Video není dostupné.
Omlouváme se.
Honda Odyssey Transmission Oil Switch Replacement DIY
Vložit
- čas přidán 1. 11. 2018
- Here's how to replace the 3rd clutch pressure switch on a 6-speed honda odyssey.
ATF pressure switch for all clutches: amzn.to/2QcPWCI
Washer for switch: amzn.to/2QbWv8H
22mm socket: amzn.to/2SC4LjS
Ratchet: amzn.to/2PBnU6K
Clip removal tool: amzn.to/2Q9kkhe
#ad
Location of all other switches here: www.odyclub.co...
*Parts and tools*
ATF pressure switch for all clutches: amzn.to/2QcPWCI
Washer for switch: amzn.to/2QbWv8H
22mm socket: amzn.to/2SC4LjS
Ratchet: amzn.to/2PBnU6K
Clip removal tool: amzn.to/2Q9kkhe
#ad
Hello, thanks for this video. I have a 2015/16 Odyssey and I noticed this issue recently started after my 90k oil change.
My question is: how do I know the exact switch to replace? Like how can I tell if it’s the 2nd or 3rd gear switch that is faulty and should be replaced?
@@seunegunjobi1639 I had the same question
Thanks for the video, my 2016 LX 1st to 2nd gear switch is not smooth, it sounds like the switch is the same for all gears, is that right ?
@@huili2207 same exact part #/switch
If I’m getting the hard clunk at 20mph would that be the 2nd or 3rd gear switch?
I like watching his videos. He gets to the points and even tells us what tools to use. Beautiful!
Thanks!
Location of all other switches here: www.odyclub.com/threads/transmission-oil-pressure-switch-replacement-diy-2011-2017-p0848.350121/
I was able to follow your video and fix my van's issue, took me a few hours but it was well worth it. Thank you for sharing.
Awesome video Sir! I replaced this sensor on my wife’s 2019 Pilot EX with the same transmission (6AT) that was showing a P0848 code… no issues since! Thanks!
I was just googling 2007 Odyssey reliability and I see this video. I always admire how your videos are just straight to the point, no talking. Your engine bay is soooo clean! Thanks for the video. I have the 2007 Odyssey, but with VCM. My CEL comes on, but it is because of the safety neutral switch. I just clear the CEL and it goes away.
Consider disabling VCM
Disable VCM before it eats your motor mounts, cv boots, and intake plenum. Or more! Theres really no downside.
Again awesome video. Socket sizes and torques that matter! Thanks again and keep up the great work 👍
OMG! Straight to the point. Thanks for the video!
I wish I would have switched that sensor when I was in there changing the the trans filter...😅
Thank you, straight to the point. Let us know what tools are needed. Where to find all bolts and attachments clearly. And you didn't even say a word.
Good job bro I’m a mechanic myself like watching your videos keep it up 👍🏽👍🏽
Thanks for the support!
subscribe! subscribe! you da man. the most informative, actions definitely speak louder than many words
Thank you ! good silent video and DIY the switch . ! !
Hello, very good, well detailed video, the best I have seen doing this work. One question, what is the fourth cluth of those three because mine is failing on 4 and I changed the wrong one from what I see, I await your response, thanks for the teaching
Check the diagram link I posted in the comment section
That was amazing and silent.
I found my issues. I replaced the valve cover gaskets and had to disconnect wires to get more room for the back valve cover to clear the wire harness. I disconnect the 2&5 transmission oil pressure switch and didn't connect it back. I saw your post where those 2 solenoids was located at. Thank you for the informations.
Hey I just found your channel nice videos..I have a 2006 Odyssey and its in "Limp Mode" VSA check engine light on..Wont go over 3500 rpms. I just did a crankshaft position sensor any idea on how to fix it
First read the CEL code.
P0340 CAMSHAFT POSITIONS SENSOR BANK A...Ordered will be putting in asap..keep the videos rollin man you do agood job
Hey, nice video. I have a 2016 Odyssey that is doing the exact same thing at random, like sometimes when we take it out for a drive, but perfect on other drives. Is yours still running well after replacing this? Thanks!
Yes its running like a champ :)
Hello, thanks for this video. I have a 2015/16 Odyssey and I noticed this issue recently started after my 90k oil change.
