Do you have Dim Low Beam from your Projector Headlights?
Vložit
- čas přidán 7. 08. 2020
- Dull 🕯 or dim low beam from projector headlights is caused by ..... NOT the bulbs 💡❗ ... dim headlights causes explained.
🎥 How to open your headlights: • Open your Headlight As...
My headlights customisation playlist: all you need to repair or customise your headlights.
• Custom Headlights Buil...
💡 Don't forget to subscribe and hit that bell 🔔 to learn more about looking after your car:
czcams.com/channels/-C_1iVg.html...
💚 If you got some VALUE from this video, PLEASE give it a ‘like’ and maybe consider showing your appreciation by buying me a coffee: paypal.me/cyclonecyd
I promised a list of cars that have the same Hella E55 projector unit as the Saab and where the EVOX-R can be used as a replacement:
Audi A6 C5 2001-2004 (bixenon facelift model)
Audi A8 2002-2009
Audi A8 S8 D4 2009-2012
BMW 5 series E39 2001-2002 (D2 xenon headlight only)
BMW 5 series E60 2003-2006 (only for D2S headlight, without AFS.)
BMW 5 series E60 E61 Saloon Wagon LCI 2006-2011
BMW 7 series E65 2001-2008
BMW X5 E53 1999-2006
BMW Z4 E85 2002-2008
Mercedes-Benz A-class W176 2012-now (a D1 to D2 adapter is needed)
Mercedes-Benz CLK W209/A209 2002-2010
Mercedes-Benz CLS W219 2004-2010
Mercedes-Benz E-class W211 2003-2009 E200 E220 E280 E300 E320 E350 E420 E500 E55
Mercedes-Benz E-class C207/A207 2009-2012
Mercedes-Benz ML W163 2001-2005
Mercedes-Benz ML GL W164 2006-2010
Mercedes-Benz R-class 2005-2010
Ford C-max 2003-2010 (for replace OEM hella)
Ford S-Max 2004-2009
Ford Fiesta 2009-2012 (replace halogen projector)
Skoda Fabia 2010-2014
Skoda Octavia 2009-2013
Skoda Superb 2008-2015
B5.5 2001-2005 (need certain modifications)
B6 2005-2010
Polo 6N2 1999-2001
Touareg 2007-2010 (D1 to D2 adapter is needed)
Mitsubishi Lancer EVOX-R 2008-2016
Opel Vectra C 2002-2008
Saab 9-3 2002-2007 (need certain modification)
Porsche 911/996 1999-2004 (fit for original hella headlight)
Chrysler Grand Voyager 2008-2015 (a D1 to D2 adapter is needed)
Range Rover 2001-2010 (only fit on hella headlight)
I can't promise you that this list is exhaustive, nor that some cars may require some slight modification for the EVOX-R to fit correctly
I know my Saab needs modification, so I have sourced a second-hand pair of headlights to work on
Pair EVOX-R 2.0 D2S projectors with clear lenses
bit.ly/EVOX_R_2
LEADS:
bit.ly/D2S_lead 1x pair req'd
bit.ly/ballast_lead 1x pair req'd
👆 all with worldwide delivery available 👆
Learn more about looking after your car:
🎥 The importance of keeping your battery clean:
• The Importance of Keep...
🎥 A comprehensive guide to battery and alternator testing
• How To Test Car Batter...
🎥 How to replace a CV [constant velocity] joint boot with a split kit:
• Universal CV Boot Repa...
🎥 Don’t let your fuel filter end up like this:
• Why Should I Change My...
Sealant applicator gun:
bit.ly/Applicator_gun
Spare nozzles for your sealant tubes:
bit.ly/spare_nozzles
Leak sealing duct tape
bit.ly/Leak_seal_tape
Everyone should have a tyre pressure gauge in their glovebox:
bit.ly/Tyre_press_guage
bit.ly/Pressure_Gauge_2
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
bit.ly/Tyre_stirrup_pump
If you’d like to learn about the science and engineering of cars:
Bosch Automotive Handbook:
amzn.to/39va9xA
Are you trying to grow your own CZcams channel? I use TubeBuddy, try it out for free:
www.Tubebuddy.com/CycloneCyd
Thank you - Auta a dopravní prostředky
🎥 🎥 How to open your headlights: czcams.com/video/N0NUML7IbOE/video.html
You should make an entire season of videos about the 2013 to 2018 Nissan Altima headlight housings. Worst ones ever haha
Syd! Thanks for this. I have a 2009 Camry, and as the years progress, and I get older, I can't see the road at night. So, I blamed my eyes of course. But it was getting so bad, I had to try something, so I got new bulbs. No help. I got the outside of the lenses buffed up. No good. Got spiffy new LED bulbs at suggestion of dealer. Nada. Checked voltages. All good. Your explanation rang true with me, so I ponied up and bought new aftermarket headlight assemblies and OMG, I can see now. (I bought midrange on price - $160USD each side, but OEM is more like $360USD. Bit of a crap shoot when buying, but I had to do something). Why don't dealers, and parts suppliers talk about the degradation problems of projector headlights? You sir, are a genius.
