So I purchase this home security lights with the motion sensor I read some of these comments on here because I was having some of the same issues after doing a lot of researching it come out to be that for it to work right you need to use dimmable lights bulbs . I did this and it took me some time I had some tell me it's the electric wires the switch on the wall even taking the product back to get a refund back just to find out I was getting stuck with it so I did the research . Now it's working I did the settings to very sensitive and on the off position because I didn't wanted from dusk to dawn and the 3rd settings I put it on 5 minutes when something triggers it on and make sure you leave the switch in the house on. I hope this will help anyone else that is having some issues with their product. Thanks
After it is all connected, using the regular light switch, how does one change from manual (where the light stays on) to motion sensitive (where it goes on for a time period after being triggered by motion)? I have one of these and the instructions are a bit confusing.
It's been a year since I installed the dual brite sensor on this video and still doesn't work for me. All lights stay on without going off while there's no motion.
My light is supposed to be only two bulbs on until movement then all 4 on. All 4 lights stay on and calling the number on the directions has proven useless.
I called that number today and left a message. I was surprised to get an email a couple of hours later. Unfortunately, the email was basically a link to another CZcams video about how to reset one of these fixtures. I tried everything and nothing has worked. Not too impressed at the moment - I installed two of these less than six years ago and now neither one works at all. They weren't exactly cheap.
So I purchase this home security lights with the motion sensor I read some of these comments on here because I was having some of the same issues after doing a lot of researching it come out to be that for it to work right you need to use dimmable lights bulbs . I did this and it took me some time I had some tell me it's the electric wires the switch on the wall even taking the product back to get a refund back just to find out I was getting stuck with it so I did the research . Now it's working I did the settings to very sensitive and on the off position because I didn't wanted from dusk to dawn and the 3rd settings I put it on 5 minutes when something triggers it on and make sure you leave the switch in the house on. I hope this will help anyone else that is having some issues with their product. Thanks
After it is all connected, using the regular light switch, how does one change from manual (where the light stays on) to motion sensitive (where it goes on for a time period after being triggered by motion)? I have one of these and the instructions are a bit confusing.
I'm having the same issue. going nuts trying to figure it out. did you solve the issue?
It's been a year since I installed the dual brite sensor on this video and still doesn't work for me. All lights stay on without going off while there's no motion.
I tried using 4 E12 led bulbs and they're all just constantly flashing...
Wish i saw this before i bought one
My light is supposed to be only two bulbs on until movement then all 4 on. All 4 lights stay on and calling the number on the directions has proven useless.
I called that number today and left a message. I was surprised to get an email a couple of hours later. Unfortunately, the email was basically a link to another CZcams video about how to reset one of these fixtures. I tried everything and nothing has worked. Not too impressed at the moment - I installed two of these less than six years ago and now neither one works at all. They weren't exactly cheap.