Building My Dream Welding Table! DIY
Vložit
- čas přidán 27. 01. 2024
- Dream welding table build! #welding #weldingtable #hobart #evolution #evolutionsaw
Below are affiliate links
My big Evolution saw: amzn.to/4bubq89
Evolution circular saw: amzn.to/3UDAVOj
Receive hitch tubes: amzn.to/42Ae2NN
Heavy duty caster wheels: amzn.to/3OEjbOX
Our new merchandise: the-kelleys-country-life.mysh...
New review channel: / @thekelleysreviews
Our Patreon / tkcl
New podcast channel: / @thekelleysoffscript
This is our Amazon store with affiliate links to the products we use on the channel. It doesn't cost you anymore and it helps support the channel, THANKS!
amzn.to/3RO2z8n
View our other channel for outdoor related content such as fishing, boating and hunting! / @tkoutdoors
Paypal is the same email address below
For business inquires please contact us at kelleyscountry@gmail.com
The Kelley's Country Life LLC accepts no responsibility for you trying anything you see on our channel.
All links provided above may be affiliate links which earn us a small commission but don't cost you any extra.
I am a part 107 certified drone operator, any drone imagery you see is legal and my own.
Our address
6244 East Caps
PO Box 22
Lamont, FL 32336
dude, this is amazing! I cant wait to have a project like this.
Built the exact same table a few years back. It transformed my shop into an amazing place to work
Well thought out!
Thanks for the inspiration! I’ve been picking up ideas from here and there but this one takes the cake…now I know how I want to put my table together.
Glad you enjoyed it
Awesome table. You did a great job.
Metal working table and lunch table all in one. Awesome
Lots of great ideas and techniques. Thanks for sharing.
Thanks for watching!
Well done
Great job Andrew. You really thought this one out. Not only is it a killer design, you cleared up some space in your shop with the extra storage space. You will now know exactly where your welding supplies and tools are in that beast. Awesome content once again!!!!!
That's exactly right, and I also have a big Shop clean out and storage solution planned. That'll be a future video to get a lot more of my working room back and get more organized.
What a great table
really appreciatable, awesome feature aa according to the needs of welders.
This is incredible and so very much You Andrew!
Thank you
Very well thought out and tons of great features!
Thank you for watching
OK - I have been watching you for awhile - and have always been impressed by your mechanical skills and the way you think through projects - but this is a WHOLE other level! Great job!
Thank you for watching and the support
A lot of thought went into this build. Looks like many years of enjoyable use!
I sure hope so
Dang bro! U thought of everything. Been watching a lot of table builds for ideas. This one is the best. Gonna use a lot of these features. Thanks!
Thank you for watching, glad it was helpful. More add ons coming!
Awesome….just awesome…..another great project! Thank you for sharing! Happy Birthday!!!🎉
Thanks so much! 😊
Awesome!! Thanks for sharing.. saved to my library for future
Thank you for watching
I don’t know, it looks pretty flimsy…..😂. All kidding aside I think it turned out great! I’ll be stealing some of these ideas if I ever get around to building my own.
What a pleasure to watch your expertiese, like it. outstanding work.
Thank you for watching
Great Build :) Thanks!
Glad you like it!
Andrew Happy Birthday! Awesome welding table you’ll get lots of use out of it. Add more seats and you will have a picnic table.
Thank you sir
You did a great job. Nice ideas. I really appreciate the round seat. Sometimes we need time to think or just rest.
Thank you for watching!
I built one a few years back like that. Very nice to have. Two things i did different was I used 2' pipe on the seat so it swivels from side to side and then under the table for those jobs its in the way and then second I wired the whole table with plugs on every corner. Then all you have to do is plug a fixed cord that made into a junction box on the table and then everything has power. Love your work and the details are awesome.
Thanks
Brilliant ideas watching your video gave me a solution for my table. Nicely done.
Glad it helped
What an AMAZING work n idea dude.. Thanks for sharing!
Thank you for watching
Happy birthday to you! I really enjoyed watching you build this table, very, very nice!
Thank you very much!
Looks great!
Thanks
Wow! Great job!
