@@CarlosAlvarez-tr1yx That still doesn't really add up. Custom slides are super cheap these days, and so are triggers. You can get a Brownell's cut slide and an Apex trigger for $180 and $100 respectively (the two standards in aftermarket parts), and can go even cheaper for those components if you shop around.
$899? Umm... I'll just maybe shoot faster. That's really cool and all and looks like fun, but that on top of the $500 for a G17 making this $1399 is a tad much for a range toy handgun.
I talked to a lawyer about filing a lawsuit against Franklin Armory for "lost wages" because ever since I put their binary trigger in my Scorpion, my paycheck disappears buying ammo.
I am not as worried about the cost of the unit and parts, I am more concerned about the $1,000's of dollars of ammunition I would be blowing through...
I'd just be concerned about the idiots who would cause it to get outlawed 5 minutes after release. 15 seconds and 3 accidents in - they'll be off the market again
As cool as that is, no way am I dropping 900 on a trigger. part of me wants to give them the benefit of the doubt, but another part of me says they're upcharging this way too much.
@@Loyal69 such a hilarious joke. You won’t be anywhere near a g18 fire rate with any trigger. This is a trigger that cost double what most people purchased their actual Glock for. Spend that money on ammo and range time and get fast without a ridiculous price “trigger kit” “Be quiet in the back”
@@wheezzl Even the best optic ready slides are around 250, and those are made well, franklin isn't known for quality rifles, more like range gimmicks. So you're paying almost 800 after taxes for the trigger itself. Not a great deal
I'd like to see how fast Jerry Miculek can get one of these to run. my guess 1400rpm neighborhood. Franklin armory should send him one just for the promotional potential alone.
It sounded a little short to me also. I re-watched it 5 times at 0.25 speed. I counted 21 shots twice, 23 shots twice and 25 shots once. That said, it was clearly short of 33 rounds. I would love to hear their excuse for not filling the magazine to capacity. If ever there was a reason to have a full 33 round mag, this would have been it.
@@PH_INFO_101 same excuse given in the past 5 shot show media events, "ammo cost and availability". Last media day the were given folks 5-6 rounds a mag sometimes.
Dude looked super excited to say his new product is $900. It also looks a lot like the G18, not super unique or whatever he said . I’m sure it’s fun, and it is a slide and trigger for $899 but still.
He said "iconic" design or look or something. He was saying it looks like a g18 without saying it looks like a g18. They don't want a lawsuit from glock.
I am not as worried about the cost of the unit and parts, I am more concerned about the $1,000's of dollars of ammunition I would be blowing through...
“This is the cool part and everyone is going to like this. The only way to buy this slide is to force you to buy our trigger as well and we’re not going easy on you either you’re paying full price for both”
@@xXBoredomeXx so that it's cheaper. Like saying if you want to buy tires only, that you're also required to purchase brand new windows for all sides despite you only needing to replace your tires.
I see everyone saying it's to much but when u buy a custom slide for like $400-$900 and a after market trigger for $100-$280. I think this is a good price for what we are getting
@@jasonb4350 the price is a combination of trigger and slide, he said in the video that they come together in the same package so they probably are both required for it to function properly.
@@greatgallade I bought a G19 slide with a RMR cut and lightening cuts for $180. An Apex trigger is only $100, and is basically the standard for aftermarket triggers.
This is nonsense. It's not about getting more rounds down range as quickly as possible it's about trigger reset and shooting in cadence with muzzle flip to get A-zone hits. Any actual shooter will have no interest in a product like this.
The (ridiculous) price aside, rather than going Super Fudd and emptying the mag, it would have vastly better to measure bursts on paper _to show the patterning_ Nothing sells the value like _repeatable_ tight pairs of bullet holes...this trigger is for (IMO) taking down goblins in record time, not exploding five lb. cans of nacho cheese.
My gen 3 G19 shot binary style after I put a Double Diamond connector in it, I blamed the connector until I took the gun apart and noticed the safety plunger spring was not in it's hole in the slide correctly, it was sort of bent over sideways, but popped out before I could get a good look. After putting it in right, and going back to the factory connector it shot fine. kinda weird, but decided not to experiment. Anyone else have this happen?
