5 Common Mistakes When Making Concrete Candles or Planters
Vložit
- čas přidán 5. 03. 2021
- In this video, I go over the 5 most common mistakes or issues I have seen people having when making concrete containers for candles or planters. This is also from personal experience, so as always make sure you test your own products :)
If you have any questions - feel free to comment below! I will get back to you 😊
Enjoy the video!
CHECK OUT MY ETSY SHOP ❤️ Use Code: "CZcams20" For 20% Off! www.wizeowlcandle.com
❤️ Follow me on Instagram: wizeowlcandles
❤️ Follow me on Facebook: wizeowlcandles
Links for Materials I use 😍
Candlemaking:
Presto Pot - amzn.to/3dUqSOF
Thermometer - Digital - amzn.to/3hJDLMD
Thermometer - amzn.to/3yAOb7Z
Pitcher - 4 pounds - amzn.to/2SRBiHw
Pitcher - 2 pounds - amzn.to/2SRBiHw
Scale - amzn.to/3yLyAmv
Golden Wax 464 - 10 lb bag - amzn.to/2UzfNMo
Golden Wax 464 - 5 lb bag - amzn.to/3jTmLq8
Golden Wax 464 - 50 lb Box - www.candlescience.com
Wick Stickers - amzn.to/2VjMb5V
Wicks - amzn.to/3xBj1xa or www.candlescience.com
Warning Labels - amzn.to/3hprq12
Wax Melt Clamshell - amzn.to/36jTT2a
Wax Melt Heart Silicone Mold - amzn.to/3hlKnBL
Avery Labels 2.5 Circle - amzn.to/3yrEkBs
Avery Labels 2 Circle - amzn.to/3xsGMHR
Wick Cutter - amzn.to/3dRAIRB
Popsicle Sticks - amzn.to/3yBYBEo
Fragrances: www.candlescience.com or www.lonestarcandlesupply.com
Containers: You can make your own from concrete - here is a video on how: • DIY Colored Concrete C... Or you can purchase tins, glass, etc.
Concrete Containers:
Silicone Mixing Bowls - amzn.to/2YWzMag
Cylinder Mold - amzn.to/3ANKdeq
Oval Mold - amzn.to/3dQzR3i
Square Mold - amzn.to/2Uy3wrd
Hexagon Mold - amzn.to/3wmtPOr
3 Pack Molds - amzn.to/2Uy3Whh
Small Hexagons Mold - amzn.to/3hIV14P
Sponge brushes - amzn.to/3hKKG8n
Sanding Blocks - amzn.to/3ht3tGc
Titanium Dioxide - amzn.to/3e2wiav
Craftsmart Acrylic Paint - amzn.to/3dZucIA
Printing - Dust Covers - Vinyl Projects:
Cricut Maker 3 - amzn.to/30uUHBA (best bang for your buck!)
Cricut Basic Tools - amzn.to/30ubqVR
Shipping Supplies: www.uline.com
** Some of the links above are affiliate links. This means that if you purchase from my links, I get a small revenue, helping me sustain the content I create, with no extra cost for you. I only share links to products I believe in, tried, and enjoy using myself! :)
******************************************************************************************
If you have any questions please feel free to post them below and I will be happy to answer them!
Don't forget to subscribe so you see my new videos! 1-2 new videos weekly! ❤️
_______________________________________________
I do not own the music in this video. all attributions: Snapmuse.com
#concretecandle #diyconcrete #marbleconcrete #wizeowlcandles - Jak na to + styl
Thank you so much for taking the time to create this video. It was incredibly helpful for me as I'm experimenting and testing to find the right formula for my cement bowls. It was challenging at first to understand the need for adding sand to the cement, especially since we don't have a ready-made mix like Cementall here in Bulgaria. Your insights have been invaluable in guiding me through this process.
I'm so glad it was helpful! Thank you for watching!
Almost 1000 subscribers!!! Keep up the good work Kayla!!
Thanks!! ☺️
Thanks ❤️ you're CZcams channel is soooo helpful for me 🥰
I'm so glad :) thank you for watching!
watching this before i start, thank you for the tips ! love how well you explain things, thanks for sharing
Absolutely! Thank you!
Thanks for the tips! I'm a beginner, your videos are super helpful!
I'm glad they are helpful :)
These are great tips! Thank you so much!
Absolutely! Thank you got watching
Thank you! I am also a beginner and love the tips.
I am glad they help!