Thanks JD, your comments are much appreciated
@@jcdaviescan bru i got 2010 camry altise (australia version) my h7 low beam light is sht, i changed new highend 25k Luminens one but nah still sht, i buffed up headlight aswell, still sht. Should i get tht vland headlight for it ?
Great video.
Straight to the facts no filler on opinions no annoying intro!
Perfect
Thank you
love videos without intros and self promoting jibberish
Thank you so much. I never considered that part of the light assembly going bad
I paid $600 for LED lights because mine were so dim. No change. Ty for taking the time to do this. Def gonna see if my hubby can do this
Finally a good Video explaining it properly!! Thank you !!!
I'm glad you liked it! Yeah, I see loads and loads of posts on forums of people complaining about headlight performance on cars approaching 10 years old, and they always spend a ton of money on different bulbs to no gain, but no-one ever seems to suggest it's the projectors themselves, when, to an Engineer, it so obviously must be!
@@CycloneCyd agreed man, I tried led and hid none worked , and even rewired everything because I thought I had bad ground. Looks like I have to change the assembly if I actually want better light output
I ve nerver seen such a good guide on headlights. Keep on the good work sir. We are appreciated
I been trying to figure out why my projection headlights where getting dim and I tried at least five different bulbs over the past year and I think you just gave me the answer I been looking for 🤯🤯🤯
Thank you very much! I've been driving with my dim headlights for a while.
Very welcome! I've had a couple weeks break, but will publish the next in this series in a few days.
Thank you for your video. I have a 2014 Nissan Maxima with bad low beams. I polished the lens then put in new bulbs then led bulbs and nothing really helped. I have watched your video and can't wait to tear into my car with new hope. Thanks so much.
Me Answering yes after every question 😂
Ha ha, yes lots of people blame the bulbs when it's actually the projectors
I bought alot of bulbs but u have my answer, thank you sir
Happy to help
Very clear and sobering video. You saved me a few hours of trying to fix the unfixable for a 1992 VW Vento. Off to buy new head lights.
Same problem on a Ford Focus mk3. I used a cheap inspection camera to peek inside to have a look at the reflector surrounding the xenon bulb. The lower half didn't have any reflective coating left at all! Unfortunately Ford used Permaseal on the headlights so I found it easier to get some complete lamps from a newer car. I used the same inspection camera to verify that the newer frontlight was in better shape. Before doing this I wasted money on new bulbs. Thanks for this video!
Just asking my Wife recently if I was going blind, (she was having the same prob - we thought we were just getting old _🤣) ....once we are out of town in b roads with no street lights, I can barely see the road in front and the curb and have to slow down as if it was a confidence problem from losing sight !!
This explains it - I have tried expensive bulbs cheap bulbs... no difference, so will look into this - thanks so much for this video 👍
Wow what a nice explanation. Thanks a lot for sharing this knowledge.
My pleasure. Welcome aboard.
Yeah, it's not well known. just about everyone blames the bulbs (despite fitting Osram's best 🙄)
Excellent production. Very informative. Thank you.
Thanks for your comments Winter, much appreciated.
YES!!! This is happening on my Daughter's 2013 RAV4... changed bulbs, adjusted the angles,... nothing. Thanks!
Thanks! I was thinking by projector reflectors couldn't be bad because I never had condensation inside my headlights. I switched bulbs from my other car into the problem car and got the same result. I was starting to suspect the ballasts but it seems more likely a gradual degradation of both reflectors. Very nice to find some factual information.
Love your comprehensive guide to customising the headlights. Great work mate and given me inspiration to do mine too👍
Awesome explanation, thank you! Helped me figure up out for my e39
They have the same Hella E55 projectors don't they? So, did you use the EVOX-R replacements?
@@CycloneCyd yeah the OEM Hella E55 projector seems to be the default, and thats that I currently have. But they are getting very old and worn out and I'm looking at DEPO brand replacements. Close to OEM, but I am having trouble figuring out what brand of projector do they use. Do they use this EVOX-R brand or another?
