It is of such a high quality that throughout the video you had me confused as to whether this was a build by an individual or a teardrop factory in Romania. Reading your replies in the comments etc, made it clear that this is one incredible achievement by an individual with some help from his friends! You mention in reply to someone that you thought it would take 3 weeks, but that it actually took 9 weeks. That is still a very short timeframe for something that is so well done!! Congratulations and may your teardrop bring you many happy journeys and memories to cherish!
Perfect! This is how every RV should be built! CNC cut plywood (not particle boards), glue and screw (no staples), pre-drilled holes, precision and detailed assembly. Thank you for showing us how a quality RV should be built. Amazing finished product, keep up the quality and the good work.
Particle board is full of formaldehyde, bad stuff. It's in carpet and padding too. They won't tell you they have formaldehyde free carpet, they have it but you have to request it.
thanks Jeff. i outsourced the cnc machining, but having a good design/cad model, and utilising proper tooling definitely makes the final product better
I’m sorry, DIY doesn’t mean a shop full of world class tools and equipment. The results are stunning, but not amateur by any means. Well done on the beautiful Trailer
I agree that this is a factory build. However, I love how everything is precut and fits into place! Love the design and the complexity. This trailer will last a very long long time. Thanks I’ve taken away a lot of ideas in the construction of a teardrop trailer.
Great educational video for those of us who're new to all this! I'm converting a 4x6 aluminum cargo trailer and construction methods are totally different. But, I plan to add a "Ramp Room" which will use many of your techniques. Thanks again!
Excellent build! I love the use of CNC cut panels. Only thing I think would add to the quality and wouldn't cost hardly anything additional is the use of XPS Pink foam. Has a higher R value and is all around a better material.
Salutare. Initial am vrut si eu sa fac o conversie dintr-o dubita. Apoi m-am razgandit cand am vazut preturile materialelor. Acum am in plan sa fac ceva asemanator cu proiectul dumneavoastra. Remorcuta deja o am. Dar nu asta este ideea. Ceea ce de fapt vreau eu sa spun prin acest mesaj este ca totul este facut corespunzator, la superlativ as putea spune: video, muzica de pe backgound, scule, editare etc. Initial am zis ca este un video din afara tarii. Apoi am vazut ca totul e facut in Ro. Bravo si felicitari pt. video! Sper sa o tineti tot asa si in curand sa va faceti un nume din asta, iar din punct de vedere finanaciar sa va mearga mai bine decat v-ati asteptat voi vreodata!
Great work! I hope to build one myself in the future. 😎 For the doors you could have left them in place with a few little tabs on the CNC router. You can then mount the hinges and cut those tabs. No more fiddling with alignment and very easy to do in almost any spot.
با اینکه کاملا مشخص هست که تیم شما حرفه ای هست ونه اماتور واز این طریق بیزینس میکنید اما کارشما بسیار جذاب واموزنده بود انجام این کار نیاز به ابزار وتجهیزات خوب در حد شما داره اما میشه با زحمتی مضاعف و با ابزار ابتدایی نیز ساخت که امیدوارم بتونم روزی که فرصتش رو پیدا کردم برای خودم اونو بسازم از ایران هستم ودوستتون دارم🌹🙏👍
Um brasileiro humilde que sonha em ter um trailer um dia... Mas aqui os custos são extremamente altos.Somente pessoas com bastante grana conseguem fazer.Belissimo trabalho. Abraço
Great trailer vid. Not sure if DIY is the proper term. CNC. Couple different welders. Professional build. DIY should be a Dremel, a dull jigsaw, and bricks adding weight to glued sides. My opinion of course.
I'm just amazed of how bad he is at doing any actual skilled work. He could have used the panels to draw over the insulating board and make a nice fit, but he decided to chop the corners like a DIY.
he did this himself. his cutter is nice and all, butt he still did all this himself. folk see cnc and whine. from their couch or toilet. a thing they will never make. hand them all the cnc in the world and they woll never give you a trailer. don't sweat the hate. thing looks nice man.
Can anyone help - how do you attached the camper to the trailer?? What makes it ....strong enough? Flexible enough? To withstand the travel/bumps? :) thank you!
Hi , your channel is amazing; I've never seen this type of construction work before. We would like to show part of your videos in some video/s report about your channel. We will add your link, your name, and your work will be mentioned in the video. Thank you!
