ECS Tuning Audi B8 S4 Center X-Pipe | Soundclips vs. Stock

Sdílet
Vložit
  • čas přidán 12. 02. 2017
  • Center X-Pipe available here: goo.gl/scIbqk
    Exhaust Pipe Cutter available here: goo.gl/0hMf8S
    Change the tone of your S4 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases.
    The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially.
    Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab on the product page, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks.
    *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available available here: goo.gl/0hMf8S
  • Auta a dopravní prostředky

Komentáře • 67

  • @ecstuning
    @ecstuning  Před 7 lety +1

    Center X-Pipe available here: goo.gl/scIbqk
    Exhaust Pipe Cutter available here: goo.gl/0hMf8S

  • @matteoparisi2
    @matteoparisi2 Před měsícem +1

    That was actually a mental launch and he’s manual so that’s crazy

  • @andyy.4801
    @andyy.4801 Před 6 lety +4

    andddd im buying this now as my first mod lol

  • @OrbitalObs
    @OrbitalObs Před 5 lety

    I love the outro! I'm 100% sold on the ECS X-Pipe MOD all thanks to this video. *Checks for availability* I have to wait till the end of this month to possibly get one? x_x

  • @tman21vdb
    @tman21vdb Před 6 lety +2

    Sounds awesome. Did this just replace the middle muffler and resonators? As in stock catted down pipes + stock rear mufflers remains in place?

  • @Anhlee1903
    @Anhlee1903 Před 6 lety

    Sound really good i love it. Will you guys making xpipe for B9 S5 Sportback soon? Thanks in advance.

  • @MikeyG003
    @MikeyG003 Před 3 lety +4

    Had this on my old s4, was best bang for the buck sound mod you could do! Mine was manual too, sounded great when shifting paired with intake!

    • @tacticalwhoo9349
      @tacticalwhoo9349 Před 9 měsíci

      how good did it sound on daily drives? I want it to sound loud but not to the point where I can't start my car at night.

    • @MikeyG003
      @MikeyG003 Před 9 měsíci

      @@tacticalwhoo9349 it’s great, little bit more drone than stock, but nothing crazy or unbearable for highway drives. Def louder outside when on throttle. Deeper low rpm too. Cold starts a little bit louder than stock def nothing like where you can’t start your car at night. I have like one video on my page of how it sounds under acceleration. Got cold start video too I had recorded, just never uploaded them lol

    • @tacticalwhoo9349
      @tacticalwhoo9349 Před 9 měsíci

      @@MikeyG003 video sounded great man, appreciate your input, did you need to cut your exhaust at all or does it just fit right over? also did you do it at home in your garage bc thats what I plan on doing.

    • @MikeyG003
      @MikeyG003 Před 9 měsíci

      yeah it requires cutting and welding, Just had a shop do it. Quick and easy, think they only charged me like 100 bucks, but this was years ago lol. Mine was different tho think magnaflow x pipe like 100 bucks for that. Prob bit more expensive now. I'd recommend just taking it to shop tbh and this is coming from someone that works on their own cars lol. @@tacticalwhoo9349

    • @bronsonmackenzie8395
      @bronsonmackenzie8395 Před 9 měsíci

      Lucky bastard finding a Manual!

  • @doggiefresh241
    @doggiefresh241 Před 7 lety +4

    Holy shit finally

  • @S4RCSTC
    @S4RCSTC Před 6 lety

    That intake is loud. Is the Integrated Engineering one about the same?

  • @airs2k
    @airs2k Před 3 lety

    sorry but is there an option to have v-band clamps on your exhaust parts? I really don't like the slip on bands.

  • @AerotusX
    @AerotusX Před 7 lety +1

    Very nice! How loud is it compared to the AWE exhaust + resonator? I'm looking for something similar, without the insane price tag. Is this the solution?

    • @ecstuning
      @ecstuning  Před 7 lety +1

      We don't have an AWE exhaust to compare. Maybe someone has had both setups and can chime in. Our X-Pipe is a great affordable option for adding an aggressive sound.

  • @1efraincayama
    @1efraincayama Před 4 lety +1

    Is it much louder than stock? How many decibels?

  • @mastalee1776
    @mastalee1776 Před 4 lety +2

    Is it me or does it sound a bit raspy? I've never heard 1 in person.

  • @shaquizzle5548
    @shaquizzle5548 Před 7 lety +1

    Sounds amazing. What other mods were done?

    • @ecstuning
      @ecstuning  Před 7 lety +1

      Thanks! The other mods are:
      ECS Tuning Intake: goo.gl/mcUxg0
      APR Stage 2+ with Supercharger Pulley: goo.gl/twUqzz

  • @mjlindamood7565
    @mjlindamood7565 Před 6 lety +3

    Just got myself a B8 S4. In this video are you using stock mufflers as well? I was thinking of getting rid of them plus this x-pipe...

    • @JuergenGDB
      @JuergenGDB Před 6 lety +1

      He has a full description of what he has done. I believe he kept the stock Axel back OEM exhaust portion but changed out the center with ECS X-pipe. Myself I went all in and went with a resonated Down Pipe and full exhaust from AWE with 120mm tips. Sounds great, I plan on doing the ECU upgrade this year sometime. Congrats on your B8 S4! Cheers.

  • @deans3848
    @deans3848 Před 7 lety +1

    do you have brake kits with pads and drilled rotors for both front and rears? I see on your site that it only says rears.