I personally a fan of projectors as like you said they are brighter than the standard reflector headlights especially I’m running on HIDs and they are a lot brighter than halogens!😊 my car did come with reflector lamps and I converted to projectors so I can legally run HIDs in projectors so they won’t be light scatter all over the place! If I use in reflectors the light output will just send everywhere and just keep getting flashed at! Great video by the way!😊
Amazing video!! Looking forward to seeing the rest 🙂
All in this playlist. Next project is a full LED twin projector conversion. Just waiting on some parts.
czcams.com/play/PLOaePmzqZNJ3ckhEjWMapU0O2pCkG9G5K.html&si=LjAZUqIIoCzGknYo
Very good video. I will look at the rest later. 👍😀
Follow the playlist over the next few weeks as I add in all the 'how to' videos and show the final results
My god ... you’re spot on. My Nissan Altima does the same .. I changed the bulbs to cheap to Osram 6000 lum but no difference, now I’m going to change the projector
Once the reflectors start to degrade no amount of bulb changing will help. You're just burning a hole in your wallet buying bulbs.
@@CycloneCyd greatly appreciated 👏👍
Thank you.
Thanks, was always wondering why when I first installed HID bulbs I was blown away by the brightness, now it’s dimmer than standard halogen bulbs… I guess my quick fix is a new set of headlights
Thank goodness for this vid!!
thank you
Oooh, nice video. I've been suffering from same symptoms on my passat b6 2010 with those moving headlights. But i can't find projectors anywhere.
You sir are a genius!
Ah, if only! Einstein was a genius. Me? I'm just fairly bright and passing on knowledge I learned from other bright Enghineers.. Thank you
Educational video. I had a 2018 car with projector lights and the lights appear very dim. Although I did have a 5 year old car with projectors and they seemed fine. How long do uiu expect the reflectors to degrade?
Hi, thanks for the explanation. I own a Mazda Xedos 6 and don't know what type they used in the days. Do you happen to know which they used in those days?
Thanks a lot
Excellent thank you
Thank you very much. I think I have found the solution for my problem.
You're welcome! Yeah, this seems little known outside the industry. Are you planning to change the projectors then?
@@CycloneCyd Yeah I think I have to change it. I have used different kinds of HIDs and LEDs. Output was very low. I was considering for installing expensive LEDs. But this time I will check the housing before changing.
@@MahmoodHossainMunna have a look through this playlist czcams.com/play/PLOaePmzqZNJ3ckhEjWMapU0O2pCkG9G5K.html and pick out the videos that are useful to you.
You can go for a straight forward OE spec projector replacement or upgrade with EVOX-R 2.0 projector and no need to open up the front if you're not worried about any other custom mods.
Thank you👍
You're welcome. Don't forget to save the playlist to favourites so you don't miss the series as it develops 👍👍
Are there any differences between the projector for a Halogene lamp and a Xenon one?
How long do you reckon it takes before my nice shiny projectors become dull? I'm also looking at swapping out my halogen bulbs (HB3/9005) and replacing them with aftermarket HIDs with the same bulb size. Do you think that's viable or should I change the whole projector assembly to accommodate D2S instead? Is D2S better than aftermarket HID 9005 bulbs? Thanks.
are there any for a 2014 KIA Sarento? I just put in $50 bulbs and they made no difference.
Thanks for the video it was great to understand why my headlights have been getting dimmer and dimmer over time. Do you know how I could find out what brand projector unit do I need for a Honda element SC?
Great video, where I can buy those projectors for my 2008 9-3? It's a standard h7 bulb fitment
been looking for evo xr in rhd everywhere , wish id seen this before i bought something else
Thank you so much I was going crazy about why my headlights were so bad as you said tried new bulbs cheap expensive no pretty much no difference even tried xenon and led same thing not much better tried measuring the voltage it was okay tried cleaning the lenses and polish the headlights no difference now I'm gonna pick up some brand new ones I think this will be the solution for the problem my fog lamps are better than my headlights scary driving at night
No problem 👍
#Cyclone Cyd Thank you for this helpfull video. Finally someone explain what a heck can be wrong with my candle light. Also I would like to ask do you know what kind of projector is in a Hyundai i30 from 2016? After this video I'm quite sure I need to change them.
Hi could u use autosol to Polish up or or something else or is that not a option.
I have just bought a 2006 jag X type. I believe I have projector lights. Do you know which replacement would fit mine?
hi cyd i have problem with my lx470 1999 low beam please advice me what to do
G'day Cyd!! i enjoy your videos mate, you do a great job of breaking every step down. Quick question if I may please mate..? i see you're running the HIDs on your 93. Will these E55 projectors also work for the 9-3s with the halogen lights? Hope you and yours are keeping well? 🤞Cheers from downunder 🍻
The halogen lights on 9-3 are also Hella E55 projectors. Unfortunately the EVOX-R projectors only come with xenon holders. You could buy an E55 replacement projector set, and when you have the lights arart swap the halogen holder from your old ones to the new ones
bit.ly/E55_replacement
@@CycloneCyd thank you so much mate. Much appreciated! 🙏 Cheers from Brisbane, Australia 🍻
My reflectors still look great, 17 years later. I wanted projectors but not if they don't last long.