Thank you so much. Really easy to listen & follow 😎
Thanks for watching!
Great video Kayla!
Thank you!
Awesome tips !
Thanks! I'm glad it helped:)
I will try my first project. Thank you for your videos. They are very inspiring specially if you are just starting and afraid of fail or give up. Bless.👌🏽👌🏽👌🏽👌🏽💝😎
Thank you so much!
Thanks!!! very helpful!!!
You are very welcome!
Soo helpful thank you 🙏
Thank you for watching!
Thank you so much for making this video! I'm a beginner and have made 4 of the 5 mistakes! I'm getting better thanks to your videos and lots of practice!
I'm so glad they are helping :) it takes practice, you got this!
Thanks so much for you tips☺️
Of course!
Thank you for sharing.
You're welcome! Thanks for watching!
Thank you for sharing. I have just subscribed to your channel. Love and greetings from Pretoria,.South Africa 🇿🇦💝🌻
Hi! Thanks for watching!! 🙏
Hi, your videos are nice and clear and helpful.
i have just made my first concrete candle container with the plan to pour candle wax directly into it. I had planned to paint over it with acrylic paint but wondering if i can paint it on the inside also and maybe using a sealer over it. After watching these videos i perhaps should have added the acrylic to the concrete mixture instead.
Hi! I would say if you do paint the inside to seal it twice at least :)
These tips are so helpful! Thank you 😊
Absolutely! I am glad they were helpful :)
Thank you so much,for vidioès,your so good at explaining how to do things, you are a lovely person, hope you do not mind me asking,how do i make coasters for hot drinks, and do i nead to add àny thing else to the cement, and what paints i use for marble effect. Regards Bonny.
Thank you for watching and your kind words! I have made coasters before by pouring the cement mixture into a coaster mold from Amazon. Same measurements I do a 1 to 3 ratio (1 part water 3 parts concrete). You can either apply sealer to make the coaster water proof or I have also not sealed and the condensation soaked into the concrete. That part comes down to preference. I hope that helps!
Thank you for this video very helpful 🤍
You are very welcome!
Thank you ❤🌷
Thank you for sharing your videos
Iv owned my business now for 8yrs Making & Selling The Safest Soy Candles + Soy Melts in the world plus various 100% Natural body Products & I can’t wait to give making my own Candle holders to my collection, it will obviously save me money due to not having to buy Candle Jars.
I’m based in Australia 🇦🇺
Sending Hearts, Hugs, Health & Happiness from Australia 🇦🇺
How cool! Soy candles are the way to go 🌿🙌 thanks for watching!
Hey Aaron I’m from Australia but what sealant do you use? I want to do a few things for my house 😂
Hi love your video. Would you mind sharing what you use as a sealant please
Hi! Thanks for watching! I use a water based sealer
Thank you so much. Have you ever made terazzo chips to add to your cement vessels?
I haven't yet!! This is definitely on the list :)
Thank you thank you
You're welcome!
Love your videos. I just started making concrete vessels for my candles. What sealant do you use? I accidentally bought a wood sealer!
Hi! I use polycrylic. Technically it is a wood sealer however all my testing has shown it works great on concrete too :)
Thanku😌
You are very welcome!
Cement All is actually a grout. It says so on the box. Cement+ water = Cement (basically a glue or binder). Cement + sand = grout (Cement All, stronger than just cement). Cement + sand + aggregates(gravel) = Cement (stronger than grout).
It's easier to say cement or concrete when referring to these jars but Cement All is a grout. Knowing that means you can find alternative grouts or making your own.
Thanks for the comment! 🙌
@@WizeOwlCandles your vessels are amazing btw!
Thxxx💓
You are very welcome !
this was super helpful! one question I wanted to ask is did you find when testing the candle caused the vessel to crack??
Some of mine cracked and that was due to the consistency when I originally poured. It was too thin. Try thicker :)
What are your tips for when putting the sealant on , the brush strokes doesn’t show? How do you get a nice and clean finish? I use the sponge brush and a regular soft bristle brush, however the strokes still show 😕
I use a foam brush. I usually have to go over the sealant multiple times to smooth it out. I use Polycrylic. What sealant do you use?
Thanks so much for this! My question is...how do you get a nice white vessel? Do you colour your cement-all or buy white cement?
Hi! I use titanium dioxide to color the cement :)
Grazie 😊
You are welcome!