My question is: how do I know the exact switch to replace? Like how can I tell if it’s the 2nd or 3rd gear switch that is faulty and should be replaced?
You need to deep scan the PCM to get the code and it will tell you which sensor is failing.
Then look at the diagrams I posted here: www.odyclub.com/threads/transmission-oil-pressure-switch-replacement-diy-2011-2017-p0848.350121/
@@MrRangerZr1 thank you. I guess I’ll have to take the van to the auto shop to deep scan the PCM
@@seunegunjobi1639 check with the autostores and see if they can check for stored DTCs.
@@MrRangerZr1 ok, I’ll do that and revert shortly
I got an OBD2 scanner…after scanning , it says the vehicle has no fault codes. DTCs stored in the ECU is 0.
I’m getting CEL, LDW, and FCW lights on after doing this. I actually think I got similar lights after installing VCM muzzler, but after a few reboots of the engine, they cleared. Should I expect similarly here, or think I might have missed a step somewhere?
Check over your install and disconnect and connect the battery
Thanks for this great video!
I have 2014 Odyssey EXL, I saw on Honda catalog that there is another AT pressure switch with the part number 28610-R36-004. I'm trying to replace both the 2nd and the 3rd switches and want to make sure that I'm ordering the right parts. Is there any chance that the other part number is for the 2nd clutch switch?
Thanks again.
This same switch is used for other clutches as well. Check the odyclub link I posted in the comment section, I have posted diagrams/locations of the other switches.
Hello sir, thank you for posting this great video. We have a 2018 with 9 speed transmission and for the longest time I couldn't find the pressure switch on the transmission. Am assuming there's none expose on these 9 speed? Am afraid the whole transmission would have to be replaced and with that do you know if it can be possible to upgrade to a 10 speed without any programming..? Thank you
the ZF 9-speed is terrible, honda used it for a short while, now they use only the 10 speed in the 5th gen
Hello have a gentleman selling an 07 fairly priced because of this p0847 code he said it's cranking but not starting though will it cause this ?? Trying to find out before I spend the 1700 ish on it
this won't cause a no start
Great video. Is there a way to replace the switch from under the van, maybe removing one of the front wheels.
Steve Biordi you can from the driver side wheel well but it will be an odd angle
love your videos!
I have change my 6th gear sensor which I believe is right on top of the 3rd, could use the same sensor as the 3rd or is it a specific sensor for the 6th gear?
Check your DM
@@MrRangerZr1 Or please answer here, lol.
Which pressure switch would affect a hard shift from park to reverse? All of the other gears shift fine.
Check your transmission fluid and motor mounts
Is the one on top the second clutch switch?
I have a 2000 honda odyssey
You would have to look at the shop manual diagram for your 2000 odyssey.
Hello I was wondering if you could see the switch for 2nd gear in this video? Whats the location?That's the one I need to replace
Check the comment section for a link I posted of all the locations of the different switches
So what am i looking for when trying to diagnose a bad switch on a 2014 odyssey?
When this happens: czcams.com/video/hMgk_cBE2Mo/video.html
I have a 2003 honda odyssey that the transmission fluid burst out occasionally when hot on hwy, was told by a mechanic that there is a pressure relief valve at top of transmission that allow s that but cannot locate such. After happening and slowly getting to a station to replace oil. Happened two additional times and just added about 3/4 quart of oil each time and good to go. What's happening and how to correct.
Check if the vent tube is blocked, that should happen. Make sure you're not overfilling the ATF.
@@MrRangerZr1 Have taken battery area and air filter out and cannot seem to locate a vent tube 2003 honda odyssey ??? THanks
@MrRangerZr1 hey brother how is everything ? I have a question what was the issue that make you change the fluid pressure switch? I have a 2010 Acura MDX with a jerking transmission from 1st to 2nd gear shift I almost tried everything the jerk occurred when driving in traffic and accelerating gently. I did changed the fluid 4 times in less than 10k miles I changed the 2nd and 3rd gear pressure switch I did changed the transmission fluid filter and nothing change I still felt the same issue.
