Military Paint on a Budget!
Vložit
- čas přidán 14. 06. 2017
- How to paint a military vehicle on a budget.
FYI - Never use a color mix code on the lid due to the formulas changing over time.
Home Depot paint to use: Behr Premium Plus (or better) Exterior Flat paint.
Home Depot Paint Codes:
Have the Home Depot paint sales associate input, "Federal Standard" as the manufacturer under the, "Competitor Color Lookup" then have them enter the 5 digit color code that corresponds to your desired color below. FYI - The CARC green and brown colors are designated with the, "383" in the name.
DesertTan 686A - 33446
Sand - 33303
Dark Sandstone - 33510
Earth Yellow - 33245
Field Drab - 33105
Earth Red - 31090
Brown 383 - 30051
Olive Drab - 34088
Light Green - 34089
Green 383 - 34094
Dark Green - 34082
Forest Green - 34086
Black - 37030
Aircraft Gray - 36300
Aircraft Black - 37031
Aircraft Green - 34031
Interior Seafoam Green - 24533
Twitter: / deuceandguns1
Amazon Store: www.deuceandguns.com
Facebook: / deuceandguns
If you enjoyed this video please give it a like and be sure to subscribe for future channel updates as I plan to put up a new video every week. I’m B.C. and welcome to my channel Deuce and Guns! - Zábava
Here are mask and filters you need for CARC paint removal and it's only $16 for the entire setup. amzn.to/2upwtDz
Thank you so much for helping us B.C.
Thanks BC! All of your videos have helped a lot. Now if only someone had a video on a M35a3 CTI system!
In the old days, we just treated the rust with zinc chromate and they touched up the OD paint with a paint brush. The white stars and bumper numbers had to be touched up with white paint every 3 months. Stenciling had to be blocked, no gaps. In late 74 we went to camo. Initially, the trucks were sprayed by Installation maintenance. Stars were no longer used and bumper markings turned to black. After that touch ups were done with a brush.
Thanks for the info, that's very helpful. One of the layers of paint on my truck may be from you!
I’m so glad you did this video. Plus i’m Glad to see you preserve your Duece . I love your Duece videos.
I’ll watch them over and over again. Your a very big help to us. I’m ordering my bobbed Duece tomorrow for real. It will be from Boyce, in Utah But it’s not going to stay new forever. I appreciate all the help you can give us. Thank you one again B.C.
thank you so much!! man you are so helpful. I went off road and tore up my battery box, and step. now I'm more confident on the paint. keep em coming, stay safe brother!!
we used paint brushes to apply paint to our jeeps in TOW Co. back in 1980 USMC. glad to see you give that truck some love...good work.
I painted many trucks and M113 tracks when I was in the Army. We always said "OD" paint stood for over dirt.
the John Johnson Co. in Detroit, Mich. will still make you a BRAND NEW tri-color vinyl bed cover. talk to Mike in government sales.
mine was $885. Delivered to my doorstep.
Dude that color list is perfect! and corroseal been using it for years on all my old rigs worth every penny!
Didn't know I could have the Homeless Depot match military colors! Awesome stuff!
B.C. love your channel. after seeing this I was inspired to camo paint an homemade enclosed trailer. thanks for all the Federal Standard color codes, BTW Sherwin Williams will mix the paint for you. Used a tinted primer, Desert sand. Green 383 will be the base. thanks again for the info.
Just randomly found your channel, and so glad I did! I've spent the past two hours looking at some of your older videos. Great stuff! I love the way your present yourself with clean language and tell it like it is commentary. Are you in East Tennessee? I'm a born and bread East Tennessean. I live about 30 minutes WNW of Knoxville, lived her all 53 years of my life. Subscribed.
I agree, well done but we want more, ha,ha,.
You remind of the weekly maintenance work we did on our vehicles in the Motor pool yard. USMC
Super awesome video brother right to the point keep up the good work.
Awesome video! And how to go aboit getting the paint is awesome piece of info. Gonna have to use it for other things that I want to paint!
Wish I had a military vehicle - love your Deuce videos.
You always make great info videos on the deuce
Already passed this video on like I have so many of your other deuce vids
I have this channel because of viewers like you. Thank you.
bc you are teaching me so much thank you for all your info
@@deuceandguns would you ever make a video about driving a deuce in the snow??
