How to Make Professional, Custom Fingerboard Decks
Vložit
- čas přidán 6. 04. 2023
- Figured it was high time I did a rundown of how to press and shape these diminutive decks. Hope it's helpful!
Check out the new custom shaper blocks:
www.goodroadscollective.com/s...
Grab a countersinking collet:
www.goodroadscollective.com/s...
Or get the print files and print one for yourself:
www.goodroadscollective.com/s...
Check the shop for other board building tools:
www.goodroadscollective.com/shop
Want to support the channel? Check out the Patreon:
/ goodroads
IG: @chrisfromgoodroads
Tunes by Drew McCann:
drewmccann.bandcamp.com/ - Jak na to + styl
For the love of god please use nitrile gloves when using gorilla glue Chris! Jokes aside thank you for giving me the push in the right direction. Much love from the Netherlands.
I use packing tape to protect my mold but i've also used a sheet of felt in addition to the tape to protect the deck from the layer lines from the 3D printer.
ive been using your original design file for about a year and with FDM printing ive started to use 2 pieces of masking tape on each side of the press. Ive found that i dont get any of the lines from print lines on the press, makes a great quick release too.
Great products and videos!! Been loving the presses! The counter sick adapter thing is nice, way to make it short so you don’t go all the way thru! Smart!
Well done. You can cu t the veneer with a box cutter when its soft in the mold if you don´t have a sander.
Very nice work! Awesome content.
Incredible, it would be great to see some mold for fingerboard bushing!
Would love to see you try to tackle casting some fingerboard wheels
Good tutorial!
Thank you so much for this video 🙏
Thank you so much for the in depth explanation! I'm an old school skater from the 80's and will always be a skater at heart but I quit skating long ago so I wouldn't injure my hands or arms since I now blow glass. But I can do fingerboards!!!
I found myself a new hobby! We'll see where it goes from here!
Glad it was helpful! Have fun with the builds!
Awesome! thank you!!!
Awesome 👍🏽👍🏽
You can use a dremel to countersink the holes.
What size drill bit did you use to drill the four holes?
Ever tried tite bond? Or hot hide glue? They use it in guitar repair. Supposedly those glue joints are stronger than the wood would ever be. Might be worth a try
Titebond 2 and 3 are great for full size skateboards but since the veneers for fingerboards are so thin all of the moisture in the glue causes serious warping problems in my experience. Hide glue is an amazing material for certain projects, it's flexible and can be removed with heat (which is why it's used in instrument making) but I don't know if it would have the structural properties we need here. Might be worth testing!
for me wax paper is the easiest to remove without scrapping or sanding.
Will the new Version be sent to the people who brought the last iteration or would they have to just the new mode files again ?
Does eBay deliver to Africa? I have been meaning to get into the fingerboard business just cant seem to find any veneer in my country and I am skeptical placing orders overseas
Fala irmão, as marcas deixadas pela impressão 3d na madeira, consigo tira lixando ?
Obrigado 👊🏼👍🏼🥋
That usually works for me
yes can you please put the drill adapter up on your site and the bit to go with it? or link me to one please 11:05
Just added it to the shop: www.goodroadscollective.com/shop/p/print-files-fingerboard-countersinking-collet
What size finger board mood is it ???
what size drill? 1/16?
Did you have to dampen the surface of the veneers before applying? The directions on my polyurethane gorilla glue states the surface should be dampened to activate the glue. Is this the case?
Cheers, j
The atmospheric moisture has always been enough for me and I don't live somewhere particularly humid
@@GoodRoads ahh I see. Thanks for getting back to me. I live in the desert, so I might have some trouble without water. I’ll probably have a spray bottle handy and mist some water on before I apply glue. My only fear is that the water would cause warping.
What’s the difference between tub and radial?
Redemption fingerboards sells a tonne of veneer for decks
Drill bit size?
More snowboard videos?
I think I'd use a jewelers saw to cut the deck out.
ngl i hate routing decks but it's worth it to me 😂
I still don't fully understand why people do that.. unless obviously that is all a person has but if a person had a router, disc sander, or belt sander and chooses a router then rip
@@TCFingerboards9661 for me, its how quick the process is when you're trying to cut a lot of boards in one day. I tend to stack uncut blanks for a couple weeks and cut them all on the same day so routing them makes this go by a lot faster. with that being said, I am incredibly careful and have learned what not to do while routing with small guides without getting hurt. (luckily if im being completely honest) I wouldn't recommend anyone do this the same way I wouldn't recommend anybody go 150 on a motorcycle. but thats not gonna stop me from doing either of those things lmaooo
@@maigodied3226 😂😂 for sure man we do what we want no judgement here. Honestly I should have re phrased that and said it differently
Could you share the 3d print STL files please
All the print files are available at goodroadscollective.com/shop
@@GoodRoads thank you so much
One more question
Did you design the prints or did you find them somewhere because if you designed them I would like to know what software you used
Yes, these are my own designs. I use Fusion 360
Thank you alot
Website no longer exists....
the best hardware store is woodcraft
test