Hi, can the sealant inside the container affect the hot throw of the candle? thank you
Hi I’m a little late on this video , but I was wondering how can I avoid cracking when lighting my candles with the vessels ? What sealant is best
Hi! I use Polycrylic for my sealant. I would say make sure you are also not adding too much water and to stir the concrete for a good two minutes or so before pouring :) hope that helps!
Hiiii thank you soo much for the video. I'm a beginner and haven't started anything in the candle business, planning to start. what suggestion u would give me as to what should I do the testing and should I start with jars or with the molds. I'm a little bit confused about what would be better. i hope u guide me with this
Hi! I personally started with jars and then moved onto make my own containers. However pouring the candle is going to be very similar in each container so it really depends it you want to have more labor making your containers or ordering them. Hope that helps!
Thank you for the advice
Can i make a container of plaster with out using cement for candles
I have seen people do this :) I just don't have any tips as I have never done it.
Your explanation was so clear and thank you for the tips and tricks. I'm from London, UK and will also be making my own candle jars, all the videos that I've come across are USA based and you all use Cement All. Do you know of another brand that I'd be able to get in the UK that would still work like Cement All. I'm very new to this and hope to make my first one soon. Thank you in advance xx
Hi! I'm not sure what a different brand as I only use cement all. However you can buy small.portions and test it out :) just stick with concrete not pure cement.
Hey, did you ever find a good brand of cement in the UK?
Thank you so much for your video! Vessels can be very expensive and I want to try and make my own. If you want to make them white do I put white acrylic paint in the mix?
I did white acrylic paint for a while. I'm going to be trying something new and posting about it. But I am trying titanium dioxide
@@WizeOwlCandles thank you
Thank you ! How does you jar doesnt crack when you take it out the mold?
I haven't really had that issue it has to do with the consistency when you pour. You don't want it too thin :) thanks for watching!
Hi ! :) little question for you... do you light a candle in each vessel before selling or you test one vessel by lighting a candle inside and then only test again if you change de vessel recipe (more or less water, color etc..)?
Hi! I test each container and wick. Then I test the fragrances . So for example I know a specific wick works for my ovals so when I test it's more for fragrance oil and the container. :)
So if I had 3 different containers and 3 different scents. I would test 9 candles. I hope that helps! 😊
Thank you for the tips! Do you know where to get non toxic fragrance? I heart eos don't stay so it's better to use fragrance. I can't find any good websites. Thx
I use candlescience for my candles :) thanks for watching!
Can u make video of cement mistakes i wanna ask why my white cement crack right after its curing ? Nd after demolding it break easily by pressure by hand
I use concrete not cement, the concrete has additives to help with strength. It may help with some additives :) like sand
Thank you, so did you say you just used cement all and water? Is the water distilled water or we can use tap water? Again thanks for this video it has helped me for my future projects..
Hi! Thanks for watching! I have used both tap and distilled. I have noticed distilled water performs better, less bubbles:)
Thank you this is so helpful! What do you use to seal the inside of your concrete containers?
I use Polycrylic :)
Yes I did pause you video when you showed the can lol. There are so many types and I am not sure which one is right they have a brand which is identical to your but it’s $118.00. Let me know if that sounds right. Thanks
thank you so much for the helpful video! :-) how do you avoid cracking on the bottom of the cement mold? and also what do you use to apply a design on the planters?
Hi! Cracking on the bottom I would say just make sure you aren't using too much water in the mixture and pouring enough on the bottom to meet the top of the mold.
For the design, I actually have my own stencils I use
Hello! Love your channel! In uk they don't have cement all so I'm struggling to make my vessels - they keep seeping through :( I do all the steps and use white portland cement with sealant. Any idea what I may be doing wrong?
Hi! Pur cement you don't want to use. You want it mixed with sand that helps the sturdiness of the container. I would try a mix of the cement and some sand to see if that helps:)
@@WizeOwlCandles indeed thank you! I do add sand but will try to change the ratio maybe :)xxx you're the best
Are there any toxic fume concerns with the cement sealer or the acrylic paint when heated by a candle?
Hi! I have tested out my containers with both acrylic paint and the sealer. Nothing comes off during the burning the candle :) also I use 100% soy wax so the wax doesn't get as hot as paraffin. That may help as well!
What can we use other than CementAll? Any recipe? I need some things that quick dry please, if u know how to do it please make a video 🙏
Hi! Thanks for watching! Currently I don't have any recipe or other Concrete that I have personally used however I am looking at other options as far as mixing a concrete mix and if this goes well hopefully I will be able to post a video soon about it!
