ATV Television Project - 2015 Polaris 50" RZR 900 Midway through..
Vložit
- čas přidán 4. 08. 2024
- ATV Television Project - 2015 Polaris RZR 900 50" Midway installing Factory UTV skids, ATV Guru bumper, KFI 4500LB winch, HighLifter 2" lift, Sedona 28" Rock-A-Billy tires, RyFab cargo box, folding windshield, aluminum top, mirrors, SLP clutch kit with one-way bearing, SLP quiet performance muffler, Bulldog ATV street-legal kit, K&N air filter, better lighting, Heat Demon heated wheel, Rotopax fuel and water packs, and more....
SEE ALL OUR OVER 750 REVIEWS @ www.ATVTV.Com/
FOR more info on this product: www.SedonaTires.com
CONTACT ME: DougMeyer@ATVTV.Com
To watch this video again:
• ATV Television Project...
To see all our videos categorized and grouped please visit the ATV Television website at www.ATVTV.Com/
On the ATV Television website you will find videos in all of these categories;
All Product Reviews
Tire Reviews
Performance Product Reviews
Polaris RZR Product Reviews
ATV and SxS Projects
Backcountry Adventures
Adventure Preparation
The Latest News
My Thoughts...
ATV and SxS UTV Tests for 2016
ATV and SxS UTV Tests for 2015
ATV and SxS UTV Tests for 2014
ATV and SxS UTV Tests for 2013
ATV and SxS UTV Tests for 2012
ATV and SxS UTV Tests for 2011
ATV and SxS UTV Tests for 2010
ATV and SxS UTV Tests for 2009
ATV and SxS UTV Tests for 2008
ATV and SxS UTV Tests for 2007
ATV and SxS UTV Tests for 2006
ATV and SxS UTV Tests for 2005
ATV and SxS UTV Tests for 2004
ATV and SxS UTV Tests for 2003
ATV and SxS UTV Tests for 2002
ATV and Side by Side Specials
Trail Tips
Sport ATV Tests and Projects
Sport Riding
Extreme Conditions - Auta a dopravní prostředky
Thanksfor the info & your show!
Your a cool dude I'm all about the adventure rides long stretched out, and enjoy your stories thank you for your time. Beats main stream TV.
Thanks
nice job. wish i had one it looks fun.
how much is your ground clearance ?
Thanks for the updates. Maybe you could address the cost of the mods and accessories for us. Would love to see more trail reviews as well as reviews of ATV's, not just the SXS's. There are still a few of us ATV riders our there - just don't get the same trail riding experience with a SXS. Thanks and keep up the great information.
It is indeed amazing, I thing I love SxSs and then I go ride an ATV and suddenly I remember you need both!
As always, very informative video. Going to contact the ATV Guru folks about bumper options for my Ace... I see they have a listing for the Sportsman, wondering if it will fit, even if there are some mods required.
They will certainly help you in any way they can.
I too hate stickers on my machines and I LOVE to the modified roof line...
Doug, I gotta know... Will those Rock a Billy's widen the Pioneer 500? I'm think about those form my next set. Only 50 miles on p500 at this time, planning ahead. Thanks!
Also, I may street legal my P500. I'm in UT, perhaps I join you on that Gran tour of Ut....
(I'm an ADV Dual sport rider, looking to do the same on an ATV)
(Correction, 500 miles..)
Unfortunately yes. They only come (at last I saw) in 10x28s. You need 9x27s on the P500
That would be fun.
Wondering why you still use K&N filters? Pretty much all the info out there on forums etc say to not use them as they allow far more fine dust to pass that stock or other better aftermarket options like the Uni, Donaldson and R2C. There is a good bit of test data proving this also.
I have used the Donaldson filters and they are incredible. But, call me old-fashioned but as I say in the video, I have used K&N filters since they came out - on my desert Huskys, off-road race cars, track cars, high performance sportscars, 4x4s, ATVs and you-name-it without a single problem. And that is a lot of machines over a span of almost 50 years.
How is the best way to remove the decals?
On a hot summer day use a hair dryer or heat gun to make them pull off easier. Then use Goo Gone or WD40 to get the rest of the gum off.
what would be handy is a link in the description to the parts that you are talking about. good video tho. have the same machine and am slowly getting it built up.
Yes it would but I figured that listing the websites in the video would be doable :-)
It helps for sure but then I get distracted by all the other goodies I see! A direct link would be cheaper for me in the long run hehe.
The other thing is that if you set up something with Amazon then we buy parts thru your link and you make a cut of the price. Something to think about.
So maybe I did it right after all :-)
When we had the show on conventional television I really struggled with having to give honest and tough reviews on advertiser's products. It cost me a lot! When I moved to the internet I decided to not have to deal with the distraction of potential profit again...
Is your rzr still 50 inches wide?
No. The new RZR 900s don't even start at 50". They come from the dealership at 51 3/4". This one with these tires and the sag measures 53".
polaris official specs still say 50.
Polaris measures from the outer wheel to outer wheel now, not the overall width including tires.
Yep those stabilizer bars were put there for a reason. They help counteract body roll in corners, so it makes them more stable for higher speed cornering. Sure it loosens up the machine but it also makes rollovers more common when removing stabilizer bars...same goes for SUVs and pickup trucks.
Do they make a hard cab for the RZRs like you can get on the Rangers? Also, what exactly is the purpose of a RZR? To me they're nothing more than a 4WD go-kart. They have no utility purpose at all correct?
Hmm, the right clutch kit it should have from the factory. Never understood why these ridiculously priced machines would ever come from the factory with absolutely no engine braking...and they are still made that way.
True. This RZR is not setup for speed. I typically figure that for something I want to go slower and travel rough terrain in then I need more flexibility. For on-road performance I want more stability.
Honestly, do you get paid by any of these manufacturers to use their products and/or sponsored by anyone?
We were on conventional television from 2000 through 2009 and had sponsors. Since then we just do the website, FAceBook, and You Tube channel. No sponsors. No affiliations. Don't owe anybody anything :-) The only advertising are the Google ads that get randomly placed on the videos.