Thank you!
That's a awesome table!!! You did a great job!!!!
Thank you very much
Fantastic video. Great ideas. Thanks for sharing
Thanks for watching!
Dude that is a seriously awesome table you built. I love the awesome slider bar idea for the grinding consumables. Excellent job man and God bless y'all
Thanks a bunch! God bless
🎂HAPPY BIRTHDAY🎂....that's one helluva birthday present you built yourself! I love the addons and the versatility, not to mention freeing up valuable work or storage space in the shop. Excellent job as always "young man"!👍👍👍👍
Thank you so much 🤗
Dude, excellent work, really cool design, great craftsmanship too. Looking forward to seeing how this progresses and the projects you build off of it. Appreciate ya sharing 👍
Thank you, new project video drops today.
What a great build! Cant wait to get started on mine.
Thank you for watching
Thanks for recording this project
Thank you for watching
That’s an awesome table!!! I love it!!! I need to build one myself!!
Thanks, I love it!
Love the thought process! Looks great! 💪
Thank you
Great Design. All the Best using it.
Thank you
Tons of utility thought out on your new welding table, Andrew. I wouldn't have imagined any less. I'm excited to see it in use soon!
Thank you sir! It's going to be a blessing.
I loved the solutions you find.
Thank you for watching
Wow! Nice work!!
Thanks!
Nice job on the Welding table Andrew. That’s something you will get a lot of use out of. Looks really good and solid. 👍👍❤️❤️🇨🇦
Thanks 👍
Very impressive indeed !!!!
Thank you for watching
Happy Birthday Andrew. Awesome table
Thank you
Fantastic tabke, Nice job!
Thank you
Excellent job Andrew!!
You have created a masterpiece of a welding table!! The features on this just blow me away!!
Strong work Brother!
Happy 20/20 Birthday!!
Thank you very much!
Nice work. Looks well thought out.
Thanks!
Awesome welding table. That will really come in handy for you 😊
Definitely!
Great idea
Thank you! 😊
Wow, what the exelent
Very nice table I'd liked too much
On the 4in extension, I'd cut a slot hole. Bolt them together just slightly loose. Should give enough L-R slop to enable you to pull it out as one piece again
Nice table and well thought out.
Thank you
Boss table man! I really like all the square tube cross braces to keep the deck flat. Clearly well thought out. I weld and fab for fun so I understand how bad ass this thing is. Keep on trucking.
Thank you
Awesome table!
Thanks
Good job. Some great features there. 👍
Thanks
Excellent design
Glad you like it
Nicely done!
Thanks!
great work
Thanks!
May have to copy this! Thanks for the video
Go for it!
Excellent job
Thank you very much!
NICE JOB 👍👍
Thank you
Impressive well thought out design!! Again, ...great job!! 🙂
Thank you very much!
Really like your design.
Thank you!
Great table Andrew! Nicely done!
Thanks!
Very well thought out welding table design, I really like some of the features that I have seen on other CZcamsr videos. Great job, I can see you will put this table to good use.
Thank you very much!
Lordy Lordy Look Who's Forty!! Lol Happy Birthday Young Man!!🎉🎉 I sure like that wielding table, Great workmanship.
Thanks!
Just want to add my sentiment of such an awesome welding table.
Thank you so much
That Vevor magnetic drill seems to work very well! Great table build btw absolutely love the design good job!
Thank you very much!
Very nice.
Thank you
Very nice table.
Thank you!
Good work
Thanks
Awesome table Andrew!🎉 And happy birthday!
Thanks so much!
Nice table! The only thing I would add is angle iron on the edge of one side of the table to hold round stock when welding!
Nice 👍
Really well thought out and built table Andrew! As a welder/ fabricator for the last 46 years I know exactly what you mean about workjng off of the floor, my knees are both shot! I especially like that you didn't permanently mount your bench grinder and vice to the table, I've always said that that's the best way to ruin a perfectly good welding table!
Thank you for watching and the feedback
Very nice job. I did a few things a bit differently, but your table has some very cool features. I started with seats like you made, but found them to be knee busters, so I converted them to swing away style on pintles. I really like your table extension. Well done, sir!
