NANROBOT RS7 Hydraulic brake adjustment. Electric scooter how to.
Vložit
- čas přidán 7. 09. 2019
- In the video I will show you how to adjust the hydraulic brake for the Nanrobot Rs7.
repair,Electric,wheel,review,motorized scooter,handle bars,bike,repair,fix,scooter repair,scooter review,battery,speed control,wires,fast,miles per hour,mph,controller,helmet,light,led light,led,brakes,abs brakes,horn,bell,maintenance,preventive,maintenance,pm,new,ride,speed,lithium ion battery,scooter tires,rubber,aftermarket parts,nuts,bolt,parts,screw,brake caliper,brake rotor,scooter brakes,how to fix,pros and cons,nanrobot,dualtron,macwheel,gotrax - Auta a dopravní prostředky
This method works on my yume d4+!!! I was having some rubbing and the rear wheel wasn't spining as freely and making a sound, now its good as new!
Bro the way you explained this is like no other I was aware of the break handle thing but only thought it tightened the stiffness of it, had no idea it moved the breaks, I have been in break disk hell as my break disk came shot when I recived my scooter... Bro thank you, I think you solved 99% of my problems.
I wish you posted this earlier. Spent an hour trying to adjust ls7 breaks today. Finally managed to adjust them perfectly using the same method. Great video. 👌
Thank you glad i could help.
I have the gunai gn10 and this has helped me INCREDIBLY !!!!! GREAT VID 👍
TY for making this video. Very helpful.
Thanks you very much for million dollars information 😍 . I just reach home after to see technicians electric scooter . Just to make tight brakes he tell me to change the red part near wheel 🤨 cost 100€ . But when I find your video and watch then do same process . I save right a way 100€ . Thank you so much again 😘🥰
Exactly what I needed bro, thanks
great stuff! I just bought the NANROBOT d6+ with hydraulic bakes.
amazing scooter but the pads were rubbing. now thanks to you.. I'll be
fixing this bad boy up and ready for work tomorrow!
keep it up!
Thank you! I'm glad I was able to help. Let me know after you put some miles on it what you think about the scooter. Thanks for watching.
Iv got a gunai electric scooter the brakes are the same as that video and it really helped me thank you
Your a life saver!!! The mechanic lossen the screw on the hand lever and never told me it will affect how the wheel brake. So when i press the brake it wont stop. Isnt that dangerous???
Very helpful video D6+ Brake alignment sorted,, Thank you.
Very helpful information, Thanks!
Dude you are the man, ty so much
Thank you sir!!!
Thanks 😊
Great video. I will try this later when I'm home .
I changed brake pads of my yanobike t10
Hydraulic. And didnt know about the scree by the lever .
Back wheel is sticking big time .
This might save me
My scooter makes like a bell sound on the rear disk brake,if i do this you think might eliminate the noise?
Hello , my scooter thinks the breaks are enabled when I turn the scooyer on it’s a 2400w one? Have you got any suggestions because it doesn’t move
Does this process work the same way with the rear brakes? Just got my RS7 Nanrobot! Please and thank you
I am curious,does your RS 7 use cable actuated hydraulic brake calipers?
Systems that are partially hydraulic use mechanical brake levers with a cable to operate a hydraulic caliper at the rotor,whereas a complete hydraulic system uses both hydraulic levers and calipers.
You posted your video 4yrs ago,but I just came across it on CZcams,and I am not sure if you still have the scooter and are able to check the brake system to answer my question.
Hey I just bought an ls7 model used and the rear brake has no grab. I pull the brake and it barely moves. What do I do? I turned it clock wise but there's no pressure. Is it possible to turn it too far or is it just the break pads being too far gone
This was exactly what I was looking for! Thanks for posting. Can you upgrade the calipers on these?
Yes you can. I think a lot of brands our universal.
Have you seen a large improvement in grip with the street tires? My d6 came with knobby off-road tires and they are pretty twitchy and don't want to go straight at low speed. I was thinking of just replacing the front tire but I'm not sure yet.
Street tires definitely give you more grip and a smoother and quieter ride.
How do you change the pads ?
Do you have an idea about when the break light doesn't work anymore please?.
My problem is that those brake pads or calibers don’t move when I press the brake. I don’t have the exact same scooter but the brakes look identical. The problem is not in the brake handle, I’ve tightened and losened it. The brake is just so tight and doesn’t really brake at all when I press it as hard as I can.