@@christiangreen612 Hi! Thank you very much for granting us permission. We are delighted to have you as a new TOP collaborator. We always strive to provide flexibility to our creators. If, for any reason, you decide you no longer want to work with us, you can end the collaboration at any time by sending us an email to collaborators@quantumtechhd.com. We will not use your content in any of the new videos we make after that, but will leave our existing videos up so you keep getting the promotional benefit from any residual views. Keep it up on your good work. Have a nice day!
Am observat că sunteți din romania. Superbă munca ați făcut. Cat e de complicat sa omologhezi o rulotă de genu care a fost construită pe o platformă deja omologată?
this is not DIY. professional workshop with a bunch of cool machines. Yes, today we will make a light dish with ingredients that any housewife has: take a leopard fillet and marinate in marble melon juice, stuff with lobsters and put in a tandoor oven (3x3 square meters), everyone has it in the kitchen, for 48 hours. yes, let the assistants turn the carcass every hour. It's so easy, anyone can do it.
Thats Awesome Mr Green I would like request you to kindly please send me the specification of the Tea drop . would be hughly obliged. hight /witdh/length etc....
i didnt have a cnc either, (i do now) i used a local cnc company to cut the parts for me. your right it is so much easier/better to have the parts cnc cut!
@@nicolaeiovan3111 here is my shop location KLINE INNOVATION Ana Ipatescu 44 Jilava, Ilfov, Romania Postal 077120, my email is, christian@klie-innovation.com let me know a date and time which is good for you, i can send my phone number via email
If you made the door wider at the bottom (non-square), it could be up to 36in wide there and you'd be able to sit in bum first and swing your legs in. Way easier getting in and out. Worked for me!
Very skilled and and awesome shop. I was wondering if you would consider cooperating on project for furnishing one of my trailers as a camper. Your team know what they are doing and your design is optimized completely. Good luck
Thanks Michael, heres some similar parts www.ebay.co.uk/itm/143461495844?hash=item2166f8b424:g:e8cAAOSw0wld57kJ www.ebay.co.uk/itm/302633143605?epid=14037795005&hash=item4676574d35:g:4DgAAOSwfpBafZ9c www.ebay.co.uk/itm/223704805906?epid=24046876614&hash=item3415d87212:g:2eQAAOSwYAddo8P3
Excelente trabajo!! Pero como. Quedan esas piezas que solo fueron atornilladas? La vibracion. Es un problema con el pasar de los años que le afecta la humedad..... Si o si se mueve toda la estructura
You did do it yourself. Someone with access to less tools could still achieve the same results. I am sure you saved lots of time. You forgot the bathroom and the fender flares should be diamond plate or just not those.
hmm i just wish there was a way to make these cheaper for the homeless, i wana build one but cant. and i cant get a pre build one because those are even more expensive.
Dude that's not really a DIY concept...you doing it in a company with access to professional equipment and machines and with 5 to 6 people in total to work on it... If you do it professionally that has nothing to do with DIY.
I don't suppose you would be willing to share the CAD drawing with me as well? This is exactly the type of build I've been hoping to find. Thanks so much!
Christian,I love and enjoyed watching your video from start to finish.I am just curious how much is it to have experienced workers to build and sell a tear drop camper?
It is of such a high quality that throughout the video you had me confused as to whether this was a build by an individual or a teardrop factory in Romania. Reading your replies in the comments etc, made it clear that this is one incredible achievement by an individual with some help from his friends! You mention in reply to someone that you thought it would take 3 weeks, but that it actually took 9 weeks. That is still a very short timeframe for something that is so well done!! Congratulations and may your teardrop bring you many happy journeys and memories to cherish!
Thankyou very much for your kind words Andrew
Absolutely brilliant! Finished product looks so simple, yet the video shows how much was involved. Attention to detail is 1st class, well done sir!!
thanks ian, yeah its way more work than you would think. i initially thought it would take me 3 weeks, ended up taking 9 weeks
Very nice, 9 weeks? How many hours a day?
Perfect! This is how every RV should be built! CNC cut plywood (not particle boards), glue and screw (no staples), pre-drilled holes, precision and detailed assembly. Thank you for showing us how a quality RV should be built. Amazing finished product, keep up the quality and the good work.
Particle board is full of formaldehyde, bad stuff. It's in carpet and padding too. They won't tell you they have formaldehyde free carpet, they have it but you have to request it.