Great video. I have a question and have not found the answer by googling. How can I tell what type of headlights are on my 528i? The low beams are very dim but the high beams are great.
projector headlight xenon for toyota fortuner 2013 sir.what can u say about that sir?
Hi I have kia optima 2013 and the left headlight is not bright at all. Can you advise. The bulb looks good. Can you adcise
Would chrome spray hold up against the heat? Could be worth looking at?
The ebay listing often say "some modifications needed" do you know what that means? Or are they plug n play?
Useful video. Any idea what projectors are need for ford focus mk2 st225 with xenon headlights?
No I haven't. being Ford it wouldn't surprise me if they are integrated into the headlight rather than standalone projectors. try taking one apart to have a look (carefully). See if you can pick up a cheap 2ndhand one to take apart.
Great videos. My Volvo S60 2012 xenon projectors are dim low beam and also the levelling system doesn't work. Local mechanics have told me to get new assembly for both headlights. I checked with Volvo for new assembly it's very expensive. Also the dealer told me you will need separate control units. I have no idea does existing control unit & motors in my current assemblies work or not an can it be reuse. I know your video series teaching how to fix it yourself but I am afraid will I be able to do it myself. So thought to ask you, can you suggest any garage/mechanic shop/service who can repair my current faulty headlights for me in UK/Ireland region?
What's really weird is I bought some brand new headlights for my 2011 Camry and no matter what LED bump I put into the projector low beams, it's not bright. I've tested both 16,000LM and 22,000LM bulbs side by side at the same time in the car and they are BOTH the same exact brightness and neither are bright at all for that matter. The stock halogen bulbs far outperformed the LED's I have tried in the projector low beams. I don't know what the deal is and I have no clue how to fix it.
Only video out there with the answer
Yep, I consulted with subject matter experts to find this out. It was a surprise to me too.
My car is a Ssangyong Karando 2016 will this prose work on my car. Ps good vidoes.
Hi, thanks for the video. Would a 2009 Camry have the worn out type of projectors?
Cast alloy projectors are best because they deal with the heat better than pressed steel ones. But they all suffer the same fate eventually.
Pro 🙌🏻
Hi Cyd - as summer holidays approach could you do a video on adjusting right hand drive Saab 9-3 projector headlights (in my case xenon) for driving on the continent? (I assume you can't just put stickers over the headlights like in the old days) Thanks in advance!
Been there, done that: czcams.com/video/yGJKhyrOWU0/video.html
@@CycloneCyd Perfect! Not sure how I missed that before. Thanks!
Thanks! Wondering why my headlights are so dim even after getting brighten lights.
Thanks for watching, glad it was beneficial to you.
Plus my actual projector lens is foggy. My headlight assembly is factory sealed and you cannot take it apart without breaking it. The only remedy is to purchase a whole new headlight assembly for $600
Which car is that❓ Have you looked through the playlist? I show a method of cutting into the rear of the headlight that might work for you. OR maybe cut around three sides of the case and 'bend' it open on the fourth. Plastic weld it back together. More than one way to skin a cat 🎓
Why is that no one addresses the positioning of a halogen bulb in the projector assembly? I just bought a set of headlamp housings for a VW Passat. They came wired backwards, to begin with (high beam connector to low beam bulb, etc), but that was a simple fix: just drag the wiring to the right place. The REAL problem is that when the H7 bulb is properly seated in the low beam projector, the light output is quite dim. With the bulb released from the clamp, but powered, I find I can move the bulb back a bit and the light output gets much brighter. That means the filament is NOT in the focal point of the assembly. I need to fix that. Any thoughts on THAT issue?
Absolutely awesome ! I have a 2009 Saab 9-3 with halogen headlights that light up the first 3m in the road. It’s awful. Could the post the AliExpress link sonI can buy the new projectors and also upgrade to Xenon with ballast please.
I did fit some LED and it’s slightly whiter, but no further projection. Also with LED they do a disco light after turning off the car for 20 seconds lol.
s.click.aliexpress.com/e/_DdjgRpH
OR
for a few quid more, go LED s.click.aliexpress.com/e/_DCf2tQr
@@CycloneCyd Will they fit the MY09 Saab ? I have separate Hi-beam, so don’t need the Bi-LED. Or can I wire my hi-Beam into these as well for two Hi-Beams ?