I love the deuce. I want a military surplus truck one day, though probably a newer one like a M1088 or 78. They seems a little more road trip friendly, which is what I would want it for.
At least thw roads down south arent as salty as up here in northern New Jersey! My truck was pretty rusty when i got it, but now that winter has come and gone, i see light through alot of the rust spots now! But anyway, Love your videos man! Hope i can eventually have my channel become nice like yours!
Thank You for your time, from Phoenix Arizona ;
The bed looks really good. So good I'm thinking of painting my 1998 GMC Suburban with a roller. ;D
YES!
I've always been a big fan of Rhino Lining or Line-X or some other commercial truck bed liner product to paint the interior of the bed.
Very cool BC. Thanks for sharing the info!
Brings back memories.I monitored the spray booth process at TEAD army depot in the late 80's for CARC.I'm glad to see you are aware of it!
I had an uncle that developed throat cancer that painted lots of army equipment with CARC during his service and his wife later got lung cancer they think from particles of the stuff he carrier home. Shit's no joke wear the respirator when dealing with it.
I got an M37 that has been primed, I was thinking about this, thanks.
what's going on brings memories of the military days but nice to see there still around ,thanks for the vid, GO-VOLS nice touch but GATOR FAN!!! :-) :-)
G'day BC,.....Sorry its taken me so long to get to see this Video but great to see you looking after your Deuce and taking care of the rust.Its one thing I hate with a passion. Another great video, I would have thought you would have used a larger roller to cover the bed base and the smaller roller to do the corners etc.Will be looking forward to seeing the rest of your handy work/repairs.Aussie.
That is awesome looks pretty good too👍🏻
Thanks. I need to get mine done!
Really good show man!
Rapco sells good paint in the cans to touch up. Then just spray it down with tire shine. Next day it will look brand new. CARC loves tire shine.....Nice videos
Rapco sells very good stuff but I wanted to keep it as cheap and easy to touch up as possible without having to store cans of paint. Also, I like the tire shine idea and it reminds me of a story my dad told me. I'll probably tell it again in a future vid but here it goes. While dad was stationed in Vietnam he and one of his buddies was washing up the M35s they had and his buddy decided to rub diesel all over the deuces he washed to make them shine. When his CO saw that he got chewed out and made to rewash all the trucks again because you don't want to stand out with a shiny truck when the VC are around.
Looks great!
Thanks for the info , I have a 1985 M923A1 5 ton and need paint touch up. I talked to HD last year and the Lazy paint sales person would not help me. NOW I have paint codes. Thanks
another great video!
can't beat acrylic 'BEHr' exterior paint!
I have done a few.
Thanks for the video!!
Great vid thanks for sharing 👍🏼
had a guy down here in Florida get 2 deuces, painted both complete with rhino liner, one in od green and one in a blue kind of color.
great info, thanks
Gillespie Coating products (GCI) makes your favorite OD shade in an Enamel in flat or Semi-flat for $40/gal
Turned out great. Someday...
I once heard some stories from a guy who worked at BMY in the early 1990s building the M939A2 series 5 ton trucks. He said cyanide was a byproduct of the CARC paint, he was told as an employee to basically run like hell if the 'fog' was seen coming from the paint booth.
Can't thank you enough. Cheers
That truck is so cool. You could do an Aerosol overhaul also. Lol. I know rustoleum doesn't make the right paint color but would you have used rustoleum paint if it was the right color?
love that music!
not sure if you already have but do a video about what you use your deuce for! You talk about how you use it as a work truck. What exactly do you do with it? Take us for a ride with you! Gotta give the girlfriend a list of things i can do with it to convince her haha
In reality I don't use it for anything I couldn't use my F-250 for except for getting to hard to reach locations on the farm and looking awesome at Home Depot. It's used for simple farm type duties such as hauling and fixing things. There are months that go by without it being started and then I'll have her out several times a week for a while. Just get your girlfriend watching The Walking Dead and explain the survival and multi-fuel abilities of the Deuce.
It's youtube and it involves a deuce. It might seem simple and mundane to you, to throw a log up there and drop it somewhere else, but to us its an adventure in the life of a deuce owner. people will watch it.
Anyway, can't wait for more deuce videos.