Had a ghost connector in a g23 that was causing it to fire on reset, it wasn't the edge connector, can't remember the name but the one with 2 oblong slots. Put the stock connector back in and solved the problem. Gets your attention when your not expecting it.
Bro! At this point we are getting close to Full Auto being a realization for everybody. It's pretty damn close For Way Less Money. Seems like a Win-Win for to me.
@@johnandrews9433 True. We Are Powerless to stop it. We Keep saying we are fighting against this type of stuff but in reality. We are losing. I think its only because ppl dont care that much about Bump Stocks or FRTs But, Maybe when they actually say Semi-Auto Rifles are Banned then ppl will Jump up and come together and stop this BS From happening.
Everyone saying the price is high, I agree. However you can sell the OEM slide for easy 200ish makes it a little more fair IMO. But this is for sure a toy and nothing more.
@@ColburnFreml When I was on the (Army) range preparing for deployment, I soon realized that I could squeeze the trigger faster than the 3-round burst (M16A2) could go through the 'cycle.' So I was content with semi-auto.
It's prices like these that make me wish I knew more about gun manufacturing. Because there HAS to be a good reason they'd end up having to charge this much and i don't have a clue what it is.
If it was cheap it would probably be used by a lot of gangbangers, which would result in all binaries getting banned and ruining the fun for all the binaries for long guns (which criminals don’t typically use)
LET me refine the question, if you are in binary mode and you you pull the trigger and fire the first shot but then dont want to release the trigger and fire the 2nd round ?
Ain’t no fucking way I’d pay $900 for that. That slide better be the coolest looking Gucci Glock slide I’ve ever seen and same for the trigger for that price… you can get a nice trigger for $100 and a nice optic cut slide for $200, there’s no way the binary function by itself cost $600.
These will be for 9mm frame glock's. If it's gen 5 then it'll be 9mm only. If it's gen 3 or 4 then there's a possibility it'll be 9/40/357 compatible. No chance it's 45 or 10mm compatible
@@freedomisntfree131you misinterpreted my comment as condescending i was just being blunt. they can barely get a 9mm to market 10mm is slim to zero chance
@@rmblwgn Fair enough. I don't expect them to have it soon. But, look at what this company is doing. They don't appear to want to limit themselves. I've already got one for my ar pistol and my 10-22. I'm definitely going to get one for my ak and my g19. Awesome product's.
I think most people forgot that you can get a Gucci Glock for just the price of this slide/trigger. Too expensive and I bet it won’t sell as well as they hope. And binary isn’t very cool. Forced reset is the way of the future.
@@tangomantactical Rare breed released a video of their 3-position trigger. There's no justifying turning a G17 into a nearly unusable ammo burner when a 3 position FRT is about to come out for likely sub-$400.
It hurt spending $500 for AR binaries, but I don’t think I could justify $900. It’s super cool though.
Gets a pre cut slide for mro’s and a trigger as well, adds up to about what you’d pay separately plus the new binary aspect
Glock lowers are free so if it comes with the slide and trigger then you really can't go wrong.
Or just get a 3d printer
It may be worth it for a new build but I definitely wouldn't pay it to upgrade an existing set up.
@@CarlosAlvarez-tr1yx That still doesn't really add up. Custom slides are super cheap these days, and so are triggers. You can get a Brownell's cut slide and an Apex trigger for $180 and $100 respectively (the two standards in aftermarket parts), and can go even cheaper for those components if you shop around.
People that can't even handle normal 9mm recoil are going to eat this up, just like the gun range ceiling.
Old ladies?
@@robertg.durant8489 If you only knew. I've seen skellingtons lose their grips on Beretta 92's.
@Devin Reavis I suppose the answer is terrible form
Like barely holding onto the damn thing
🤣 🤣
🤣
Wait until the ATF calls it an automatic
Oh you just wait
The ATF needs disbanded.
Pretty sure Franklin goes through the atf every time
Sometimes I wish our founding fathers never created the ATF back in 1775 🤔
About as useless as one.
Product comes in Q2 and the AFT comes for it in Q3.
Nah they will wait at least a year to make sure they are able to screw over as many law abiding citizens as possible.
