I own a tuna rail gun and was gifted a MVD roller head. I watched this video and to drill the hole he first suggested that you need a 3.3mil drill bit. Then he suggested that he should have used a 4mm drill bit. I have the 4mm drill bit from attaching the anchoring screw at the grip of the gun. Can I use a 4mm drill bit to drill the hole for the screw already in the gun. Making sure before I even take it apart. Which size hole punch and screw would I use.
will this work well with spearshafts that do not have the shark fin? becasue I think the rob allen shafts generally come with the cut notch not the shark fins
It works fine with both, I have used both notch and finned shafts. I ma currently running 174ph Triple Finned 7mm Cressi shaft and I am very impressed with the it,
I own a tuna rail gun and was gifted a MVD roller head. I watched this video and to drill the hole he first suggested that you need a 3.3mil drill bit. Then he suggested that he should have used a 4mm drill bit. I have the 4mm drill bit from attaching the anchoring screw at the grip of the gun. Can I use a 4mm drill bit to drill the hole for the screw already in the gun. Making sure before I even take it apart. Which size hole punch and screw would I use.
What did you do with the old hole ?
will this work well with spearshafts that do not have the shark fin? becasue I think the rob allen shafts generally come with the cut notch not the shark fins
It works fine with both, I have used both notch and finned shafts. I ma currently running 174ph Triple Finned 7mm Cressi shaft and I am very impressed with the it,
how to buy that MVD Anchoring system for this?I can using a normal screw but want it more tidy and look pretty.Thanks
Just Contact you local MVD stockist.
Probably very unhappy charge when the installed coil ...
what internal diameter with this roller head fit?
The RA Barrel is 26.5mm iD
MVD or Mannysub?
Either or, the MVD is cheaper the Mannysub is better quality but very expensive for what it is.