Excellent, I did a couple of 'BEhr' paint jobs too !!!!!
hahaha
They sell fiber glass rods for putting in your bass boat or canoe at any outdoors store they make a nice curve so you don't end up with a tarp full of water in your boat they come in 20ft sections. 5 of those plus a camo tarp, there's thousands of tri color designs on Amazon would probably work pretty damn good.
20 %muriatic acid (concrete stripper/cleaner) works great on stripping rust right off the surface of steel with no scrubbing, make sure to wear the proper gear while dealing with acid , gloves and proper mask are a neccessity. it does amazing results in under 5 mins. just be sure to neutralize the acid well with water. and do small segments at a time
damn i want a deuce and a half
Me too!
Barry Allen Me three!!
Robert Carey me four!
Hey get one, by golly I’m finally getting mine! Ya-Hooo !
Me five.😀😀😀😀😀
Nice video,great job man👊😎
Hey,where can i find that grey paint; Like military C-130J ?
Am in the search for my jeep.
Thnx!
How has the paint held up since its application? Rust is a real pain in the butt to deal with, I hope you got it all.
Sweet thanks !
If all goes well I will be driving one with in a few weeks
You should have tried chassis saver instead of corroseal. I've used both and the chassis saver is far superior. It's also approved by the U.S Millitary and the DOT.
Awesome info. Thank you. I'll remember this for next time/when I do the rest of the truck.
Approved by Ted Negent as well.
I used Testors, but on a 1/100 scale.
I drive my M35a2 TO Home Depo... gotta park a little further out. It gets more attention than a new 80k$ dually!
I did that when I rebuilt a deck. Feels good to close a tailgate on 12ft lumber.
can you name this serie
so you wanne paint your deuce and a half
another hack....
mix rustoleum dark hunter green with rustoleum rusty red metal primer. Add the primer until you get the color you want. Then thin and spray or dare I say cut in and roll on with a foam roller.
New, used or a mix of motor oil cut with diesel will preserve the wood benches and stake sides.
I was wondering why you didn't use Eastwood rust convertor to a black finish and then put a truck bed coating as you said it's a work truck.but I did it to my stake and dump beds,and beds,are dull but no rust
Can all the colors be made in an oil base? Unless one has an airless paint machine, can't spray latex though a regular automotive spray gun. At least I don't think you can.
Raptor liner would be good! Least expensive and easy to apply!
i live in Tennessee as well bro I'm from west Tennessee and I want a duece so bad
Where would you say is the best place to find them for sale?
Rhino liner (or something like it) for the bed and underbelly.
BC if you don't mind me asking how much did you pay for your m35a2 AKA deuce and a half saw video on Facebook ever since then I've been searching and researching these learning everything I can I'm wanting to get one but with me it will be my daily driver transportation why I don't know I just really really like them
How much would a deuce like that cost. I want one
I painted POR15 on my deuces beds, then body and frame. These anti-rust paints weaken when exposed to sun. That may have been your problem. Next time leave it under your shed to dry.
Im not expecting a reply but does anyone happen to know a primer that can adhere to CARC? I am trying to repaint my humvee with 1 stage Urethane.
what about making your own cover?
I wonder how some of that spray in bed liner would work on a deuce?
I thought about that but decided I wanted to be able to slide cargo in/out the bed vs. fight against the addl traction the rubber coating provides.
Good video. I've done a lot of painting on these trucks and trailers. I'm about to do a custom job on my bobbed deuce. I'm having it sandblasted then I'll use a red oxide primer. But I'm struggling to find the right shade of coyote tan I want for a camo pattern. I tried samples of Rapco, but I'm not satisfied with their tan selection. I'm trying to stay with an alkyd enamel instead of the Behr latex that seems so popular. What have you heard about enamels in MV restoration?
I personally don't know anyone who has used enamel. It's always been Rapco, Behr, or the real CARC ordered through Sherwin-Williams. I'm sure someone on the steel soldiers form has used enamel in the past though so they'd be a better source of info.
What's your SS handle? I've been on there for a few years.
It's probably been 5 years since I've last been logged in and I've forgotten my user name. I should probably start a new one at some point.
Nah. Not worth the drama, for me anyway. I just creep the pages when I need something not covered by the Facebook group. Are you a member of that? Much better group of very knowledgeable folks. Check it out.