I didn’t mention that I don’t have any warning lights on on dashboard. Thank you
@@hanselldisla4643 I'm fine brother what's up This is what is was doing: czcams.com/video/hMgk_cBE2Mo/video.html I recommend checking for stored DTCs in the ECU.
Thanks for you helpful responde. I will check it out but what was really the cause of this erratic hard shifting in your car. The 3x3 drain and fill and the ecu update ?
@@hanselldisla4643 the switch i replaced in the video was faulty and caused the transmission to go haywire
@MrRangerZr1 hey sir sorry for been bothering you a lot like you recommended me I get the foxwell nt510 the same you has and I got it today I was checking for stores DTC and I found a permanent one the code is 77-1 the functional abnormalities of fuel emission or automatic transmission and it also say that the all wheels drive was off. I was googling but I can’t found anything with that code. I do clear the code and test drive the car but it was as before. Do you have any idea what could be wrong if it’s something related to the transmission or to fuel system. Thank you
Hi MrRangerZr1 I have a 2015 odyssey have the same problem only this winter I bought it pre owned last summer i thought it was because of the weather i guess not by the way how can I get a copy of the diagram for the pressure switch thanks a lot.
It's from the shop manual
I have a 2013 and my trans don't look like that, any idea how i could find the 3rd pressure switch? Im guessing this is a 6 speed? Please help a brother out!
This applies to the 6-speed
Which sensor supports the issue shifting between first and second?
I have a diagram with all the sensor locations posted in the comment section of this video
Lol, clips never release that easily for me. I’m probably going to need to do this job on our ody.
Sometimes something as small as these clips can ruin your day lol
Great video and my only question is did you use a memory saver kit? I am changing my fluid and want to change the filter so is it required that I get a memory saver kit?
No. Just press down the radio button after reconnecting the battery.
@@MrRangerZr1 Thanks, it will make this job much cheaper and easier.
Most of the memory saver kits use a lower voltage and it isn't enough you save the memory because the Odyssey has so many gadgets I made a memory saver out of a double A battery holder that uses 8 rechargeable NIMH AA Zoe's 12-volt with enough backup current it to keep it going as long as you don't turn anything on but like he said you could just press the radio button and it resets it you don't need a code you want to save it if you were having upcoming smog check or something
I'm getting a p0878 cel light on my 2016 odessey dragging hard shifting could it also be a transmission pressure switch ?
ryate yes same code I had
Can you plez tell which one is for 2nd clutch
Check the comment section in the video, i posted a link which has all the locations
Hi this switch fix error code p0990? Thanks
Check the link I posted where I posted every sensor location and match with the sensor that went bad on yours
After you get access to all of the switches, which one is it? I can’t tell. They all appear to be the same.
By looking at the shop manual diagram.
Have problems shifting from park to reverse the whole engine rocks before shifting and when in drive wont even get to 50kph. Is it possible that this is the problem?
Erik Marvin Cruz motor mount(s) worn out
@mrRangerZr1 how are you sir ? I want to ask you did you know the location of the 2nd and 3rd gear cluch pressure switch for a 2010 Acura MDX ? I don’t know if this odyssey and the 2010 Acura MDX has the same transmission but both are 6 speed transmission . I try it searching on google but there is no diagrams or pictures that showed you exactly where they’re located. The parts number for my MDX are the same at this oddysey. Thank you .
Yes same 6-speed
Location of all other switches here: www.odyclub.com/threads/transmission-oil-pressure-switch-replacement-diy-2011-2017-p0848.350121/
Thank you so much sir I really appreciated your help .
@@hanselldisla4643 anytime 👍🏻
Thanks for the videos! I have a 2015 Odyssey and need to change the 2nd trans pressure switch. Do you have a location for that? I can't for the life of me find it. Thanks in advance
FYI hard shift 1st to 2 nd no codes
No codes? Try an ATF drain and fill first.
Would the 2006 be in the same location? I'm having a trouble getting the battery box off. I found pressure switch just above near the tire I changed but don't know which one that was.
06 is different
Can you guide us on 2007 oddessey@@MrRangerZr1
Does anybody know the part number of the 2nd pressure switch?
Same switches are used in the other gears. I posted a diagram of all the switch locations and also part number in the comment section
How many pressure switches are there? should they all get replaced?