Access to high end precision tooling make a huge difference. Not sure I would call this a typical DIY, but awesome results.
thanks Jeff. i outsourced the cnc machining, but having a good design/cad model, and utilising proper tooling definitely makes the final product better
Christian,you and your friends did an awesome job of building the teardrop camper
Love the music and it's amazing how mutch detail goes into a teardrop I'm wanting to start one soon I have not decided the exact design yet
I’m sorry, DIY doesn’t mean a shop full of world class tools and equipment. The results are stunning, but not amateur by any means. Well done on the beautiful Trailer
I really like your design style for the kitchen area! You did an amazing job! Thank you!
cheers bro!
Truly awesome build & love the music.
I agree that this is a factory build. However, I love how everything is precut and fits into place! Love the design and the complexity. This trailer will last a very long long time. Thanks I’ve taken away a lot of ideas in the construction of a teardrop trailer.
Awesome build, and the jazz music was nice as well!
Great educational video for those of us who're new to all this! I'm converting a 4x6 aluminum cargo trailer and construction methods are totally different. But, I plan to add a "Ramp Room" which will use many of your techniques. Thanks again!
no probs, good luck with your build!
Excellent build! I love the use of CNC cut panels. Only thing I think would add to the quality and wouldn't cost hardly anything additional is the use of XPS Pink foam. Has a higher R value and is all around a better material.
Superb! Nu știam că există și pe meleagurile noastre pasionați de construit rulote. Bine de știut! Foarte frumos a ieșit.
Salutare. Initial am vrut si eu sa fac o conversie dintr-o dubita. Apoi m-am razgandit cand am vazut preturile materialelor. Acum am in plan sa fac ceva asemanator cu proiectul dumneavoastra. Remorcuta deja o am. Dar nu asta este ideea. Ceea ce de fapt vreau eu sa spun prin acest mesaj este ca totul este facut corespunzator, la superlativ as putea spune: video, muzica de pe backgound, scule, editare etc. Initial am zis ca este un video din afara tarii. Apoi am vazut ca totul e facut in Ro. Bravo si felicitari pt. video! Sper sa o tineti tot asa si in curand sa va faceti un nume din asta, iar din punct de vedere finanaciar sa va mearga mai bine decat v-ati asteptat voi vreodata!
multumesc!
You do great work, that shop is an absolute dream!
Even though this is a gopro fast vid, It is still fantastic to see the procedure of the building process, Thanks very much.
Great work! I hope to build one myself in the future. 😎
For the doors you could have left them in place with a few little tabs on the CNC router. You can then mount the hinges and cut those tabs. No more fiddling with alignment and very easy to do in almost any spot.
Spot on! That's engineering meeting the tradie
با اینکه کاملا مشخص هست که تیم شما حرفه ای هست ونه اماتور واز این طریق بیزینس میکنید اما کارشما بسیار جذاب واموزنده بود انجام این کار نیاز به ابزار وتجهیزات خوب در حد شما داره اما میشه با زحمتی مضاعف و با ابزار ابتدایی نیز ساخت که امیدوارم بتونم روزی که فرصتش رو پیدا کردم برای خودم اونو بسازم از ایران هستم ودوستتون دارم🌹🙏👍
thankyou bro! good luck with your future build!
@@christiangreen612 🌹
Um brasileiro humilde que sonha em ter um trailer um dia... Mas aqui os custos são extremamente altos.Somente pessoas com bastante grana conseguem fazer.Belissimo trabalho. Abraço
DIY my backside, access to tools and space that most of us do not have. Click bait. But really nice work by this builder and his crew.
The perks of working in a shop, I would have built one aswel. Looks good 👍
Muchas Felicidades Joven Por Su Canal.
Saludos Cordiales Desde Mazatlán, Sinaloa, México. ..
Great trailer vid. Not sure if DIY is the proper term. CNC. Couple different welders. Professional build. DIY should be a Dremel, a dull jigsaw, and bricks adding weight to glued sides. My opinion of course.
Just putting this out there... I really like the way that you wear your jeans, and you are very pleasant to watch. Hope to see you return! ☺
I could buy a teardrop trailer for the price of the CNC machine. DIY is a misnomer. This is a factory build.
Yeah even renting one with a 48 by 24 cutting area is 1500 a mo.
He’s just showing how far ahead of the game he is vs avg joe in garage and handsaw. It’s good to have every modern tools at his disposal.
