Extreme BMX Repair Using the WRONG TOOLS!‼️🤯
Vložit
- čas přidán 25. 03. 2024
- Watch along as we push our BMX workshop skills to the limit.. With this Extreme BMX rear wheel revival inside the skatepark! 🚀🔥 Without the correct equipment, we’ve used our imagination & BMX restoration mastery to turn this worn out wheel into a special custom front wheel! 🤩♻️
.
Follow us 👉 @t77bmx 👈 RIGHT NOW!‼️ So you don’t miss our next Extreme BMX rescue mission! - Hry
![tattoo printer tutorial[제품단순선물]](http://i.ytimg.com/vi/g40_GwEJak0/mqdefault.jpg)
Ah you made a front wheel from a rear wheel! Great idea
He’s tuning it
可以翻译吗
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
❤❤❤❤❤❤
@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.
Chilling under the ramp at a skatepark while its raining is a vibe
Or not well😢😢😢😢😢😢😢😢
Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.
@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️
And probably sitting in piss 😅😅
@@goodhouse91021 lol don't ruin it!
“Mum that strange man’s under the ramps again”
Hahaha 🤣
Keeps the park cleared though 😂😂
Bro reinvented the wheel.
Underrated comment
Damn I thought the same kudos
Retuned the wheel more like it
A shit vibe 😂
Not really... wheel builds are a pretty common thing...
Yeah that alignment was accurate as hell😂
I was feeling like I was dumb, but then I saw this short and it made me feel better.
very good 😂
😅
why ??
@@mirza6399 because he turned a back wheel into a front wheel
😁💯👍😆
The patience you have to have to to true a wheel is insane.
Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them
Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming
We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel
I was thinking the same thing
I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.
I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂
I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical
Me too. i have one sitting in my front room for months
trial and error. practice makes perfect
This and 10 speeds is the worst of bike building
@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp
Гений. Ломал заднее, устанавливает переднее.
Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️
🤣🤣🤣
This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙
before vs before😆
Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘
Yeh you tune your sit heights.😂
It's a bmx about the only things changing is seat height and tire pressure.
@@fotis3v480 get fuckin' rekt. You just got boomersplained to.
Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.
He literally turned a back wheel into a front wheel. He’s got 2 front wheels now
When u feel dumb, just remember this guy exists
try doing this urself bucko
Look at the caption first
Useless comment
😂😂😂😂
What did he do wrong?
chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?
Creo q es para poder centrar la rueda, puede utilizar el trinche como guía
@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada
@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set
@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta
yep. you're exactly right. it's a total setup oopsie video
Video ended when he found out how difficult is to true spokes by eye
Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!
@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work
@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel
@@elparpo9 You've gotta loosen the spokes where the wheel is too flat and tighten the rest, or tighten the spokes where the wheel juts out and loosen the rest. Radial truing is definitely harder than lateral. I would recommend going back and forth between radial and lateral truing for the best results.
@@TorontoPopulistConservative thanks, and 2 (two) hands full of patience
Наши руки не для скуки,
Работа, ради работы.
Продолжаем в том же духе.
We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content
qeq
ему бы в армию бордюры красить
Yeah I’m just gona pop down the bike shop and buy a new wheel
Chicken
@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin
В этом теряется весь вайб DIY.....
@@Tim_On_Line 🤷
Bro made it look way too easy
It's called editing....
Just happened to have the right length spokes with him but not the right tools 😂
😂😂
pro in truing dangg!
Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊
This deserves way more views.
Thank you so much bro thats awesome!!! 👊👊👊
wheel building kinda goes hard ngl
FTP G*59
G59 till the grave
My man's went on Straight tweaker status
HAhahaha 🤣
Now *THAT'S* "BeSpoke!" 😊
Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊
I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps
Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊
No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.
You a real one my guy.
Thank you my brooo!! thats too kind 👊👊
Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match
Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂
Thank you for explaining. I was confused
Bro I need a new rear rim u got any old ones u can ship
They're identic
There aren't front or rear rim
@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify
@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels.
tire
rim
spokes
hub
all together make a wheel.
The people who made the bike be like 😭
Wheel building is one of the hardest parts of bicycle maintenance
YES! I Couldnt agree more! aha 🔥🔥
No way you did it at the skate park, thats hard core bro 😂😅😊
Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊
Who knew a homeless man was this skilled?
Thanks bro! 🔥🔥
Bro demolished his old wheel to construct a new wheel
haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊
I really spoked to see the end result, amazing 👏
Thanks brooo!! 🤣👊
My guy snapping those tire rods like it's nothing
he attacked that wheel like it owed him money
🤣🤣🤣
😂
This is an influencer that can actually teach you something
Thanks a lot Bro! 👊👊
Irony being when the wheel wasnt even straight
hahaha its ok it is now! 👊👊
His patience is unmatched
i honestly never knew you could do this. thanks for the education.