Hello :) Made some cement vessels for soywax candles and they cracked a bit when the candle was burning? Has that ever happened to your vessles? Thanks
Hi! It did at the start of my candle making. Usually it was because my consistency was too thin before pouring the concrete into the mold. Hope that helps!
God Thanks. I want to try just fun. What kind of coat do u use?
Hi! It definitely is fun :) I use Polycrylic on mine
Which sealing do you use ( it has to be fire resistant or water base) thank you
czcams.com/video/91bsZAgU8yo/video.html I made a video about a sealer:)
Could these be used for planters? Have you tried eco waterproofer? I have polycrylic hopefully I can make some for my aloe
Hi! Yes I use these for planters. My sealer is water based, I have heard of earth safe sealer too that is popular :)
Everything u have explained is so clear. Thanks for sharing. Just a question what can I use if I don’t get Cement All? Thanks
Thanks for watching! I'm not sure as I haven't really found anything else that works well for me. I would recommend making sure you have a cement and sand mixture . Maybe test out a few :)
@@WizeOwlCandles Thanks a lot for ur reply. Appreciate it.
@@WizeOwlCandles could u please let me know how or what are the ways that u check for the quality or like how do u test ur products? Thanks
@@prabhneetkaur8643 hi! I test by burning each different type of container I make all the way down to the bottom to ensure no leaking into the concrete and a good wick size. I have drop tested my containers and as most containers they will break if you drop them high enough and they land the perfect way. However I have dropped mine from waist height and they don't shatter. May get scratched but that's it.
I would recommend getting your "recipe" together and then test each container :)
I hope that helps!
@@WizeOwlCandles Thank you so very much I really appreciate. This is so helpful can’t thank you enough. 👍🏻😊
A quick question: my vessels weren’t made by me but I notice the color in the inside turns brown after I pour my coconut wax and it hardens, is there any way to prevent this or like can I still add extra sealant to save the rest of the concrete vessels??
I spend so much money (first time starting a business and making candles) on my first bundle but now you have given me the courage to make my own in the future! Thank you for this!
Hi! Thanks for watching :) I'm not sure if it is the wax as I have not used coconut before. However you can try to seal the inside again if it is not sealed already and test it out. Testing is going to be your best friend to be honest.
I am so glad my channel has inspired you! ♥️ Keep going!
Where are you finding your molds? And do you know anywhere that makes or sells larger ones?
I find them on Amazon :)
after the container has set after 3 hours, do you apply the sealer automatically after or how long should someone wait before adding the sealer minimum?
I usually wait at least 24 hours :)
Hello, do you lubricate silicone molds with oil before pouring concrete?
I personally don't have to lubricate them. I have heard of people using vegetable oil :)
Also, what sealer do you recommend?
I use a water based sealant called Polycrylic
Hi I’m from Brazil, tnks for your videos. I have a doubt, my candle vessels break when I light the candle. I use cemente Portland. What can I do about?
I haven't personally tried that type of cement. I use Cement All. I would recommend a concrete mix :)
Portland cement doesn’t have any aggregates, you need to add sand to it. The proportions usually are 1 part Portland cement, 4 parts sand, 1 part water. Hope it helps!
What sealant do you use ? Great video by the way
Hi! I use Polycrylic
Inside and outside?
Great video and helpful information. Is it necessary to seal the container with polyurethane if using it for a candle? I’ve tested it without and haven’t noticed any wax leakage.
It isn't necessary if you are testing and there is no leaking. :) I don't use polyurethane, I use Polycrylic. But you don't need to if your containers aren't leaking :)
@@WizeOwlCandles Thanks for the reply. Sorry, I meant Polycrylic and not polyurethane (auto-correct got me). I'll continue to test without applying Polycrylic - trying to keep my brand and candles as organic as possible.
@@TonicMercantile I totally get it. I am testing out some new sealants so I will post about it if they work well :) trying to come up with some other options
@@WizeOwlCandles awesome - will look for that video! I"m going to test boiled linseed oil (you can get it at Lowes/Home Depot). It's safe and organic. I've used it to seal cedar planks I used to create elevated garden beds and it worked out great. It does take a while (1+ days) to dry though.
Thank you so much. I’m a new candle-maker and I’m fed up with the expense of nice , unique candle containers. I want to try making my own. Where do you buy the molds? I heard of a company called Modern Craft Labs. Does anyone have any suggestions on where to buy molds?