So I’m about to paint my m1028 contact truck how has everything held up on the truck any peeling or anything you would do different
I'd attempt better rust removal and rust stop for the bed because that's coming back now. Any paint on top of clean metal is still holding up fine and it sits outside 24/7.
Is this enamel or latex based paint
Ok, I have a question.
Do you have the code for orange, ie, the orange used on vehicles for things like Project Iceworm where everthing was orange for visibility on the ice at Greenland?
Thank you.
While I'm not certain of the exact color code I have some good guesses and Home Depot can show you the color on the screen before they mix. I assume it's one of the Florescent Red Orange codes which are 18913, 28913, 38903, or 38905. The 18913 and 28913 codes are probably your best bet due to them being from the cold war era.
@@deuceandguns Thank you for replying. I'll check into it.
I'm going to be getting a Duce in a few months but I can't seem to fined very many where I live would you happen to know any place on the west coast? Thank you
Suh dude: I've been having the same problem. in different parts of our Country you'll find Different types of Military surplus offered. look up www.governmentliquidators.com and you'll see what I mean.
In California you'll find A lot of ammo cans from Oceanside,Ca then look for tools, tool boxes etc... comming from French camp,ca...In the Midwest you'll start to find A lot of Military clothing, battle packs,boots etc...Then on the eastern part of the country you'll find Military cars,pick up trucks, deuces, 5 ton trucks and wreckers etc...
There is a guy in Lucerne,Ca who has a website as follows. www.100dollarman.com he sells the military 5/8 ton diesel pickups,and 6.2 liter diesel Broncos, he does have some 5ton Cat powered trucks and he does have some deuces, he also customizes and "Bob's" the deuces but havnt seen many on his website in some time now, he also makes custome wheels for the deuce for the use of the super single tires. you may want to send him an email.
Eric Dee.
Great information thank you.
Boyce equipment in Ogden Ut. They have many choices and spare parts 👍🏾
I Get My Paint From SHERWIN WILLIAM They Have The Federal Standard Paint Chip Cards .
I really would like to see it repaired like it is not the try colors
are we getting a part 2
At this point I've only painted the bed because it was in the worst shape. When I do paint the rest of the truck I'll have the cameras rolling.
I really wish u would have put white vinegar n use that push brush to clear out some of that rust before u put that protection coat down. it's stupid simple it cleans completely rusted out cast iron pans it's white vinegar as a solution then use baking soda to nuteralize the acid n wash her out. got to love grandma
Western Tn?
I'm sure the 3M 2091 filter will work just fine, but be aware that the 2097 filters out the same size particles as well as nuisance levels of organic vapor. I don't know if the CARC paint has much odor but if it does or you know you are sensitive to such things, you may find the 2097 works better.
why not rino line the bed.
Charles Edwards my thought but maybe because it's so costly and it takes a full 24hours to dry youd need a really big car port to keep everything bug free bugs go jnto the lineing
Because that would cost over $2,000.
Sparta I actually did the math for doing it yourself comes out to about 830ish to 900 for the bedliner kit and the refiles and prep supply's 200 for the plastics and tape and the mask and the gloves
You could just use Rust-Oleum and repaint the whole truck
Wagner power sprayers are cheap, and much faster. Rustoleum paint provides better rust protection.
You should Rhino line the bed
I was thinking about that.
Rust-Oleum make something similar I'm sure it's cheaper
honesty I think when I finally get one of these trucks I'm just gonna rinoline the whole inside of the bed. It will be black and not match factory but it will last forever
I've thought about that as well. FYI - There are spray on bedliners that can be tinted like paint.
Unless you drape it too hard. I'm not a fan, the right set of circumstances and and little rust underneath can ruin the whole undercoating. And it is a shitballs thing to remove, I've been trying for months
you used the wrong shade of orange on your truck
For a brief instant I considered official UT Big Orange but I spent a year in the UT matching band and 5 years on the University of Tennessee campus. I'm still ok with a color other than orange but will admit that it's starting to creep back into my life.
Next time use desert tan color
Make your own bed out of metal wood and fiberglass..
Машинка супер хочу обкатать эту малышку
1:34 - 1:59
3:59 - 4:18
5:19 - 5:34
I'd talk to these people and get one made the way you want it. grillwraps.com. Not a grill, but I'm sure they can whip something up.