How to Install a Ethos Battery Backup System with Solar
Vložit
- čas přidán 27. 07. 2024
- Use the code NOWYOUKNOW to get 10% your purchase today at www.BigBattery.com
Kill A Watt Electricity Usage Meter:
www.amazon.com/P3-P4400-Elect...
SanTan Used Solar Panels:
www.santansolar.com/product-c...
Subscribe to Now Lets Review for More!
/ @nowletsreview6700
Now You Know's Website:
www.nowyouknowchannel.com
Our Patreon!
/ nowyouknow
00:00 - Intro
00:33 - Planning
07:09 - Explanation of our system
16:20 - Placement of system and wire connecting
22:35 - Sub-Panel Installation
24:45 - Connecting Inverter to the Grid
28:31 - Adding Solar to the System
31:52 - How’s it Working?
just to add my 2 cent, buying used panels have been great for me so far. cheap and they output the same rated power as if they were new, hot weather performance is great too. doesn't drop off much . its a cost effective way to go. if your starting out. just check them out for any cracks if possible before buying, that depends on your situation, i found someone locally so i was able to check them all out and pick the ones i wanted, i was told they used to power a Walgreen's for 8 years. now they serve me well!
I look forward to learning how you build your shed roof out of PV panels. I replaced my patio roof wit PV panels, but I still have gaps, so its not rainproof. Great idea and if your panels have airflow under them, they will be cooler and produce more😊
The breaker size should be at least 125% larger than the load. In other words the the load should not be more than 80% of the breaker rating. So in your case with a 50 amp load the breaker should be bigger than 62.5 amps. This would bring you to a 70 amp breaker. Then you would size the wire for 70 amps.
Yep
❤
This is EXACTLY what I was looking for !
ive got an EG4 6000XP and im loving it, it switches over to utility if i overload it, and never have to do anything to it. it just plain works. very happy with it. wish i could have afforded the 18K PV but ill probably go that route in the future, i built my batteries and used T class fuses for safety and BMS on each pack. the communications work with the inverter too, as it should.
and my DIY battery capacity is roughly 35 KWH
Thank You for All that you are doing for our Planet Earth.... Peace.. Shalom.. Salam.. Namaste
🙏🏻 😊 ✌ ☮ ❤
My Uncle might use this for the lodge he's building.
Nice install. The solar car port will be great.
I just bought a 2011 Nissan Leaf and found out that Albuquerque has an EV rate of $0.031 between 10:00 PM and 5:00 AM with a special program. That car may be worth much more now, if I charge this system at night and use batteries all day. Regular "Time-of-Day" rates are over $0.04 on off peak hours. The off peak hours are greater than the 7 hours of EV rate, but if I can get all I need in 7 hours, the EV rate is a huge benefit that I had not foreseen.
My new $1200, 30 mile range Leaf, is actually going to save me more than I could have imagined. Making it almost a free car that gives me cheap electric rates for my whole home. As long as it is registered to this address, I qualify for the EV rate.
excellent video guys …thanks 🙏
3:12 *Cries in $0.22/kWh "off-peak" prices*.
Wiring diagram and how to do video would be good
May I recommend something like the emporium vue to do a power audit on your whole house and different breakers like the big items. This can later be transferred to your sub panel that you install to monitor how much individual breakers are doing for certain items to go with your over all usage logs from the battery/solar and inverter logs.
Like to hear how your making the solar roof water proof ? I'm planning on using the poly-carbon corrugated panels under the solar.
PS buy the SunPower 400watt AC panels , you'll get 6K from 15 panels. Direct connect to your sub panel
Very interested in the solar roof project. I'd like to make a solar car port, DC coupled, for ev charging.
What was the inverter model and type that you used?
Thank you again for the awesome video!
Came with battery, go to website.
Hands down the Power Wall was easier to install, each power wall has a built in inverter and the gateway was simple to wire also.. I happen to install my own system, 3 power walls and gateway, with 19Kw worth of solar. SunPower panels. Please cover how the Cyber truck is going to back feed the house ? Does the CT require a Version 3 gateway to feed the house ?
