2nd and 3rd Grade STEM - Building Archimedes Screw

Hi Everybody!
If you've ever wanted to know more about the screw pump (Archimedes Screw), then you've come to the right place! Today we are going to learn about one of the oldest forms of technology, the screw. We'll learn how the Egyptians first used the screw to lift water from lower areas to higher areas for irrigation. The screw pump was later introduced from Egypt into Greece.
For this build, you'll need PVC pipe (at least 1/2 inch diameter), tubing (at least 1/4 inch diameter), duct or packing tape, two bowls, and water (food coloring is optional). You can also substitute a paper towel roll wrapped in duct tape for PVC pipe.
If you tried this build and it worked, leave a comment below!
Thanks, and keep experimenting with science!
Mr. C
Photos of Archimedes Screw courtesy of:
Description: Water Power. The Archimedes screw where the second water wheel used to be providing electricity for the Mapledurham estate. At the time of visiting it was turned off due to low water levels in the Thames.
Date: 8 August 2015
Source: From geograph.org.uk
Author: Bill Nicholls
Permission: (Reusing this file) Creative Commons Attribution Share-alike license 2.0
Attribution: Bill Nicholls / Water Power / CC BY-SA 2.0
Camera location: 51° 29′ 08.38″ N, 1° 02′ 14.93″ W Heading=292°
--------------------------------------------
Description: Archimedean screw. Sculpture by Tony Cragg in 's-Hertogenbosch, the Netherlands.
Date: 12 March 2012
Source: Own work
Author: Polleket
#STEM
#technology
#Archimedes
#elementarySTEM
#elementaryscience

[@sanobermajeed1113]

Great video, very helpful

[@that_girl143]

Too good

[@unlpiccolo]

What length of tubing do you need?

[@benabele]

We couldn’t get the water to go all the way up and out

[@IngoGarza]

Isn't that a coil pump? Archimedes Screw looks different.

[@scottmicheels420]

Want toake a wind mill to power a archimedes srew transfer water to top of a water wheel back to tank