I have heard people buying from them yes. I personally buy from Amazon and haven't had any issues. All my links are in the description box of my videos :) hope that helps!
What is the best sealant that you recommend?
Hi! I actually posted a video about this today! -
czcams.com/video/91bsZAgU8yo/video.html
Also you said to make sure to squeeze the container to make sure it does not break so if it breaks it mean that we need to add more cement and less water? Thank you
I just test it out after i make my batch to make sure it is good. If it does break yea less water more concrete . :)
When I’m stirring my cement it’s like a dark grey. Do you use white powder or the grey? I can never tell how much paint is in it because it’s hard to see in the mix. I think I end up doing like you said, weakening the container with the amount I try to use to change the colour.
I don't currently use anything to lighten it. Just cement all. I know some people use white concrete.
@@WizeOwlCandles hey, I use white portland cement< i tried doing a pot today and the whole thing shattered :0( i'm not sure if I'm meant to add sand to it or my mixture was thin ( though it didn't seem watery ) I used to use jesmonite before but then found it hard to get hold of x
Have a question cause I see another people doing it so I just want to know what you think do I have to cure in water for 24-48 hrs after getting out jar of the mold ?Love your video. Thank you
Hi! I personally do not do water baths some people like to do them however I have not found them required with mine. :)
Thank you!! So much for fast response!
hi.. can you please tell about sealers
I personally use Polycrylic. A lot of people have their own personal preference :)
Hi! I’m really struggling with getting the container to not crack. I’ve been using Quikrete, but wondering if there’s a better difference with Cementall? Literally, as soon as I unpeel from the silicon, it crumbles
I use cement all :) so yes I would recommend it
Also, before you demold, you may have to put it in a water bath. Cenent get stronger the longer you leave it in water. I leave mine in for upto 2 weeks. I’ve realised people are creating weak structures.
Hi
I have started making my concrete vessels,and have experience cracking with some of them.
What it the ratio?
I have used 4:1 and 3:1. I usually eyeball it as I add water. You want a "Pancake like consistency " not too runny but not too thick. Hope that helps! If you are having cracks I would try less water
Kala is there any chemical which can enhance cement strength?
I'm sure there is. I just never had to use it with my products
I can pour the wax without sealing the container?
No you need to seal it before pouring tye wax
Try powdered RIT dye for coloring your concrete. It's cheap and works well.
Thank you! I've been using direct colors pigments and they are amazing:)
I'll try this
@@ajminxy red is really hard though. Usually comes out pink.
@@mikelang4191 I'm only interested in black but I'm sure that'll come out gray. I've been experiencing with colored grout and maybe the black dye will make it darker.
@@ajminxy I've been able to get pretty dark grey with the RIT powder. You're not going to get black though. Close but not quite. With black I actually had better luck with the quickset 6000 PSI mortar mix. It's darker than the 9000 PSI cement all.
Hello how do you clean your mixture container easily?
I use my sink but I don't have any residue on the containers. I try to get all the concrete chunks off before rinsing :) soap and water
Is a water-based acrylic sealer good?
Yes that is what I use :)
Una pregunta, le pones a tus moldes algún tipo de aceite o desmoldante antes de verter tu mezcla ? Saludos desde 🇲🇽
Sorry I am not able to translate.
@@WizeOwlCandles he is asking if you coat your moulds with some oil or something else before you pour the cement.
@@oldbexleysoapco.8500 Thank you! I don't coat the mold prior to pouring the cement
is it okay for a concrete tray/coaster to break if it falls on the floor ?
btw thank you great tips !
If it dropped from a significant distance then yes most will break. You can put a cork bottom on a schedule that may help! Anything but plastic if dropped may break.
Thanks so much!
@@WizeOwlCandles thank you so much ❤️
I want do my small business but I’m scared 🥺
It can be scary but you got this! Chase your dreams :)
Do you weight the 4:1 ratio or just eyeball it?
The 4:1 ratio is recommended by the manufacturer. I've measured it so many times I personally eyeball the consistency at this time
I’m having trouble making the bottom smooth…and suggestions? Please help
Sandpaper. Or don't fill the mold all the way to the top just shy of it and then you shouldn't have a rough bottom
could you tell me why my diy project, a plant stand, cracked? it set in the mold for 24 hrs, then i removed it, and it needed to cure longer, so i left it another 24 hrs-out of the mold- and it was full of cracks. i used cement-all. i made sure it was pancake batter-like, but i wonder if it because of too much water?
