo they were great carbs 🙂👍
Great content. Good work on the rebuild also mate. Take care 👍🏻🔧
Thanks 🙂👍
Hi Luke, I've had really good luck with Tillitson carburettors. Not sure if they're still made, everything is now either fitted with Walbro or junky Zama. 👍
Hi I’m not sure, I don’t think so I’m sure I’ve seen the same car with zama on it so perhaps they bought out Tillotson. They were a great carb they did make smaller ones as well but this one I like. Thanks 🙂👍
Think I had one fitted to a wood chipper pro I had once
I, not aware they made. 2 stroke chippers 🤔🙂👍
@@menditman2004 Yeah
A good carb rebuild.. where did you get the kit from
Thanks I bought the kit from eBay 🙂👍
Nice video Luke, looks like a well built carb. I've done a few Tillotsons in the past but they were a lot smaller.
I hope you got that rebuild kit from a reputable vendor and not some scallywag con man. :)
Thanks, I’m Curious why you ask where I got the kit from? 🙂👍
Oh I figured our buddy may have hooked you up with it. 🤣
@@Big_Johns No I source all my own stuff, I’ve been in this repair business long before he was about 😂
Please show your viewers the correct way to set the Control Lever - flush - with the floor of the metering chamber. If it is NOT set level, the "inlet needle" will not seat properly. Fuel flow will be cut off, if that lever sits HIGH relative to the floor of the chamber. I use a small chunk of razor blade as a level.
Hi it was ok I didn’t need to make any adjustments it ran great on the saw, It’s rare I’ve had to adjust these carbs apart from the fuel adjustment screws, so I decided not to mention it. A clean and new carb kit alone works for me every time. Bare in mind my videos are aimed at people that are not mechanics, so I don’t want to over confuse people. Thanks for watching 🙂👍
But if I come across one of these carbs again to clean I will mention what you said 🙂👍
12345. 123456. Lol
Lol