You could cut with guides/those glue ups not necessary.
I'm just amazed of how bad he is at doing any actual skilled work. He could have used the panels to draw over the insulating board and make a nice fit, but he decided to chop the corners like a DIY.
he did this himself. his cutter is nice and all, butt he still did all this himself. folk see cnc and whine. from their couch or toilet. a thing they will never make. hand them all the cnc in the world and they woll never give you a trailer. don't sweat the hate. thing looks nice man.
Good build. And awesome soundtrack. Don't know which one I enjoyed more :-D
Can anyone help - how do you attached the camper to the trailer?? What makes it ....strong enough? Flexible enough? To withstand the travel/bumps? :) thank you!
Beautiful job! The construction and fit and finish are amazing. That's a nice shop you have.
Nice build Christian. Textbook work. Love it.
thanks bro!
I would buy this trailer, or one like it, in heart beat!
Superbe réalisation pas facile à réaliser si on est pas du métier, mais autrement rien à dire ,félicitations cordialement Michel Perez.
Dude, thats a super cool build. Kudos to you
и плотник и жнец и на дуде игрец :) на все руки мастер. любо дорого посмотреть :)
Hi , your channel is amazing; I've never seen this type of construction work before. We would like to show part of your videos in some video/s report about your channel. We will add your link, your name, and your work will be mentioned in the video. Thank you!
sure, no probs!
@@christiangreen612 Hi!
Thank you very much for granting us permission. We are delighted to have you as a new TOP collaborator.
We always strive to provide flexibility to our creators. If, for any reason, you decide you no longer want to work with us, you can end the collaboration at any time by sending us an email to collaborators@quantumtechhd.com. We will not use your content in any of the new videos we make after that, but will leave our existing videos up so you keep getting the promotional benefit from any residual views.
Keep it up on your good work. Have a nice day!
great shop, great job, great fun!! Congrats
Great looking teardrop!
Am observat că sunteți din romania. Superbă munca ați făcut. Cat e de complicat sa omologhezi o rulotă de genu care a fost construită pe o platformă deja omologată?
Nu cred ca trebuie omologata. Practic ai o platforma cu care cari niste lemne si fier. :)
Génial. Bravo pour ce beau travail. Bonnes salutations depuis la Suisse. BNM
Superb, enjoy friend and have a nice day !!!.
this is not DIY. professional workshop with a bunch of cool machines. Yes, today we will make a light dish with ingredients that any housewife has: take a leopard fillet and marinate in marble melon juice, stuff with lobsters and put in a tandoor oven (3x3 square meters), everyone has it in the kitchen, for 48 hours. yes, let the assistants turn the carcass every hour. It's so easy, anyone can do it.
Thats Awesome Mr Green
I would like request you to kindly please send me the specification of the Tea drop .
would be hughly obliged.
hight /witdh/length etc....
Perfect. So well done. Setting the bar very high. Thanks for showing us all.
Too words buddy. First class.
Well done, Love it!
Proper tools make things much easier. Wish I had that shop so I could build one. I think I’ll buy a precut kit
i didnt have a cnc either, (i do now) i used a local cnc company to cut the parts for me. your right it is so much easier/better to have the parts cnc cut!
Very well done, congratulations
Foarte profi!Un pret pentru un asemenea lucru,sint interesat.
multumesc. are you near bucharest? if so you can visit my facility and we can discuss specifications and price
Ok,pot veni in bucuresti.Datl-mi un mod de contact.
@@nicolaeiovan3111 here is my shop location KLINE INNOVATION
Ana Ipatescu 44 Jilava, Ilfov, Romania
Postal 077120, my email is, christian@klie-innovation.com let me know a date and time which is good for you, i can send my phone number via email
Wow great job
Привет! У тебя получился очень крутой прицеп. Кемпер круче когда сделал его сам!
I was thinking of doing my own and now i want to buy one of these
Great work! Thank you for share it with us!! I wish i can build ONE by my self
cheers Pavel, good luck with your build!
If you made the door wider at the bottom (non-square), it could be up to 36in wide there and you'd be able to sit in bum first and swing your legs in. Way easier getting in and out. Worked for me!
Superbe boulot bravo
Awesome build. Could you tell me the dimensions. Did you use a plan if so would you share?
