Gəlib burda da Azərbaycanlı rəyi tapdıq 😅,amma deyəsən videonu hazırlayanda Azərbaycanlıdır çünki videodakı BakuKart idi,sadəcə olaraq video başlıqları İngilis dilində yazılıb )
Thanks for this. I’ve tried using 0.27 copper wire at 15 turns. It can detect but you need to get the ring touch the surface of the reader. I presume using a smaller wire gauge will allow for some distance
@@abeypaul4564You cannot use an expired card. Surely how it works. it's nfc Chip and this coil is the antenna the copper coil is wrapped inside a non-metallic ring and the two ends are welded to the chip You can cover it with resin after that You can use a metal ring, but an insulating layer must be applied (Ferrite Shield Sheet)
Əladı
You can soak the card in acetone to melt the plastic away and just leave the chip. Works quickly too.
Wow super daiy❤❤
Gəlib burda da Azərbaycanlı rəyi tapdıq 😅,amma deyəsən videonu hazırlayanda Azərbaycanlıdır çünki videodakı BakuKart idi,sadəcə olaraq video başlıqları İngilis dilində yazılıb )
@@nuruzade5083mən getdim düzəltməyə 😂
Thanks for this. I’ve tried using 0.27 copper wire at 15 turns. It can detect but you need to get the ring touch the surface of the reader. I presume using a smaller wire gauge will allow for some distance
Hi is the ring is working properly.
what is the ring material made of,it looks like liquid nails, am I right?
Granit glue
How many copper wire turns you gotta go?
How does it work? How do I set it up? Can I use an expired card and pay using such ring?
Same question ❓
@@abeypaul4564You cannot use an expired card. Surely how it works. it's nfc Chip and this coil is the antenna the copper coil is wrapped inside a non-metallic ring and the two ends are welded to the chip
You can cover it with resin after that
You can use a metal ring, but an insulating layer must be applied (Ferrite Shield Sheet)
Is this work
Absolutely