Lux good .
😂😂 I see what you did there. Thanks for watching, don't forget to subscribe and share
Hi! What projectors do you think I should replace the original ones with? I’m fixing up a pair of original halogen headlights, Hella, from another ng9-3 2006.
I would say that you have 2 or 3 choices:
1. you could use these direct E55 replacements (OE equivalent) and swap the bulb holder from the original halogen projector onto these bit.ly/E55_replacement
2. you could use the same EVOX-R 2.0 projectors I did (bit.ly/Sinolin_EVOX_R_2_0) and upgrade to xenon lights. Also need ballast and driver kit bit.ly/HID_convo_kit
3. go wild and fit a set of gen4 projectors bit.ly/Sinolin_EVOX_R_GEN4 also needs the ballast kit above.
Depends a little on what you are trying to achieve. I'm very pleased with my new projectors. Decent light on dip beam (needs adjusting so may yet improve) and stunning main beam performance. Options 2 and 3 will only cost you a bit over £100 to do the pair and is a great value upgrade for the money IMO
You will also need headlight butyl sealant bit.ly/H_light_Sealant
@@CycloneCyd Thanks for your answer, man! :) Well, I actually have the whole original Xenon-set laying around. I've been thinking of converting to the original xenon headlights, level control sensors, light switch unit. Of course I have the ballasts and ignition transformers. I have been studying WIS and EPC but I'm not getting smarter. Converting the Halogen headlights to Xenon is not legal in Sweden, but it is to convert to the original Xenon-system, even if you might have to "re-register" the car. If you'd put some kind of Xenon-conversionkit it won't pass the inspection once a year. :/ I really hope I'll be able to fit the original xenon system, though. Just trying to figure out what I have to do to convert.
I bought some butyl sealant so I'll be able to close the headlights when I'm done. Cleaning them up right now, thinking about what I should spray them with. :) Keep up the good work, man!!
Hi great video, any idea what projectors are in a 2010 E220 mercedes W212 with h7 bulbs. Want to order before I strip it down.
Or would I bet bettering upgrading to some else when I have them opened up anyway?
I don't I'm afraid. Go onto Aliexpress and seek out the Sinolin store and send them a message to ask.. You never know your luck they might have an LED projector you can retrofit
Hey Cyd. How’d you go about cleaning the actual projector lenses since they like to get cloudy after time?
The OE lenses do not go cloudy with time. That's how they are made. They have a Fresnel pattern in the glass and are made of glass that is ever so slightly milky white. That's why you can buy crystal clear lenses to retrofit. These EVOX-R projectors come with clear lenses like I show in the video.
Believe it or not, that pair of complete projectors bought from the manufacturer in China were cheaper than a pair of just clear lenses would have been from a certain outlet in the US ❗❗
New information: you were correct, the lenses do get 'cloudy' after some years. It's caused by the heat evaporating plasticisers and other chemicals out of the plastics that make up the headlight structure and some of this condenses on the lenses. It's the same reason your windscreen gets 'misty' on the inside, especially during sunny weather. To clean the lenses you'll have to take your headlights apart. See how to do that in the playlist here: czcams.com/play/PLOaePmzqZNJ3ckhEjWMapU0O2pCkG9G5K.html
Thanks for the video Cyd! This might be the case with my Audi A4 B5 1999 facelift model! I've tried polishing the headlights. My low beam is so bad, especially on rainy black roads. I bought OSRAM night breaker 150% but no success. I usually use my fog lamps on rainy days which annoys the drivers. My question is: is it possible to replace only the projector part or do I have to buy a complete new headlamp? Is it possible to fix it?? It would be great if I could see at nights.
Are your A4 lights halogen or xenon (HID) projectors? Or are they reflector headlights?
@@CycloneCyd Heyy, thanks for answering! I've got halogen ones. Normal H7 bulbs 55W fit in there. They were never modified.
@@SpicyMuscovado so, are they projector or reflector headlights?
@@CycloneCyd They're projector ones of course. I've got no problems with the reflector part. This is why I looked up to your video. I was wondering if the projector part can be replaced somehow. Buying whole headlights is just too expensive for such an old car. Well at least if it's original of course. There's huge price differences between them. I don't know why. One is like 65 euros each and the original Valeo is around 360 euros. Why is the huge price difference? Is it worth to buy the cheap one? That's the whole headlight body price.
@@SpicyMuscovado Sorry to take so long to reply. I can't find any projectors listed for your car.
I agree the originals are overpriced, but there is usually a reason the cheap ones are cheap. Do they have any reviews?
