Mercedes Benz SAM Replacement - Signal Acquisition Module w204

[@GetJobDoneofficial]

Guys Make Sure To Watch All The Way To End Credits Scene Where I Summarised This Fix For You!
And for Those Watching Without Subscribing - Shame On You - Click The Subscribe Button Right Now! @getjobdone

[@mohammedrahmanrahman5024]

yes mate your getting better with these tutorials. like how you get to the point and your fault finding and eliminating

[@GetJobDoneofficial]

Thanks mate! Glad You Liked It, Always Aiming To Show Tutorials That Are Super Important And Hard To Research!

[@Beardchanics]

90% of the job is get access to things on those modern cars! Great video as usual mate :)

[@GetJobDoneofficial]

Everything is hidden away, Mercedes is the master of hiding access of everything - they dont want to diy on them haha

[@Beardchanics]

@@GetJobDoneofficial If they charged less for doing it themselves they'll get less DIY than hiding stuff away lol

[@GetJobDoneofficial]

@@Beardchanics i never met Merc driver doing anything themselves either haha ..

[@Beardchanics]

@@GetJobDoneofficial hehe :D

[@ricar431]

Hello I have a 2010 c300 good alternator but not charging.does this box have a fuse for the alternator?

[@locati82]

GRACIAS!! HERMANO!!

[@santana095]

Thanks for this video, im gonna try

[@Sebastian-cp8bw]

I have a 2011 c300 4matic and got around corner from light going 50mph and lost power (complete power) my speedo still says 50mph i have no power at all i hook cables to thinking it was my battery and it archs yes its on right terminals...before i changed alt out due to lights diming and dieing battery tested was alt but this new problem is pointing to the SAM or the fuse box juction box how ever you say i just need to know how to take it apart i have it off but cant look inside i dont want to spend $150-$350 while in school and it not be that any suggestions ive also replaced my belt temp radiator hoses eis and esl cars not bad i dont mind taking time to fix

[@radomiriz]

Would a problem with the SAM show up on an OBD scan? I have a W204 and the alarm randomly goes off, I'm trying to diagnose the problem and a faulty SAM could be the problem. I don't have a 12V battery pack to test it.

[@mohammedrahmanrahman5024]

ha ha you summarised it so well the bastard lol

[@debrajohnson4689]

I have a 2008 Mercedes c300 sport that starts when I apply power to the starter fuse, but when I remove power from the fuse, the car dies. I also have no communication with my scanner using the ob2 port. I have tried to turn the key like the standard way to start the car, but I get no start, no crank any ideas?

[@ultimulapel7956]

Hi, I had an accident and my car doesn t start, I have the same problem as you, I changed just like you did, but it doesn t start, what should I do next, can you please help me?

[@alialhosni2456]

Any result so far?

[@ToysWithSami]

Bro you need to stick to the salvage thing. It’s a long term thing that will eventually work out. You just need exposure. Once someone watches you they will realise you have a nice personality and make good content. The salvage life is like a vlog life that people wanna keep up with. Little repairs are a go to reference if someone needs it. Think about it bro. I’m a Vauxhall specialist if you ever need anything. I’m also a salvager or 20years that knows a few bypasses I’d you need anything. Peace.

[@GetJobDoneofficial]

That is really nice of you, and very uplifting comment bro! I appreciate that and will take it on board. Being in Audis mostly, to get exposure through vlogs you need come out with RS or R8s, otherwise is not standing out. My service videos doing best for now, lets see what 2021 will bring have few ideas in mind that can change the entire course of the channel. Do you have your salvage channel too? I see your little man is into it too, my boy has one also : )

[@kravez16]

I have a issue, my centre console switch lights are not turning on nor do the switches work for the climate control, Im hoping it’s a blown fuse but I’m not yet sure, I had a mobile repair come check it with a OBD tool and he said it’s a ECU not communicating with the heating system and fan hence the loud fan. It’s all so confusing and frustrating. Any clue as to what the issue might be? This is on a w205 2017 c class coupe thank you.

[@GetJobDoneofficial]

Obd check should come back with more specific answers to which modules to swap does it need reprogramming swapping . .. rather then playing test and trials need proper obd checi

[@kravez16]

@@GetJobDoneofficial Well I took it to a certified Mercedes mechanic shop, they at first wasted 300£ of mine to tell me they needed to add new AC refrigerant because they had to take out my old refrigerant to test the new AC sensor. Still nothing got fixed now they said it’s. AC climate control module unit that has fried and needs replacement…

[@asldn9647]

Hi great video, I was wondering if you could help me?
I have a W205 c class key is turning and lights/radio are coming on but no start. The car was taken to a garage as my breakdown cover could not fix roadside and they are now saying they have detected a faulty rear sam module(£600-LDN) could this really be the problem? (I know the car starter relay was bridged in order to get the car to start on limp mode initially to get to the garage.)
Thanks in advance :)

[@GetJobDoneofficial]

Hi! We have had situation where c class would drive us places, worked fine and on way back to the car - no start. Although other things within car were working start was completely cut off. We would shake the Sam module and car eventually would start but only to drive me back home and again would dye again. I have swapped Sam module and starter motor wire that connects to Sam as well and fingers crossed has been a while now and is doing well. You can get used Sam but make sure to check all connection nibbles that they are not loose but fixed in place like they would be from new. All the best.

[@asldn9647]

@@GetJobDoneofficial Garage ended up fixing it and working perfect thanks for the help!

[@betoramos5501]

Please help I disconnected it and didn't mark the cables from underneath

[@jordanrobery9621]

I have a problem with headlight not working after being replaced could this be it?

[@GetJobDoneofficial]

With W204 headlight is another story for another whole episode. There is matter of ballast matching the light and being programmed at the same time.

[@ThegreatBoso]

I tried to remove mine but it was too hard

[@GetJobDoneofficial]

It's annoying job...not easy

[@A1Superdiagnostic]

That is not a good test. You can't just jumped power to ground just to verify a problem, if the circuit where good you would have ruined things as well