It may be too much water. I usually charge de mold my containers within 2 hours if I need to use the mold for another project. I would say try less water :)
hi! I bought the cement all brand today and tried it out for the firs time with my molds. I bought the green one (it says rapid set concrete), but it looks like you use the blue? There are some small rocks in it which make it harder to pour.. is yours like that?
I use the blue because it doesn't have the rocks :)
@@WizeOwlCandles ah okay, they actually didn't turn out bad with the one I used.. couldn't tell there were rocks.. but I'll deff try the blue out when I buy next, thanks!
@@patrickconnelly1158 that's awesome!
When to squeeze it? Right after you unmold it or after its totally set?
When you squeeze test it I would say let it sit for a few days after applying the sealant. Just to test the strength
@@WizeOwlCandles thanks a lot
Absolutely!
how do you make grey concrete become white? in Cyprus we only have grey concrete
Hi! You can purchase titanium dioxide and this will give you the white color :) I have a video on my channel covering this. The link is also in the description box for this. Hope that helps!
What sealant are you using ??
Hi! I am using polycrylic a water based sealant. I have seen other good ones like earth safe and Rutlands used as well
Hi, do you have a problem with the wax discoloring your vessels?
I don't with the sealer I use. I have been doing two coats and when the candle is done it doesn't have any discolor :)
@@WizeOwlCandles
Thank you 😊
Do you have any suggestions for making terrazzo concrete?
I don't! Something to look into though :)
@@WizeOwlCandles I heard the product they use is called jesmonite resin.
@@edgargarciahernandez2476 interesting! Thank you for sharing. I will have to try this out.
@@WizeOwlCandles yes indeed. It's on my to do list.
Does the cement all come already mixed or you mix it with sand?
Cement all is already premixed :)
@@WizeOwlCandles thank you very much
May I know the dimension of the cylinder mold
Hi! 3x3.5
Hey,what if we make it with black cement.Will it lead to the cement container to crack with the heat of the wax?
I've never tried black cement but you xan try! I recommend concrete though not just cement. So mix sand in if it is just black cement :)
@@WizeOwlCandles what should be the ratio of sand and cement
Can someone tell me what cement I can use in the UK that matches the cement all?
www.amazon.co.uk/CTS-CEMENT-MANUFACTURING-120020010-Cement/dp/B000OV8NXQ?ref_=d6k_applink_bb_marketplace
Try this link above- it has listed other cements that are similar to cement all on amazon.uk
At the top of the link see the section "consider these items" - these look similar to cement all. Testing is going to be your best friend though :)
Do we need to seal the cement so the wax won't get sucked?
I seal so that the candle wax doesn't seep though the concrete. It also helps prevent cracks
@@WizeOwlCandles what seal do you use? Is it transparent and does it exhume chemicals? Thanks so much
@@fx6446 I use polycrylic. I tested it for heat resistance along with seeping into the candle and it has passed the tests for me. I always recommend doing your own testing though. :)
Hello, What do you for concrete? Because my concrete need 6-7 days to hard. Where is it problem? Im so sad :(
I use cement all :)
I get holes in the cement when I take them out of the mold
Try tapping the sides of the container and getting all those air bubbles out when pouring :)
Try tapping on the sides of the mold during pouring to help release the air bubbles :)
Is it possible to use mineral oil as a sealant?
If not would you happen to know a food grade sealant?
I'm testing out new sealants so I don't have all the info right now. I have heard of people using a coconut oil mixture. You can always test it out! :)
@@WizeOwlCandles ok I definitely will! Thank you!
You are very welcome!
Someone mentioned this food grade sealer it's called Cheng Concrete Sealer and I saw it on Amazon.
@@charleighann7366 thank you very much! I will check it out 💕
Not me using Quikrete today for the 1st time lol
Lol no worries I actually did too
Do you water cure your pots?
No I have tested it out and I personally didn't see a difference in strength.
What sealer do you recommend? My candles are seeping through 😭😭
I use Polycrylic. Best one for me
I just saw the rest of your videos, they are amazing! Thank you so much! 🥰
Thanks for watching ♥️
How many candles do you think can be made with a 25lb cement all box?
Depends on the mold. I would say I've been able to get 50 -60 of the cylinder molds out of the 50 pound bag
Thank you!