I'd be tempted to see If I could get a 2ndhand light that's the same and take it apart. measure up the projector and try to find one that's a similar size.
Another tactic: I imagine your reflector side is a "main beam assist" like my Saab and probably has an H7 bulb?? Why not get a small bi-LED projector conversion ( like these maybe, bit.ly/2inch_biLED). That way you've introduced a new and better dipped beam, but kept it legal for the main beam flash function. Many ways to skin a cat and all that
Hey Cyd! I'm going to replace my sharkfin antenna on my saab 9-3 and i was wondering how to best get to it in a sedan modell car? Thankful for answers :)
Hi Marcus, IIRC you'll need a 22 mm spanner to undo the nut that holds it on (or a pipe wrench). You can get at ir by first removing the parcel shelf czcams.com/video/Y0IU6FrIDWA/video.html then C pillar trims czcams.com/video/wsEEfFUiZFo/video.html then CHMSL czcams.com/video/QX3lPONGN-g/video.html you should then be able to pull the rear edge of the headlining down enough to get at the connectors and nut. When you put the new one on, add some silicon to the base before placing it - it's common they leak.
Do let us know how you get on
I will! Thanks for the fast reply and the pointers to the videos. I'll get back to you!
@@CycloneCyd Thanks for all the help! New sharkfin is installed in less than 23 minutes flawlessly thanks to your help! If you want some pictures of My install id be glad to email Them to you! Thanks agian!
@@Marcus-nf6th would love to see pictures, thanks. My email is in the 'about' section at the bottom
Hi Cyd. Cracking video series. How do I figure out what halogen projector is in my 2013 Jeep compass? I can't see any branding anywhere. After watching you video I want to replace the projectors in my headlights.
Are you sure they are projectors and not reflectors? What I would do is try and pick up a cheap(ish0 2ndhand headlight unit and take that apart first to see what's inside. It's also good practice in case anything goes wrong (you haven't busted your cars lights and rendered it undrivable!).
Then you can look for something suitable, but in all seriousness, if it's halogen, I'd consider changing to LED projectors. Seriously - see my H4 mini projector video from just a couple of weeks back. I was amazed how good they are.
@@CycloneCyd thanks for the reply. My lights have the fish eye lens bit so I'm assuming they're projector. I replaced the h9 halogen bulbs with led ones and while they are better they're not much better - the fog lights on my car are much brighter than the actual headlights. When I stumbled across your videos looking for answers, that's what made me think the reflectors mirror like finish might be worn off. I'd like to replace/ upgrade the projector but I have no idea what to buy. Second hand could be a good shout to play around with.
@@maverick85 ok so they are projectors. It's likely they are 'proprietory' ie designed as part of the headlight rather than being a 'standalone' projector like the Hella E55s in my Saab.
The Jag Xk is like that.
That's another reason for getting a used light unit to take to bits. You can experiment with it then.
@@CycloneCyd ah ok that makes sense m risks so much for helping out. Your videos are brilliant. 👍🏻
Español
Inglés
Good Morning I have a Saab 93 from the year 2005 with which I am delighted The only downside that I find is the little light that its halogen lamps give I have tried with several xenon h7 aftermarket kits and also with led bulbs, but they blink and give a blown lamp error Do you know of any model that does not give me those problems? Congratulations and thanks for your videos, they are very helpful
It's the car and the way the bulb check feature works. They all do it. Rejuvenate the headlights with new projectors.
@@CycloneCyd Buenas tardes
I've already cleaned the interior of the headlights. And also inside and outside of the lampshades
Thanks
Hello friend how to clean throttle body volkswagen 1.2 petrol mpi engine
czcams.com/video/qn5nT5jJtNA/video.html
Having similar issues on a 2013 Bmw F30. High beams work fine. The low beams feel lacking.
Almost certainly the projectors burned. What's an F30?
Cyd, hope you can shed some light for me :)
I have a Saab 9-3 Aero 2.0T '05 with halogen projectors and I want to replace those as they are too dull to pass inspection. Here in Sweden I can by no means do any sort of conversion and likely pass inspection. Can I replace with bi-xenon or single xenon projectors?