@@69JuggaloMan69 Yup tyrannical aholes are so predictable.
my thoughts. AFT ;)
This
@@clarkrichards1907
You just want your brand of tyranny
$899? Umm... I'll just maybe shoot faster. That's really cool and all and looks like fun, but that on top of the $500 for a G17 making this $1399 is a tad much for a range toy handgun.
Yeah, then add a red dot on top of that, and you're at about Two grand.
I’ll just get one glock for each hand.
A 3d printed switch thingy? $1
for that much you could buy another glock and shoot em both at the same time
Or just do a p80 frame for $100….
I talked to a lawyer about filing a lawsuit against Franklin Armory for "lost wages" because ever since I put their binary trigger in my Scorpion, my paycheck disappears buying ammo.
I am not as worried about the cost of the unit and parts, I am more concerned about the $1,000's of dollars of ammunition I would be blowing through...
Exactly why I stopped shooting ar binary
I want to see a forced reset pistol trigger idea
Coming Soon
1200 dollars easy
Don't give them ideas on what to charge
I'd just be concerned about the idiots who would cause it to get outlawed 5 minutes after release. 15 seconds and 3 accidents in - they'll be off the market again
@@Satchel456
The coat hangers were much simpler
As cool as that is, no way am I dropping 900 on a trigger. part of me wants to give them the benefit of the doubt, but another part of me says they're upcharging this way too much.
You're not though, you're dropping 900 on a trigger and an optic ready slide.
What's the price of a glcok 18? Oh yeah you CANT get one. Lol be quiet in the back
@@Loyal69 such a hilarious joke. You won’t be anywhere near a g18 fire rate with any trigger. This is a trigger that cost double what most people purchased their actual Glock for. Spend that money on ammo and range time and get fast without a ridiculous price “trigger kit”
“Be quiet in the back”
@@wheezzl Even the best optic ready slides are around 250, and those are made well, franklin isn't known for quality rifles, more like range gimmicks. So you're paying almost 800 after taxes for the trigger itself. Not a great deal
@@mynameisjeff6988 ...uh the cheapest optic ready slides are $200 to $250. The best/nicest optics slides are $400 to $600.
I'd like to see how fast Jerry Miculek can get one of these to run. my guess 1400rpm neighborhood. Franklin armory should send him one just for the promotional potential alone.
He can shoot faster than this.
900 for a gimmick part? As cool as it would be to relive my Siphon Filter G18 childhood dream days I could never justify this purchase.
Great throwback. I was literally just trying to remember the game where I could catch guys on fire with the taser lol
What's the use of a 33rd stick that's not loaded with 33 rounds?
Ik he said it was a full stick but i only counted 20
Yeah, dudes super sketch. Do you think he glows?
@@alharrison1038 ☢️☢️☢️☢️
It sounded a little short to me also. I re-watched it 5 times at 0.25 speed. I counted 21 shots twice, 23 shots twice and 25 shots once. That said, it was clearly short of 33 rounds. I would love to hear their excuse for not filling the magazine to capacity. If ever there was a reason to have a full 33 round mag, this would have been it.
@@PH_INFO_101 same excuse given in the past 5 shot show media events, "ammo cost and availability". Last media day the were given folks 5-6 rounds a mag sometimes.
Dude looked super excited to say his new product is $900. It also looks a lot like the G18, not super unique or whatever he said . I’m sure it’s fun, and it is a slide and trigger for $899 but still.
It does come with a slide too though
He said "iconic" design or look or something. He was saying it looks like a g18 without saying it looks like a g18. They don't want a lawsuit from glock.
I am not as worried about the cost of the unit and parts, I am more concerned about the $1,000's of dollars of ammunition I would be blowing through...
G18s are pretty unique I would say lol
If you have never tried a binary you are missing out
As soon as I saw 899 in the top comment I don't care how cool it is. That price point is definitely not thinking about the average shooter.
“This is the cool part and everyone is going to like this. The only way to buy this slide is to force you to buy our trigger as well and we’re not going easy on you either you’re paying full price for both”
Precisely what I heard as well 😂
Glock is an abusive company to customers
Why would you want one without the other?
