Lobby Update Part 2
Vložit
- čas přidán 29. 12. 2023
- Just waiting for the Carpet, Candy Counter, 2 Arcade 1up Fast And The Furious. The movie posters are snap frames. I  built the wooden frame, and then mounted the snap frame. the movie posters are backlit with Govee LED lights strips. Drapes will be replaced with a full wall pleated drapes from floor to ceiling. the windows is only 29 inches wide, but the drapes will cover that whole entire wall.
- Věda a technologie
One word: WOW. This is gorgeous and wonderful. Very, very well done. Subscribed!
Thank you! It really means a lot!
Nice! Can you tell me the build process of those lighted box movie posters?
I bought the Snap Frames from Amazon. There the 27 x 40 SnapeZo brand. Then I built the wooden frame, the exact dimensions of the snap frame itself or a little smaller, depending on the look you want. When I built the frame I finished nailed them together I did not use screws. Had a problem with the wood splitting even though I pre-drilled them. At that point I painted the frame and let dry. Lay the wooden frame on the ground and use a framing square to square the corners. Then set the snap frame itself right on top of the wooden frame with the snap frames open. The snap frame has a groove on the inside where you can screw right through into the wooden frame. Make sure that the snap frame is even on the wooden frame all the way around. Once screwed in the frame becomes sturdy, I didn’t put a backing on the wooden frame I left it open. That’s the way I decided to do it. Other people have a backing, which is up to you. I have my LEDs directly onto the wall on top of silver Christmas wrap paper. Most people use foil tape, but I didn’t want the walls messed up with the adhesive backing. I use the Govee 32.8 foot light strip the cheapest one I could find.
This is an amazing setup and super clean. I have the exact same sconces. One minor complaint is that they tend to rattle a bit with heavy bass despite me putting weatherstripping tape in the back. Possible some of the rivets might be loose
I was afraid those sconces would rattle. Thanks. I don’t have my Theater done yet as far as components. But when I clap my hands, I can hear the sconces ring a little.
Ready nice! What is the product on the ceiling?
They’re made by Art3D. There PVC wall panels. They have different designs also.