Wrecked Aprilia Completed! Troubleshooting & Cost Breakdown | 2014 Aprilia RSV4

Sdílet
Vložit
  • čas přidán 13. 12. 2023
  • ITS DONE!!! My Aprilia RSV4 is on the road! What a journey!!
    In this video I took care of troubleshooting the engines code using the Guzzidiag diagnostic tool.
    At the end of the video I summarized the total cost of this project! It was a lot more work than i anticipated, but it was 100% worth it!
    When I first started the bike it was throwing codes related to the intake air pressure sensors. It turns out the previous owner disconnected them when he originally tore the bike down.
    I reconnected the sensors ... BUT I HAD ANOTHER ISSUE!!! the bike wouldn't rev above 7000RPM.
    Once I reconnected the upper fuel rail the bike was 100% and ready for the road!
    WHAT A JOURNEY!! this bike was an exciting challenge and I'm so glad I went through the whole process! thanks again for watching!
    The manual from AF1racing and the Guzzidiag software are key to the diagnostic process!
    OBDII connector -www.amazon.ca/LZLRUN-INPA-Dia...
    Fiat Connector - www.amazon.ca/Acouto-Connecto...
    U1702: no signal
    U1701: no signal
    P0105 Airpressuresensor cylinder : to low
    P0106 : to low
    P0210 Falschluft Krummer : invalid signal
    P0211 : Invalid signal
    Aprilia RSV4 not reving above 7000rpm
  • Auta a dopravní prostředky

Komentáře • 9

  • @grantstockwell6688
    @grantstockwell6688 Před 7 měsíci +2

    Dude's collecting check engine lights like thanos and infinity stones.
    Hah glad you got those issues sorted out, those gremlins can be a pain!

    • @lukesmotorshop
      @lukesmotorshop  Před 7 měsíci +1

      LOL!! thanks Grant!! luckily the ABS lights turn off after the bike rolls a couple feet ... the system calibrates the sensors after the battery is disconnected.

  • @teresaaysan6011
    @teresaaysan6011 Před 7 měsíci +1

    Yay! Good job Luke.

  • @jhernandez4300
    @jhernandez4300 Před 7 měsíci +2

    good video im building a 2014 rsv4 and bought it with no key and broken ignition.
    were did you get your dash and key from

    • @lukesmotorshop
      @lukesmotorshop  Před 7 měsíci

      Do you know the code for the dash from the previous owner? without the code you will need to buy the dash, ignition and key that match each other. check out my previous video (I went through the same issue)
      I bought the dash from someone on the www.apriliaforum.com/forums/forum.php
      Search through the buy and sell group. MAKE SURE THEY KNOW THE CODE!!! or that it is a new dash.

  • @jasonanderson1843
    @jasonanderson1843 Před 3 měsíci +1

    How is that running? I just noticed you don't have the ram air intakes installed

    • @lukesmotorshop
      @lukesmotorshop  Před 3 měsíci +2

      Runs beautifully! I installed the ram air intakes after this video … they were on back order for a while!

  • @rapscallion1809
    @rapscallion1809 Před 5 měsíci

    thats what mine did when it dropped a valve and destroyed my motor rendering the bike junk since they discontinued the pistons no im out 13k$