@@xXBoredomeXx so that it's cheaper. Like saying if you want to buy tires only, that you're also required to purchase brand new windows for all sides despite you only needing to replace your tires.
They got to pay for the R&D. They invent it, they set the price. No has to buy it at that price or any other.
Possible typo "Shot show 2020" coz it says published 59mins ago
I see everyone saying it's to much but when u buy a custom slide for like $400-$900 and a after market trigger for $100-$280. I think this is a good price for what we are getting
No one buys a 900 slide unless it's a gun.
They should offer just the slide! Unless the trigger is special and they need to work together but no matter how you look at it the price is crazy .
@@greatgallade you would be surprised on how many people will buy a $900 slide
@@jasonb4350 the price is a combination of trigger and slide, he said in the video that they come together in the same package so they probably are both required for it to function properly.
@@greatgallade I bought a G19 slide with a RMR cut and lightening cuts for $180. An Apex trigger is only $100, and is basically the standard for aftermarket triggers.
Now I am impressed with Franklin Armory, to com up with a Striker fired Binary trigger I would love to see the inner workings of that
These people must be getting huge kick backs from the ammunition companys
LoL 😂
Amen, hallelujah praise Jesus!!! Finally the truth is spoken. I didn't use Jesus's name in vain either...for the record.
_Ikr_
Where is everyone else, this is the first SHOT SHOW video and probably the best product. I would love to get one!
Ok sweetheart;)
Nah Holosun took the cake with their micro 509ts, that's gamechanging stuff right there.
@@boygonewhoopdataZZ where's that?
Why's the title say 2020?
@@boygonewhoopdataZZ holy shit. Just saw it. Hurry up and take my money. Holosun is literally killing every optic manufacturer out of existence.
I remember emailing franklin armory about binary glock triggers years ago, happy to finally see them here!
Prosecutors will have a field day with this one
Nobody:
Franklin: "binary Glock!!!!"
Cool! Another way to burn through expensive ammo with an expensive firearm upgrade. What do you think, a cyclic rate of $200/minute?
This is nonsense. It's not about getting more rounds down range as quickly as possible it's about trigger reset and shooting in cadence with muzzle flip to get A-zone hits. Any actual shooter will have no interest in a product like this.
Exactly _its a crap toy for blokes who have scarface posters in a frame imo_ don't get the hype
Exactly, imagine a panicked victim missing all those shots while the criminal hides behind an engine block then hears click 😄 🤣
It's specifically designed to generate backyard negligent discharge videos.
The (ridiculous) price aside, rather than going Super Fudd and emptying the mag, it would have vastly better to measure bursts on paper _to show the patterning_
Nothing sells the value like _repeatable_ tight pairs of bullet holes...this trigger is for (IMO) taking down goblins in record time, not exploding five lb. cans of nacho cheese.
I would also have liked to see how well it could actually pattern.
I like how he wasn’t agreeing with that switch word😂😂
You have the title 2020… it’s 2022
Shh; we’re all trying to forget the last couple years.
Omg, dude. Are you from the future?
My gen 3 G19 shot binary style after I put a Double Diamond connector in it, I blamed the connector until I took the gun apart and noticed the safety plunger spring was not in it's hole in the slide correctly, it was sort of bent over sideways, but popped out before I could get a good look. After putting it in right, and going back to the factory connector it shot fine. kinda weird, but decided not to experiment. Anyone else have this happen?
Had a ghost connector in a g23 that was causing it to fire on reset, it wasn't the edge connector, can't remember the name but the one with 2 oblong slots. Put the stock connector back in and solved the problem. Gets your attention when your not expecting it.
900 bucks that slide better look better
I’d definitely get one if I knew for a fact the ATF wouldn’t ban them 😪
Yes it's not IF but when.
Like sponge bob I need it 🤣😭🤦🏾♂️
Bro! At this point we are getting close to Full Auto being a realization for everybody. It's pretty damn close For Way Less Money. Seems like a Win-Win for to me.
That pesky NFA is the hold up
Until ATF moves the goalpost and decided binaries are machine guns like they did with FRT and WOT
@@johnandrews9433 True. We Are Powerless to stop it. We Keep saying we are fighting against this type of stuff but in reality. We are losing. I think its only because ppl dont care that much about Bump Stocks or FRTs But, Maybe when they actually say Semi-Auto Rifles are Banned then ppl will Jump up and come together and stop this BS From happening.
