Eco Worthy Tracker Troubleshooting controller and actuators
Vložit
- čas přidán 5. 09. 2024
- How I corrected the problem with the controller screen when it displayed a row of Black Squares. And inverting the actuators to stop water from getting in around the actuator ram.
Eco Worthy Dual Axis Solar Tracker will increase your solar panel efficiency by 40% by staying aligned to the sun.
#ecoworthy
#ecoworthycontroller
#ecoworthyactuator
#solartracking
#renewableenergy
#cleanenergy
#greenenergy
#solarpanel
#solarpower
#energyefficiency
#sustainability
#smartenergy
#solartechnology
#suntracking
#energysaving
#solarefficiency
#solarinnovation
#ecofriendly
#greentech
#solarenergysystem
#trackthesun
#ecoworthy
#offgridliving
#zerowaste
#carbonfootprint
#ecotech
#ecoproducts
I like the idea of turning your actuators in that direction.
That should really help extend the like of then actuators life . Thanks and take care
Very good information for people with such systems and probably more applications and equipment, thanks Lloyd
You are very welcome Jan, I remembered having to do this on early automotive electronics and it was useful on the tracker too. Take care my friend
That was a great fix and tip connecting the cables together. Turning the actuators upside down seemed like a great idea, I did not think that type is fully water proof
Thanks, I had replaced an actuator earlier and took the old one apart. It doesn't have a seal of any type so with a little luck this will help.
Lloyd that is a very nice solar array so you have there... and those two fixes will definitely help anyone with the same issues...
Thanks Rick, figuring how to clear the screen was helpful. If I couldn't figure it out I would have had to replace the controller. Take care
Nice of you to pass that along. You've got an awesome set up there. Upside down is best for sure. Have a great day Lloyd!
Thanks, I hope this is helpful to someone who is interested in finding out what the problem is.
I'm sure it will. 👍
Hello.
Problem with the solar tracker monitor screen.
An issue where the screen becomes black at night and cannot be operated after that.
You found a way to reset.
Use the power cord.
I'm glad the problem was resolved!
And you have solved the problem of moisture and water droplets.
Turn the actuator over.
Wait helpful for users facing similar issues.
Thank you for showing me.
Thank you my friend.
Thank you very much my friend. I have checked it several times to make sure it doesn’t fail and everything looks good. Have a great week
Good thinking on the actuators . For the display screen I've run across that on a completely different use but it would trip out and show the black squares as a overheat fault if the display screen is in direct sunlight .
Good info Steve about the direct sun. This one stays shaded by the panels but anything can happen. I will remember that. Thanks and take care
How's she goin'? That was a slick fix eh. I hope that keeps the system clear for ya. That's quite the system you have Lloyd! Glad to see it's working out for good for ya!! Take care!!
Fingers crossed Mike, I have been very happy with the tracker . It does a good job maximizing the solar panel output all day. Thanks
Good idea Lloyd. It worked! Hey, you guys could use some snow.
We had our first winter cold spell a couple of weeks ago, It lasted 68 hours! with the temps in the teens and twenties and a very light dusting of snow that didn't even cover the ground. Yesterday it got to 72. That's life in Texas for you. Thanks Ron and take care
Amazing and great information thanks brother good job God bless you
Always welcome Marlon, I was happy to figure this out. Have a blessed week
very nice sharing
Thank you very much Dam, have a great week
Nice fix Lloyd, 😎👍
Thanks Tom, Hope this helps someone with the same problem. Take care
that is an amazing system you have there
Thanks Dan , I have been happy with it. So far I haven’t had any major problems.
Good easy fix Lloyd!
It was easy and I will remember this for later for sure. Thanks and have a great week
Good video
Thanks Terry, Hope this helps someone with the same problem. Take care
fantastic system we dream of getting off the grid
I have really been happy with the system and more comfortable with the program. Thanks
Great info there Lloyd , thanks man ! 👍👍
Thanks Shawn, I used old school automotive technology to clear the screen and it paid off. Take care
Magic...sorted.
Thanks Noel, I sure was happy to figure this out. Hope this info helps others . Take care my friend
Great fixes!
Thanks George, hope this will help someone later with the same problem.
Those are two excellent tips.
Thanks Dan, it may be helpful for those with a Eco-Worthy Tracker. Take care
Right on! 👍👍
Thanks Matthew, Hope this helps someone with the same problem. Take care
Nice fix👍👍
Thanks Mel, Hope this helps someone with the same problem. Take care
Good tip.
Thanks Nathan, it is working like a champ . Take care
it seems like all the electronic stuff today can be cleared by unhooking power or in my case with this little cell phone that basically locked up,, I just shut it off for a while an when I turned it back on,, all was well.
I agree Vernon, just like you said if a device should lock just shut down and restart. Thanks
Lloyd you are not just a pretty face my friend. haha
Always good to have a backup plan. Thanks and take care
Very good information for people with such systems and probably more applications and equipment, thanks Lloyd
Thank you, figuring how to unfreeze the screen was a big help as saved me from buying a new controller. Have a great week