Not necessary, which ever is failing should be replaced.
Did this fix the slow speed jerky transmission issue?
Nah that's normal for these hondas.
What is the part number for a Honda odyssey 2011 ?
Check the description
What year is your Honda Odyssey ?
Mine is a 4th generation.
Will this work for a 2013 ?
If it's a touring yes. Check the description for the applicable list.
how many transmission pressure switch it uses?
i wanna replace all
No need really, there's more than one.
I got P0990 error on my honda odyssey 2016... what can it be?
One of these solenoid. Check my thread on odyclub for diagrams.
Do you know where is 2nd gear switch?
dzionassi 2nd clutch switch is near the j pipe DM me on twitter for pic @MrRangerZr1
How did you diagnose that this was the problem?
Stored code in the PCM.
I replaced the sensor n it's still doing the same thing what should I do next ?
Check what code it’s giving
P0848
I am having the same issue but with 2nd gear. How do you identify second gear out of all of those? looking at the diagram it has 3, how did you know which one to change?
Yeah, forgot to mention. Thank you so much for taking the time to make the video.
Shop manual. The 2nd gear switch is near the power steering rack.
@@MrRangerZr1 can you share a picture to help out.
@@itsjirahetadid you ever locate A 2nd?
@@astroimagers Yeah, its close to the power steering rack. I eventually found since I have a broken power steering rack and was cleaning it and bump into the 2nd gear switch. Looks like I will have to swap the PS rack. Not a fun job. But waiting for the summer to be gone. I am in Texas and the heat here is no joke.
MrRangerZr1, is this applicable to the 3rd Gens? I have 2009 Ex-L.
Similar process
@@MrRangerZr1 Thank you!
Does judder/shudder stopped also when you change this switch ? Or it solved only big problem with 3rd gear ?
No shuddering was never resolved and cannot be resolved, it's just a honda thing...I tried software updates to changing to different ATFs, no difference.
How did you derive at it being that switch and not others?.
Shop manual
@@MrRangerZr1 The shop manual outlined the issue you were having? I have no problem replacing mine, seems easy enough, but I'm just curious if it could be any of the other ones. Ah well, ordered and will attack it within the next couple weeks. I'll update if I come across anything interesting.
Yes. What problem/code are you getting?
@@MrRangerZr1 no code, just shifting between 2nd and 3rd. Like it drops a gear, gets confused and shifts back and forth. Or it will hold a gear for too long. Usually 2nd or 3rd range.
@@walperstyle most likely had a stored code get a scanner on it
Is that senor B, error code P0848?
IIRC, yes. I have all the sensor locations listed on OdyClub.
What year odyssey is this
2011-2017 6-speed
Wich is the 6th clutch?
Right above the one I replaced in the video.
Just had a transmission mechanic quote me $650 to do this job.
Wow
@@MrRangerZr1 They are such slime balls...
It's code p0848 or p0847
mine was p0848, but you can use the video for the other solenoids too. Just need to know which switch is bad.
Why do you have to replace?
See this video: czcams.com/video/hMgk_cBE2Mo/video.html
@MrRangerZr1.... I saw the pic you posted on odyclub that shows the 2nd and 5th switch right next to each other. Can you tell me where on the transmission this picture is showing? Is this pic looking from underneath the car? From this image www.odyclub.com/threads/transmission-oil-pressure-switch-replacement-diy-2011-2017-p0848.350121/#lg=attachment155224&slide=0
Yes underneath the car. See the rear motor mount and J-pipe?
@@MrRangerZr1 Awesome. Thought so. I appreciate the quick answer. I will be changing the 2nd switch this weekend on the wife's 2016 Odyssey EX-L, when the part comes in.
@@ART224 some reason these have switch/solenoid issues. At least the internals are strong.
@@MrRangerZr1 Last time I messaged about pressure switch A, I was at about 49k. I just replaced the same one again at 74k. Ironically, both times they went bad about 4k miles after I drained and filled the transmission fluid. Have you ever had one last only 25k miles? Seems like a pretty short life for this part.
@@ART224 coulda been defective parts
Does anyone have a good video and/or picture of where the 2nd clutch switch is located?
I have the diagrams posted on odyclub