Killed that 33 rd magazine in 2 seconds!
“ Can I Dry Fire it Once? “
“ Yeah Go Ahead “
Continues to Dry Fire it like 5 times..🤦🏻♂️🤷🏻♂️😂
*range ceiling tiles shaking in fear nationwide*
Getting this asap lol love it. Does anyone know if this binary trigger/slide will work with the CAA MCK 2.0
Cuz that Gona be sick if so
AFT: You had our curiosity. Now you have our attention.
does it take Glock mags though?
Bx-25s only unfortunately
It's literally a glock. What other mag would it take?
@@robertf6523 it's a meme you fudd
@@robertf6523 what about them extendo assault clips that hold 33 bullets? I got me bunches of them. Work in this Glock?
Damn that’s pretty cool. Would love to see that in a B&T chassis
Everyone saying the price is high, I agree. However you can sell the OEM slide for easy 200ish makes it a little more fair IMO. But this is for sure a toy and nothing more.
just a moment for how sick this rep is
This is the only reason I’d buy a Glock
Since I saw before I started that the TRIGGER is $899, saved me the trouble of watching it. $900 for a trigger. 😂😂🤦🏼♂️
Very cool, but it’s very slow. You have to fully depress and release the trigger.
Chicago and la gangs are gonna love these
I'll stick to a $150 trigger and get better results because I actually grouped with mine.
"I'm not sure what to do with my hands..."
Totally awesome……must have it!
A very expensive toy on an AR15. This is even a more expensive toy that will sell out quickly.
Fab Defense COBRA Glock Stocks are #1 in the industry..!!
I think the binary trigger would be a great replacement for 3-round burst of the M4 carbine.
I disagree for all Marines. Imo. Semper Fi - DD
No, they would be better off with Full auto or, if they wanted, a 2 round burst.
@@ColburnFreml When I was on the (Army) range preparing for deployment, I soon realized that I could squeeze the trigger faster than the 3-round burst (M16A2) could go through the 'cycle.' So I was content with semi-auto.
@@elphi4321 when I was with the Seabees and I got an M16A3, I wondered how the Army and Marines screwed up such a simple concept.
@@ColburnFreml No idea. Started with (USMC) the M16A1 in '78, issued the A2 in '84. Retired (USA) with the A2 in '11.
Geez, $900, I will wait for the reversed engineered one. I bet it can be 3d printed, hence why they didnt actually show the part.
Forced reset is vastly superior
Did he say 899 for it🙄💀
That’s what it sounded like to me too
Outrageous may as well by something else or better yet ammo and mags and speed up your shooting/trigger skills.
Can't wait to see MilspecMojo test this trigger.
ATF when he said switch 👀😭
Imagine this as an EDC 🤤
Glock go Brrrrrrrrrrrrt
My thoughts exactly!!!
😂your defense attorney will hate you and the prosecutor will love you😊
Meanwhile I haven't seen 9mm target ammo at the store in 2 years
Finally, a reason to own a damn Glock! (Well, until they make one for M&Ps anyway!)
The "hood" is gonna love this one
It’s expensive, but if I could afford it I’d indulge.
Do we need a proprietary pistol frame as well or can we use after marker frames like the shadow systems DR920?
Super fun concept!
I didn’t know Colby Covington worked for Franklin armory
I wondered when FA would come out with a "pseudo giggle trigger" for the Glock. Kind of hope it comes in Gen 3, 4 and 5.👍
If you can spend $899 for a slide and trigger. You shouldn’t have any problems buying a gen 5
I think the 1st release is for gen3
It's prices like these that make me wish I knew more about gun manufacturing. Because there HAS to be a good reason they'd end up having to charge this much and i don't have a clue what it is.
If it was cheap it would probably be used by a lot of gangbangers, which would result in all binaries getting banned and ruining the fun for all the binaries for long guns (which criminals don’t typically use)
Make as much money as possible; it can be shutdown at any time by the ATF, and taking them to court usually costs butt loads of cash.