The halogen projectors are the same E55 as the xenons. So you could replace them with bi-xenon projectors and use a xenon conversion kit to drive them (you could use the EVOX-Rs like I did)
OR
You could use these direct E55 replacements, bit.ly/E55_replacement, and swap over the cast bulb holder from the rear of your old ones and keep them halogen. I show you how to remove the bulb holder near the start of this video czcams.com/video/UPtda2-X1xY/video.html
@@CycloneCyd Thanks a lot Cyd, will look at this E55 replacement, and your other video again :) Thanks for your great work BTW
@@petergammelgaard9107 If you are just doing a simple projector replace, no need to remove the front cover. you can get in the back way (but that glue I used turned out to be crap - plastic weld it back together)
czcams.com/video/BRVPqlIbm7E/video.html
@@CycloneCyd Yes, I have already watched that video several times :) I plan to do it that way, but welding plastic? Is that something and how? Was feeling comfortable with the glue :) Also, from examining pictures of my own and other's headlight openings from the back, it looks to me it should be possible to navigate the projector out through the hole without hacking off the edge. But as watching your video and reading other forums about it, people cut it off, so I guess it is needed. I did order the replacements now (as I cannot do a conversion to HID without re-registering the car), but I would have liked the clear lenses!
Okay, I see it now, looks easy enough to do with an iron, which I possess. Would you think it is necessary to weld it on both inside and and outside?
anything for an alfa romeo 159/brera ? I have very low light projectors (halogen).
What make of lights are they, hella or valeo?
@@CycloneCyd ? oh, no clue, I'll check that out.
@@davidvarela8739 try searching AliExpress. There is nothing listed on TRS.
Alternatively, see if you can pick up a 2ndhand light and take it apart and see if you can retrofit a bi-LED projector of similar size by modding the lights in a similar way to how I repaired mine or make an adapter plate.
Something like this: bit.ly/2inch_biLED
@@CycloneCyd Thank you very much Cyclone ;)
Hello, so I don't know if you can help me. My problem is that the shape of the light from my projector headlights is strange. Do you know how to fix it?
Probably you've either got the wrong type of bulb (H7 or D2S) OR it's not seated correctly, throwing the pattern off
@@CycloneCyd hey , the bulb was not seated properly. Now its all good. Thanks
I have this exact problem with my car. It's a 2009 Mazda3 BL hatchback (European model, of course). Car's done just over 180k kilometers. And my left headlight is just gone. I cannot see it on the road at all. Aimed at a wall it's barely visible. LEDs don't help either. Right headlight is also starting to go dim but it's still visible enough to project some light. Gonna buy new pair of headlamps from TYC because I can't be bothered to find an OEM pair.
It'd be interesting to see the projectors after you've replaced them. the reflectors must be real bad
@@CycloneCyd yeah, i'm quite excited, tbh. but i won't buy just the projectors because i cannot seem to find what brand they are or where to buy them. so i'm just going for the whole headlamp assembly (one reason is; they're cracked and just not good looking anymore).
@@astina7574 I did have a quick look for you but came up with nothing. They might be 'specials'. Mazda make enough 3s to make unique tooling worthwhile.
@@CycloneCyd i know there's nothing on the internet. i guess lenses are 100% Mazda made. i wonder if TYC has the same lenses in their aftermarket replacement headlamps. once i buy those, i'll make a comparison and post a link for you to see before and after, if that's okay with you.
@@astina7574 that would be brilliant thanks 👍
There's a weird screen covering up them good pot plants.
Huh❓
Got an 08 es350 and it's projectors are so dim it's basically driving with a phone flashlight. When it's raining it doesn't even show.
Are they halogen or xenon projectors? I'm not certain but it wouldn't surprise me if the projector are 'built in' to the headlights and not directly replaceable like the Saab.
All is not lost though. I've just recieved two pairs of bi-LED projectors - one pair a Hella fitment that can replace the standard projector in my Saab lights and the other pair are conversion projectors that can be fitted into the manin beam assist side of the lights. I'll be making the conversions switch on and offable, so I can have one pair of dips for town or lit roads and two pairs of dip for unlit roads, plus of course four full beams 👍 I'll try and make the videos more relevant to a range of options, but if yours has halogen main beam assists like the Saab, you could keep the original projector (if it can't be replaced) and fit a bi-LED conversion projector in place of the main assist.
SAABs are great! Its too bad what happened.
You did a great job of hiding that mess, I don't think anyone saw what was under that censor bar. It will remain a mystery forever.
Hahahahaa
Where do I get a new projector for a corsa c?
A little research and I can see that the Corsa C has a poor rep for headlight performance, but I see no real solutions in the marketplace.
My suggestion would be to convert them to bi-LED. Here are 3 projectors in 1.8, 2.0 & 2.5 inch sizes (bit.ly/Bi_LED_25 and bit.ly/3as2frfBi_LEd_18_20). I can't tell from pictures what size would suit best, but they look small, so maybe either the 1.8 or 2.0 from Sinolyn.
Obviously they would require some fabrication of brackets to fit, but I can't imagine it being too difficult.