    • @ecstuning
      @ecstuning  Před 7 lety

      We do! Here's two kits with both front and rear drilled and slotted rotors for the B8 S4: goo.gl/EkcWt1

  • @legendofsmoke
    @legendofsmoke Před 2 měsíci

    How the cabin drone compared to stock

  • @niknakz4339
    @niknakz4339 Před 2 lety

    What air intake you got in this video?

  • @minisub41
    @minisub41 Před 7 lety

    When you install it do you use the mufflers from the car 'tis elf or do you have to buy off brand mufflers to make it the duke exaust on each side?

  • @JuergenGDB
    @JuergenGDB Před 7 lety +1

    Crap.. I cant decide if I should by the rear carbon fiber deck lid spoiler..... is it tacky, or does it give it a better look.

    • @jamesthorpe1655
      @jamesthorpe1655 Před 7 lety +1

      JuergenGDB imo i think you need really nice wheels to pull it off (hre, advan for example)

    • @JuergenGDB
      @JuergenGDB Před 7 lety +1

      Well I put the Deval Front CF Splitter on, and then went with the ECS Tuning Rear CF Diffuser. It looks a lot better than the Deval Rear CF Diffuser. No CF wing, left it Business-Elegant looking. I then added AWE Tuning exhaust with Resonated Down Pipe. Love it, its like a brand new car.

  • @TheBassaddict17
    @TheBassaddict17 Před 7 měsíci

    What is the OE exhaust diameter?

  • @victorayala4864
    @victorayala4864 Před 7 lety

    Do I need to cut the exhaust or is the stock mid pipe removable and an even swap with this xpipe?

    • @victorayala4864
      @victorayala4864 Před 7 lety

      George Lappat thanks I actually bought pipe after watching your video and have had it on my car for almost three weeks now. Great purchase

    • @justinlai5047
      @justinlai5047 Před 5 lety

      @@victorayala4864 any drone or feel in the throttle response?

  • @MrJrolon1975
    @MrJrolon1975 Před 5 lety

    Will this work for the 2018 S4 B9 platform? Thanks

    • @ecstuning
      @ecstuning  Před 5 lety

      No, but we made one for the B9 S4. Here's a link: goo.gl/nBdWGp

  • @PKmode
    @PKmode Před 7 lety

    Got one for the C7A6 with 3.0T also?

  • @achilleastsitsidopoulos7483

    Will this leave a CEL light on?

    • @ecstuning
      @ecstuning  Před 6 lety

      No this should not cause a CEL because the X-Pipe is after the cats and O2 sensors.

  • @jamiehasted1265
    @jamiehasted1265 Před 5 lety +1

    That whine

    • @tensorfont
      @tensorfont Před 4 lety

      Jamie Hasted definitely has an intake on. Probably either IE or APR

    • @SameerBhalla5
      @SameerBhalla5 Před 4 lety

      @@tensorfont since it's ECS - likely they put their own intake on.. its called the "luft-technik intake".. that supercharger whine is wonderful though

  • @NhatHoang-mq8gx
    @NhatHoang-mq8gx Před 7 lety

    does this fit B8 S5 Cab?

    • @ecstuning
      @ecstuning  Před 7 lety

      As of now, we haven't been able to confirm fitment on the B8 S5.

  • @mikeigneri1554
    @mikeigneri1554 Před 7 lety

    just bought one heheheheh

    • @justinlai5047
      @justinlai5047 Před 5 lety

      Mike Igneri just wondering if you felt a change in throttle response due to no back pressure

  • @realisticguy2861
    @realisticguy2861 Před 4 lety

    Drone?

    • @shibidi
      @shibidi Před 3 lety

      Yes drone. At 3200 rpms or 2/3 throttle from lower rpm with high gear.

  • @tonirks-fr4554
    @tonirks-fr4554 Před 4 lety

    Hi all. she has a nice noise

  • @mangoton913
    @mangoton913 Před 7 lety

    what kind of spoiler is that? and is that you're most aggressive kind?

    • @ecstuning
      @ecstuning  Před 7 lety

      The spoiler is our own ECS Tuning carbon fiber trunk spoiler. Check out our trunk spoiler options for the B8 S4 here: goo.gl/MNamSB

  • @djprincegeorge2579
    @djprincegeorge2579 Před 6 lety

    Is this bodykit for the Audi A4 2.0 TFSI ?

  • @synocate5602
    @synocate5602 Před 7 lety +3

    145$ to ship to canada, nice...

    • @312paddy
      @312paddy Před 7 lety

      what ? I'm from calgary and i got free shipping.

    • @maximebeauchamp4470
      @maximebeauchamp4470 Před 7 lety

      where did you order it

    • @rickonsmith6641
      @rickonsmith6641 Před 5 lety

      Just looked at it today. To be shipped to NB is an extra $121USD. F me.

  • @carlos.reynoso
    @carlos.reynoso Před 7 lety

    What is that Audi lowered on?

    • @ecstuning
      @ecstuning  Před 7 lety +1

      It is lowered on ST Coilovers. Here's a link: goo.gl/1d2ZUn

    • @shawndeshaies1085
      @shawndeshaies1085 Před 4 lety

      Which wheel spacer size are those peelers on when video was shot? I like the stance!

  • @Euphorica
    @Euphorica Před 7 lety

    sounds great. "engineers" lol its an xpipe

    • @airriderz15
      @airriderz15 Před 6 lety +1

      Well, with the $1500 options by other companies, this one sounds the best and is much less expensive....