There is a cheap way. You just need to do some research. At least that’s what I’ve heard. From a friend. Who was asking.
answer, legal litigation, for the atf. we all know its coming,
LET me refine the question, if you are in binary mode and you you pull the trigger and fire the first shot but then dont want to release the trigger and fire the 2nd round ?
You're stuck holding a pistol that's ready to fire.
Sir drop the weapon.
I can't.
Drop it
I can't
Was this from 2020 and I just missed it and this is a reupload because of shot show timing?
I can't believe this is the ONLY channel (I've seen) covering this! Just subbed - thank you!
This is about the 3rd I've seen...if it weren't for these Shotshow videos who would know...
I'm sure we'll be 3D printing them in no time
Ummm there’s no way in hell “that was a full stick” LOL 33 rounds is full and that was 10-14 rounds max
Finally some real innovation for Glock LOL
this thing will be an ND machine
Longslide please!!!!!! Until then I'll take 2 coz my wife would like one too!
Ballin’ outa control over there🤣🤑💸💸💸
Anything binary looks foolish in comparison to the FRT or WOT…for that price point it’s a hard pass…
Except FRTs are hammer fired systems. We don’t yet know if you can make one for a striker fired system
@@DireAvenger001 Obviously, my point is that binary in general is goofy.
there's no practical use for binary triggers but you do you
At least it has a selector so its optional
Just poking the left
Cry more
@@nonyabidness6492 ?
“You do you”
What’s Masturbation got to do with this?
_Just in time for the Ammo hike_
The slide is involved with the trigger and thats why the cost is what it is.
Is the factory spring good enough or do you need a Heavier weight
Their prime market in chicago bout to blow up
Ain’t no fucking way I’d pay $900 for that. That slide better be the coolest looking Gucci Glock slide I’ve ever seen and same for the trigger for that price… you can get a nice trigger for $100 and a nice optic cut slide for $200, there’s no way the binary function by itself cost $600.
$900 is about double what it should cost. i'll check back when they realize market value is closer to $500 than $1K
“Can I dry fire this once?”, “sure”, goes on to dry fire 4 times.
Perfect for special olympics shooting team.
Is it available for all caliber glocks? Because I have a G29 I wouldn't mind this on.
That was just all kinds of cool
Ill wait for the FRT trigger. Cant wait
I just bought a timney Glock trigger.
I've been gathering what I need to build my Glock 20. I'm glad I haven't been able to find a slide for it now.
They are definitely not going to have a Glock 20 slide
These will be for 9mm frame glock's. If it's gen 5 then it'll be 9mm only. If it's gen 3 or 4 then there's a possibility it'll be 9/40/357 compatible. No chance it's 45 or 10mm compatible
@@rmblwgn I'm so glad you speak for the company. You are so insightful with facts and no condescending opinions.
@@freedomisntfree131you misinterpreted my comment as condescending i was just being blunt. they can barely get a 9mm to market 10mm is slim to zero chance
@@rmblwgn Fair enough. I don't expect them to have it soon. But, look at what this company is doing. They don't appear to want to limit themselves. I've already got one for my ar pistol and my 10-22. I'm definitely going to get one for my ak and my g19. Awesome product's.
This was in Vegas right?
Will it be offered with the 10mm slide?
Can we send our slides in for modification?
New subscriber. Very cool look at something I didn’t know I needed.
I will never financially recover from this😂
Yes, but no, just no. The price, just no.
Binary is the Rich trigger
this begs to be sequel to the rare breed saga lol
I put an apex angel 3.0 connector into my glock gen5 and got the same result only cheaper.
That's all you put in?
What Gen does it fit on? If 1-3 I can see the poly80 builders willing to spend the $900.
I think most people forgot that you can get a Gucci Glock for just the price of this slide/trigger. Too expensive and I bet it won’t sell as well as they hope. And binary isn’t very cool. Forced reset is the way of the future.
Not until select 3rd position FRT'S are available to buy. I have binaries and FRT'S. Select fire is always superior. Imho.
@@tangomantactical Rare breed released a video of their 3-position trigger. There's no justifying turning a G17 into a nearly unusable ammo burner when a 3 position FRT is about to come out for likely sub-$400.