Thanks for the very valuable info I find it very useful cause I have brake pads a little too close to the disc and my disc is a little warped causing touching. I have a situation I tried to remove the deck cover (where your feet rests) but it won't come off.. :( I removed all the screws but it's jammed in there real tight and I could not pop it open with my own strength. I wonder if the retailer glued the deck for sealing purpose or to prevent user from opening it to void warranty. I need to be able to remove the deck in the event I need to troubleshoot or replace batteries.. My scooter is generic brand 5600w scooter that looks very similar to yours.
Thank you for the nice comment. Sometimes they use a sealant like silicone or something similar to seal the deck onto the scooter. What i would try is to take a flat head screw driver and try to pry the deack off. That usually works. I had to do the same thing with mine. If yours is similar to mine then after you get the deck off scrape all the silicone off and modify yourself a thin gasket to put in its place for added protection from water. You can see how i did it one of my videos. Hopes this helps and let me know how it goes.
@@wattsinyours Thank you for the advice on the flat head screw driver I will try that. I'm a newb when touching the scooter but you gave me peace of mind try going that route. Thanks for the advice!
Out of curiosity
Are all break caliper size are the same
Or it's dependent on manufacturer?
Sir where I can buy that beautiful hydraulic brake
Nice job love the channel I have a quick question is Ginger a Socialist Liberal Bernie Dude ? He stop answering me since I ask him if Mexicans were playing soccer at 3 am
Lol i dont know but that is kinda funny. No harm intended im sure.
Will this work for a nami? I’m finding it hard to move the wheel in certain areas,like it seems to be getting a little stuck.... and I tried the break handle thing (I may not be doing it right) but I followed this and it seems to be making it even tighter...?
I have a Klima and this similar adjustment worked for me. Unfortunately I still have a lot of brake squealing. They tell me they might be fully metal pads, I dunno. What model do you have?
Can u do the oil brake adjustment on the d6 plus?
Sorry i don't have the d6.
which one are better disc brakes or oil brakes based on your experience with scooters?
Oil brakes
why is your brake handle moving almost into handlebar?
WHen I adjust that little screw under the handle, the pads are rubbing. But when I loosen it up to where the pads aren't rubbing, the brake handles pull in way too far, it's like there's no happy medium. ugh.
actually figured out that BOTH rotors are bent...and this thing is brand new. Come onmnnnnnn
@@JoshStreetDesign wow sorry to here about your rotors. I think they are fairly inexpensive to replace, but still annoying and a little bit of a pain in the but to replace. Hope all goes well and your up and running soon. Thanks for watching.
When I squeeze the brake it's not grabbing the caliper why?
Do you know where I can buy these brake pads?
Nanrobot.com then go to brake pads click on it and pick the model you have.
I got a Mercane Wide Wheel scooter 🛴 do you think I can do the same?
Not to sure about the wide wheel but if it has hydraulic brakes then the process will be about the same. Just like on dualtrons, wolf worrier, 11x and bicycles.
wattsinyours no, it has the regular one, thank you.
@@giannismitropoulos5456 just mechanical brakes?
wattsinyours yes, just mechanical brakes at the back wheel
My scooter keeps on jerking when i put on the brakes. How to adjust it?
If you adjust yhe brakes the way i show in the video you shouldn't be getting no jerking.
Hey from where i can buy this hydraulic brakes?
Hard to find these particular brake brand but pretty much any hydraulic brakes for electric scooters will work. Alibaba or aliexpress are 2 good choices.
Yesterday I received my new RS7 (yes you can still get them new) I have a concern about the spring clip on the top of the hydraulic break caliber, the clip seems like it will pop out at any time, what do you think about this issue.
By the way, I was amazed at the size of the deck on scooter especially how high it is, this things a monster 👾.
Yeah i was concerned about it to at first, but it will not come out. That's awesome you got one. It has been a really good scooter so far.
@@wattsinyours
Quick question,
Yesterday I charged it up to 70.1volts, and tonight it's at 68volts, I understand it can loose the first 5% pretty quick but does yours drop like that?
Thank you
Philip PORTER
@@philliprporter mine only ever charged to 68.8 , but it will bleed some voltage. That's normal. Also make sure u turn off the lights first before you turn off the scooter then turn off the scooter.
@@wattsinyours
Thank you, you are a great source of information for me.
Your in depth videos, and knowledge is why I picked the RS7
Thank you
Philip PORTER
@@philliprporter who did you buy your scooter from?
Not sure if you're aware but your rear tire is mounted backwards