Very skilled and and awesome shop. I was wondering if you would consider cooperating on project for furnishing one of my trailers as a camper. Your team know what they are doing and your design is optimized completely. Good luck
Tires to small the faster the car goes those little tires turn really fast add heat boom.
Very Cool build!
Świetna robota ! Szacunek za dokładność wykonania. Mogę zapytać o koszt materiałów wykorzystanych do budowy takiej przyczepy ?
Brilllant work man! Nice job, Woul you share the CAD design with us?
hi sebastian, yeah sure, whats your email? i will delete after i send the files
It’s not to diy when you have a CNC machine, but still pretty awesome.
What tools you have does not define DIY.
Hermosa,quiero una así para recorrer mi Argentina 🇦🇷👏👍
Beautiful and good work. i want to do one for myself. Have you travel outside Ro with the mini camper? (btw i live next to Bucharest) :)
do you sell the inc cut files ?
สวยมาก awesome ❤🎉😊
Davvero molto bravo i miei complimenti
Can you post the sink, cooktop and refrigerator models? Very nice built and those commenting about the CNC machine are just jealous ;-)
Thanks Michael, heres some similar parts www.ebay.co.uk/itm/143461495844?hash=item2166f8b424:g:e8cAAOSw0wld57kJ www.ebay.co.uk/itm/302633143605?epid=14037795005&hash=item4676574d35:g:4DgAAOSwfpBafZ9c www.ebay.co.uk/itm/223704805906?epid=24046876614&hash=item3415d87212:g:2eQAAOSwYAddo8P3
Frumos 👏👏👏Felicitari !!!
Wow thank you 🙏 ❤❤❤❤ Amazing
You're an engineer? Really impressive your style of construction, congratulations Christian, you have a teardrop for many years!
thanks dany, yes i am an engineer, have a great day!
Needs £10,000 worth of sophisticated tools to build. Have you seen their workshop, only for the rich.
Excelente trabajo!!
Pero como. Quedan esas piezas que solo fueron atornilladas? La vibracion. Es un problema con el pasar de los años que le afecta la humedad..... Si o si se mueve toda la estructura
liked the stove, sink and refrig. put in video what they are. Never seen the corner there burner before
hi richard, i just bought it on ebay, do a search for dometic 3 burner stove, also dometic sink, and dometic fridge all on ebay
@@christiangreen612 thank you very much.
subscribed keep with the nice work!!
Magnificent!!! 👏
Felicitări!
Beautiful build but the background music is so annoying, I had to mute the sound
You did do it yourself. Someone with access to less tools could still achieve the same results. I am sure you saved lots of time. You forgot the bathroom and the fender flares should be diamond plate or just not those.
hmm i just wish there was a way to make these cheaper for the homeless, i wana build one but cant. and i cant get a pre build one because those are even more expensive.
Total weight, tongue weight, approximate build cost? Beautiful!
Hey
What a beautiful teardrop. It look amazing. Great work.
I hope my english is not to bad.
What size is your trailer?
Thank you
Dude that's not really a DIY concept...you doing it in a company with access to professional equipment and machines and with 5 to 6 people in total to work on it... If you do it professionally that has nothing to do with DIY.
Very good work
That’s awesome 👏
Belle vidéo
Merhabalar çalışma lariniz çok güzel bu proje leri nereden temin edebilirim
Très beau travail.
Looks good! What design application was that at the beginning of the video?
autodesk inventor
I don't suppose you would be willing to share the CAD drawing with me as well? This is exactly the type of build I've been hoping to find. Thanks so much!
yeah sure, email me at
christian@kline-innovation.com
salut! de unde ai luat usa si gemaurile?
I love the music
This music is lit!
Outstanding 🎉
Christian,I love and enjoyed watching your video from start to finish.I am just curious how much is it to have experienced workers to build and sell a tear drop camper?
Hello, this is exactly the teardrop I was looking for but couldn't find. Would you like to share your drawing with me? Thank you
sure, send me an email, christian@kline-innovation.com
It looks like a high finish camper but I do not think finishes using a spray paint can will not hold up to everyday uses.
Interesant !
Cu omologarea cum ați procedat ?
Здравствуйте! Очень классная работа! Подскажите пожалуйста, где вы брали чертежи для ЧПУ? Можете помочь с чертежами? Спасибо!
Beautiful 😍 built
Love this build, is this a 5x10? Similar to what I starting on
Where do you go to buy sheet metal