When I did my headlights I bought a 2ndhand pair of lights to convert, so I could take my time and in case it went horribly wrong.
Perfect okay, thank you
I disagree. OEM Hella reflectors are dull from factory on purpose. only aftermarket replacements are mirror finished, at least for the E55 Projector style. The real issue for declining performance is gas and fumes that condense on the inside of the glass lense. that is easily seen when you power up a new halogen bulb on open air. the first few seconds you clearly notice some smoke raising from the glass. withe certain, not all, headlights using the E55 heat can get trapped at the top of the headlight which will make the reflictive surface peel off from the reflector bowl.
(the dull reflector finish compared to mirror finish makes a more even light, doesn't change overall output at all. If anything, Hella uses frosted glass lenses that can be replaced with clear variants. that makes a real difference)
It's much easier to buy new headlight Assembly for my 2007 Toyota Solara. It's a little more expensive but worth it.
"worth" means different things to different people. Some people would prefer to rebuild the lights themselves and save the money.
@@CycloneCyd yes, you're right. I should've just said better for me. I did research replacing my projectors. However, it just seemed too be much trouble for me. I've often tried to repair things myself and it didn't go well. LOL I would end up buying new after screwing up something and spending more money anyway! 🙄🤦🏽♂️
Do halogen lights suffer more of this due to the heat that xenon bulbs done produce that much?
Do you know where I can buy new projectors for Saab 9-3 2008-?
No, it's xenons that suffer this more than halogens because the heat & UV they produce is much much higher than halogens. This is probably why the E55 projector bowl for halogens is pressed steel, whereas the bowl for xenons is mag alloy.
No sorry, I do not know what projector is fitted to the 2008on, nor where to buy. I've looked but never seen any.
I might try and get hold of a smashed headlight to try and find out
Hello again, apparently the EVOX-R 2.0 *IS* compatible with AFR headlights, but it needs "some modification" - but what the mod req'd is unknown. Also, apparently, if you have AFR headlights, the EVOX-R 1.0 is easier to fit with less modding required. The cynic in me thinks that latter info might be just because the supplier concerned has a stock of EVOX-R 1.0 to get rid of ❗ I'm in touch woth a couple of 9-3 breakers, so during this week I might see if I can get hold of a dirt cheap, damaged 08on headlight to experiment on.
@@CycloneCyd Thanks for your help!
Great if you could find a 08- head light to try this on.
What if you did an electrolysis coating.
There is a company in Germany that will refurbish your reflectors using aluminium vapour deposition bringing them back to like new, but it costs about 60 Euros per reflector. OR you could get a local classics restorer to chrome them, but you'd still be looking at 40 per. If you have proprietary projectors that can't be easily replaced like the E55s, this would be a good option (think Jaguar XK-R).
Bloody hell,there was me going to change my bulbs! 🤦🏻♂️
I Wish There Were Saab Specialist Around Me. 🤦♂️ My Headlights Are On But Dim. I Bought New Headlights To See If It’ll Work But Havnt Tryed Yet.. Anybody Did This Yet? It’ll Save Me Some Time Even Trying!
Your lights won't get better on their own❗ Get them changed, it's easy czcams.com/video/zwBFqpxevos/video.html
Damn, I was hoping you had the ones for Toyota, as aftermarket headlamp assemblies for Toyota and Mazda are absolute garbage, and I can't say it any kinder than that.
An alternative might be to get the projector reflectors out and send them to a classic restorer who can chrome plate them.
blurring the mess haha
Where were you when I was suffering with this issue? 🤔😂
Making this video I expect 🤘🤘. Have you already fixed it, or you gonna give the mods a try?
@@CycloneCyd no sold it , thought I had bad eyes, got a 2008 Vector, lights are great on it thankfully. The vid was very informative and I'll advise anyone to watch this if they suffer with the same issue and yes I spent a fortune on bulbs 😢
@@DaveHines Yeah, it's an often missed problem that few seem to know about. Thanks in advance for sharing.
Why trying to have the blurr box over just some clutter in your garage. It’s more distracting than the clutter 😂
So sick of brighting people with my highbeams on
HUH❓ I'm not 'getting' your point. Is it me?
@@CycloneCyd no it isnt you at all....i was just saying how my headlights on my Infiniti are soo dim that I have to drive around with my highbeans on, then other drivers flash their highbeams at me.
I will never buy another car with projector lens. It is a deal breaker. I cannot even buy the replacement part except dealer that wants $1200 each ($2400 total). My car isnt even worth $10000. Horrible nissan junk
You're entitled to cut your nose off to spite your face. It's your 'right'. Anyway, LED is the future.