Right on
Awesome table
Thanks!
Top ótimo trabalho 😮😮
Love it…!! That’s Mericaaaa Ingenuity
awesome table
Thanks!
Nice! When I made mine I welded scrap 1.5 inch tubing to legs to hold my welding torch, plasma torch etc. also at the end I welded in a grate for plasma cutting. It has a tray underneath to catch debris.
Going to build a few more of these things, I especially want a spark shield on the slide out when cutting.
Very nice work!
Thank you
13:20 VERY good idea. So simple and I never thought of it before.
Thank you for watching
muy buen trabajo
Thinkerer, Tinkerer, and fabricator of awesome stuff!! I'd like to order two, please. ASAP! Lol. And Happy Birthday!! Ray
Deal! Thanks
happy birthday and i’m jealous of the table!
Thank you for watching
Отличный слесарный стол получился. Респект Мастеру.
Sure is an awesome table Andrew. I thought about adding a sheet metal top to my workbench but it is expensive like you said
You’re going to have to eventually get a Fireball Hardtail Vice to go on that awesome welding table. That is fantastic table you have built. Love the extension fence.
That would be cool! I need some of their squares as well.
Thought out and well done sir!
Thank you for watching!
Thanks for watching
Great table! Glad to see you have the evolution saw. I go crazy watching guys use angle grinders and hack saws to build stuff. Well done sir.
Just bought that saw and absolutely love it.
@@TKCL yes for the money it can’t be beat! I’m an old toolmaker for like 50 years. Owned my own shop for 48 of them lol. I had an expensive cold saw and we cut many a piece to tight tolerances and good finishes. This isn’t quite as accurate ( nor expensive 😜)but for fab work it’s fantastic. Here’s a little tip you may find helpful. I mounted a rod of steel to the right hand side for a stop. I made a block that you could rotate down when using. Put an Allen head SHCS in for fine adjustment. Then I use a small piece of one inch tube when setting to make a space in between. Then I remove it allowing room for the piece to fall off without pinching. Hope you find that useful. You made a great table utilizing all that space. I’m curious are you planing on renting a mag drill and putting in .625 holes for clamps? I made mine using 6 in wide plates with 1 inch spacer plates. I can remove and put clamps in that reach every spot easily. My plates have an adjustable mounting so I can tweak them in for flatness to each other. I would have liked to get the plates Blanchard ground but there’s no place anywhere close to me. But I’m simply a hobby shop in my retirement anyway. Sorry I get so lengthy 😂 I’m also a novelist.
良い仕上がり👌👍‼️😊
Drill 3/4 holes in the top so you can use the Fireball Tool Fixtures.
I just recycled on old frame that was in an oil field yard, think it was used for some sort of storage, it’s a 3’x5’ frame built out of 2 3/8s drill stem, I’m planning on putting a 3/8” plate on top, I’m trying to come up with a way of putting my chest type tool box that’s about 2’ tall at the bottom but make some sort of slide out to be able to keep it out of the way, was thinking of bolting some angle iron on it and welding some c-channel to the frame to be able to let it slide in and out
Happy Birthday! I hope Tiffany cooks you up something special. 🎉
Thank you!!
That is some table mate, fantastic work. I was looking forward to you trying to pick it up when it was upside down! Mines almost identical, the only thing different was I made the seat swing out so I could kick it underneath in a hurry!
Thank you for watching
Very nice. Like the disc storage. Haven’t seen that solution. Smart.
Having been there, done that, I highly recommend putting a 6 socket power strip on the table with a very short cord. I often have 3 of my 4” side grinders in use on the same project. I placed it on the side of my domain hand. Then use cord reel to power.
Another new feature I did was add the 5/8 fixture holes in a 36”x36” area. So much better being able to clamp anywhere. The last bench I relied on the edge which worked but always needed to clamp perpendicular also.
Power strip is a good idea! Thanks
Happy Birthday 🎂 may you many more years to celebrate 🎉. Great job on the table. Was very different not hearing you talk for the first 25 minutes. 😂😂
Lol yeah I figured I'd shut up for once 🤣