Not gonna lie, you had me in the first half😅
And then you forgot a Torx Screwdriver 😜
Hahah yes that would be even better brooo!!! 👊
Man this dude works fast !!! 🤔
Thank you broo!! 👊👊👊
The unemployed friend on a Tuesday afternoon
HAhaha. Not quite... But thanks for the comment! 🤣
@@T77BMX entirely satire, turned out great and you did something I never knew before.
You know what they say, one man’s skating ramp is another man’s garage. 😅
The unemployed friend on a Wednesday afternoon lol
Sheeott, I thought you was going to make a basketball hoop.
Hahaha!! niiice man, thanks for the comment👊👊
@@T77BMX 👊👊
I see the truing at the end haha😂😂🙌🏽
Haha!! Glad you liked it!
Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅
Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊
@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣
"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"
YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!
This guy is a super genius. He took the back wheel off and put it on the front. Maybe you shouldn’t quit your day job just yet.
Because we created a NEW front wheel for our customer. The old Rear hub needs internal servicing & The old spokes were rusty and seized - So this way we have created an awesome NEW front wheel without having to throw anything into the bin! 🔥🔥🔥
switched from water, to H20😂
Yup. That's how it's done! Watch and learn!
You the man!! 🙌🫡
@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad
Trued that wheel like a champ
Thanks brooo! 👊👊
Your humor is top-notch.
This takes me back to when I use to ride..
YES!! thats awesome bro thanks for the comment!! 👊👊
Reminds me of my childhood 💯💯💯💯 love it 😊
Wiiicked! Thanks for the comment dude we are glad you enjoyed it!
Bro ain’t no way you finished that shii by eye.😂💯
He is a genius. He took the back Will off and put it on the front of the bike wow.
Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊
You'd be surprised how few people can work on a bike
YES! thats so true bro 👊👊
I subscribed so fast I love a man good with his head and hard working with his hands ❤
“Bro I just pulled up to the park where you at I don’t see you anywhere”
Him : “oh I’m just under the ramp, doing weird stuff”
Crazy mechanic skills he’s done that 50xs at least it’s not easy at all
Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊
Bro just reinvented the wheel
HAhaha thanks broo!! 👊👊👊
I was about to say "OMFG WHY WOULD YOU DO THAT TO YOUR WHEELS😭" until i realized.
Smokin that good stuff 😂
You know that you could painted it the way it were without needing to cut the strings😅😅😅
Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!
@@T77BMX thanks for elucidating that my friend
This blew my mind, hella cool😅
I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life
The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂
Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊
Putting all the spokes in on the same side of the hub is crazy
Nice job homie😊❤
i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum
Haha yess!! thats what BMX is all about!!👊👊👊
Actually used the right tools. 😂
This was awesome , cool little short.
Man breaks wheel. Man rebuilds wheel. Viral video.
Mate no graffiti at the skate park 😂
🤣🤣🤣🤣 hahahaaa 👊
Looked like the right tools. Made easy work of it anyway.
Thank you so much bro!! Yes we almost had all the correct tools, It was just the Truing stand at the end to make the rim straight... 👊
Lacing wheels always pissed me off so bad lol
HAHAHA yeppp! its a pain in the A**! 🤣👊
Dominican Republic kids all day everyday i swear this is their specialty😂 Im Dominican myself.
A bike shop would’ve charged me $700 to do that.
God damn 😮
You're on the level if you're repairing stuff with the wrong tools.
Lol an so what the job was done perfectly
@@onelovejl8098 That was my point
People that don't have too much money are the most creative.
YES! Thanks broo 👊👊
Spray painting without a mask on is wild.....
Beautifully done sir
That unemployed friend on a tuesday
This is what your uncle who has 4 DUIs does during the day.
You Uncle.. Not mine 👊 haha
Wheel building and fixing buckles is very therapeutic
This guy gets high and cleans his bikes everyday
This short really spoke to me. 😩🥺
Hahahahaa!!! 🔥🔥
Great vid tho I subscribed the moment you started painting
Never been good at trueing, plus I lost my nipple twister.😂
My dad taught me this 20 years ago... i thought the art was lost 😅
Thats awesome!!! thats very kind of your dad to teach you bro!! its not easy and a very cool skill to have 👊👊👊
Didn’t know that shorts can be that long 😂
Cheers dude!
The people on this thread that don’t understand the skillllll it takes to true wheels with the right tools let alone none. This is impressive!
Now i want to hear a mash up of a track with the sound affects of this video
Hahaha no Way! that would be hella sick!!! 👊
Homie made that look easy. That shit is a pain in the ass
Good work man👍🏽
Thank you bro!! 🫡