Any thoughts of doing GAF Timerline Solar shingles?
I'm doing a net metered system with this inverter right now with 35 panels at 395 watts. No battery. Looking like all in its going to be about $17.5k to $18k ish..
New panels prices have dropped significantly in the last 6 months but will most likely go back up in the near future. What did you pay per panel?
@@balanwyt $117 ish per panel. New. Bought a pallet of 30 panels for $3495 added 5 extra for $602. Panels were actually the cheapest part of the system. The inverter and racking cost more then the panels do.
I'm getting ready to start a new home which will be facing south and probably will not be using any solar panels so, if I use this configuration for powering my air conditioner would I have any savings in power usage since the batteries are being charged by the grid? Or would this only serve as a backup power for the air conditioner during a power outage? By the way I will only have electric so the unit is also a heat pump for my winter heat.
Do you have any data on high humidity, fog and light rain effects the unit?
Didnt see anything mentioned here but can these batteries be charged by a gas generator in the event of a total power outage ?
What brand of crypto miners are those? I zoomed in but can’t read the logo. Also are you mining Bitcoin, or something else? I used to have Bitmain miners on a 240 circuit but never did much more than break even cuz I had no solar, was just using grid power
Does this system support rapid shut down?
Back feed breaker should be a 70 amp breaker not a 50. Should size cable for 70 amp also.
July ?
A quick search is showing the EG4 system is 30% cheaper, but does it interface with the house this easily?
I assume you mean the battery? I don't think the battery interfaces with the house at all. It interfaces with the inverter via the cat cable and the settings on the inverter. If my understanding is right their are several battery options that work with this inverter. This is inverter is actually sold as a kit of 14KW of Solar, EG4 18kpv inverter, with a EG4 14.3KWH battery on the Santan website. would still have to source a racking system for the solar though. I imagine they used that battery because they are working with big battery. They probably got the battery for free or are getting a % of the sales from people who use the 5% savings code. Also they mention in the video that big battery is a US company and they want to support them over the Chinese company.
We live in north Texas and in the spring, summer, and fall, it is not unusual to have thunderstorms come through and deliver hail stones as large as baseballs. So, my question is how do those solar panels hold up to being pelted with baseball sized balls of ice? Or larger?
There is a rating for panels being hail proof. Look it up if you need it.
UL 61730 or IEC 61730
And this quality for 30% Federal tax credit - correct ?
I have sub-panel already; and have 14 PV solar panels mounted (14 in 2 arrays); Tesla m3; no commute / work from home; StarLink dish. This sounds perfect. But rural area where Tesla solar & PW will not be coming.
One comment in prior video said “Inverter is noisy ?? - hope you will discuss that and potential inverter outside by panel.
Thanks so much
You make it seem easy...but I am still scared.
I would want a system where my EV coud be hooked to the Inverter and use the juice in the car as well.
If your EV has onboard ac power it might be able to go into the inverter on the generator hookups.
@@Alexdiaz727 Great idea for easily taking advantage of some cars with 120V CCS handle.
i did a 30kw battery and 3.5kw solar system.... for car charging and mining 😏😏
I was just recently watching a video by a CZcams channel called The Penny Wise Guys who built a solar pergola roof that is water tight. They use mounts on the top and bottom of the panels, and seal the sides, then use a gutter system at the seams where the top and bottom panels meet that doubles as the mounting rails... You can see here, they start describing the mounting system at about a minute thirty: czcams.com/video/Y37-Q0e_FbA/video.htmlsi=2aFBvCvGCqE35t9I
i ask why did you not get 6 x SPF 3000TL LVM-ES (growatt 3k) and just do a 3 inverters in each of the 2 phases or 6 on single phase or 2 per phase and do 3 phase system for a total cost of $3960 and got an extra 6kw of power for more offset for cheaper