I'm Not Getting Much Output From My Subwoofers | Car Audio Q&A
Vložit
- čas přidán 27. 10. 2015
- This is a question we get a lot; "I just installed my car subwoofers but I'm not getting a lot of output. I see them moving but I'm not hearing too much."
If you have two subwoofers and you're experiencing this problem chances are your subwoofers are out of phase. This is a simple wiring issue causing the subs to cancel each other out. Basically your subwoofers are working against one another.
Subwoofer Wiring Diagrams:
knowledge.sonicelectronix.com/...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sonic Electronix always strives to be the premiere online shopping destination for car electronics and other consumer electronics. Our slogan is "The X-Factor When Shopping for Electronics" and it is our goal to be just that. We're here to help you find solutions and great prices without sacrificing service.
Our Store:
www.sonicelectronix.com/
Our Facebook:
/ sonicelectronix
Our Twitter:
/ sonicelectronix
Our Instagram:
/ sonicelectronix - Auta a dopravní prostředky
Shout out to the NEWBS! We were all there at the beginning. And videos like these taught me so much. So glad you guys make videos. Wired up four TXX-BDC2-12s dual 4 at 2 ohms. On an APCLE30001.D.
These Guys at Sonic are Great I mean in this day in age all Companies should be doing Tutorials like this Especially Online retailers that don't have the Luxury of personal Service I really dig that
Thanks guys
P
@@tonem1181 LMNO
I bought a nice used custom box with a massive audio hippo sub. Took it home it sounded like crap. Removed sub and it was wired crazy. Wired it up correctly and it was violent smooth bass!
Thanks this video helped me a lot. My subs p3 Rockford fosgate where not wired right then I wired them how they are suppose to and now I get strong bass.
i had mine hooked up this one time and i notice the same thing and i just switched the main output wires around and they really made a difference. btw they are 2 12 inch l5 dual 4s
You should also check if the ground is connected securely to the chasis. You lose power and clarity if the ground is lose.
Alan, I agree with what you said, important when someone is new to learning something that you show them respect as we were all there once. But let’s not forget that if you are the person that is new you should show respect to those who taught you something new. For instance, let’s say you were completely new to fabrication, you learned a ton from someone else’s CZcams channel, and then started making your own videos showing the same exact thing…. but without giving a proper shout out. That wouldn’t be showing very much respect would it? I think it’s important in this small community for us to all show respect. Something for you to think about…
Thanks to you my neighbors hate me again you’re the goat 🐐
🛑I had this same issue with my system, I solved it by adjusting a setting in the head unit, the 'subwoofer level' was at zero, which I thought was similar to bass boost so I didn't adjust it, but after contacting kicker because I thought it was my amp, I was told that it's not a bass boost and I should turn it up and re-adjust the amp gains and it worked flawlessly.
What head unit do you have? I've been curious about doing that with mine..
@@kristopherdonaldson9569 pioneer avh 221ex
I have a pioneer as well. So, what did you raise it to? +5, +7,+10?
@@kristopherdonaldson9569 10. then re adjust your amp gains by turning it down or by use of multimeter
@@doublemanson alright, I'll give it a try as soon as the sun comes up..
I had the same issue and it was because of a broken speaker wire inside of my concealed box. Fixed that and bass works. Double check your cables.
Is their another link for the wiring diagram? I’m trying to put two dual voice coil 10s but the link doesn’t work for me
I would've killed for a video like this in the mid 90's when I was in highschool trying to hook up beat in my buckets.
How to test phase. Get a double or triple A battery, touch positive end of battery to positive of wire and negative to negative of wire. If both speakers pop out, congrats, you're in phase. If not, then your not. Dont hold it there for too long cause you could risk overheating the coil.
U helped thanks bro !
What's the best slim truck subwoofer? And how much power is adequate for a 10 " subwoofer
Mine is doing the "out of phase" so I wired everything up but used some wires that didnt come with the kit, which is very skinny like factory stock skinny, and I wired both my 6x9's with that wire to my 400watt boss amp. Could it be that I didnt used Speaker Wire? Or is something actually wired wrong
My question is two rgbs comes from my sub to two line outs (red and white) from my amp. But my mate said I only need to wire one line to sub not two? White to left channel of sub which is mono anyway..is this right. Only that I tend to find my sub cuts out at quieter levels?
Thanks..steve
hello sonic.i have a question about stiffening caps, actually I got a few. 1 how does a cap discharge power. does it only discharge what's needed or the full load of what it's rated for. 2 I have a 500 wat alpine amp but I'm still getting the whole dimming n amperage drop and I have a 4 farad sound stream. I'm aware of the rule of thumb of 1 farad per 1k wats so i was also wondering if I hooked it to my amp would I potentially damage my amp. don't kno if it makes a difference but I have my subs wired at 2ohms. thank you for your time and insight it's very much appreciated.
I have 2 8w7ae wired series circuit. What's the bet amp to push them where I'm going to get the most power but also the best sound quality. I have a 500/1 slash. But it's older one and I want to upgrade. What amp should I get ?
So can I just plug 3 4 ohms svc directly to one channel to get 1.3 ohm load or does it have to be amp to sub, to the "middle" sub, to the last sub?
Nice diagram and drawings. Surely you'll have an app out if you don't already. I use RF's. Also I installed one of the HiFonics Brutus amps in a vehicle. It would be helpful to explain what all those nice knobs do.
But you know another thing is that he might have his woofers in a sealed box and most people don't know certain speakers do not perform well and seal boxes I always recommend ported because when you build a sealed enclosure it has to be the right size specs for that speaker and most people just buy a box and just throw some speakers in there just to have sounds and then come to you the technician and ask you why is it not right first of all you got this big ass amplifier on two 10 inch subs in a sealed box and is going to sound okay but you get used to it a lot faster and that's a lot of people problem I recommend Port it because you don't need as much power they can take the power but the sound is just more dynamic when you can move air some people just don't know what they have a lot of times and a lot of people be having good equipment but sometimes I have to be honest it'd be alot of the shops just trying to make the quick dollar instead of explaining and giving a customer what they want instead of just throwing something in their car most people will pay for what they want but you give somebody some b******* and put it in the car and then you get responses like you are receiving today and I'm not saying all shop but it's a whole lot of them this just about the dollar instead of the love other music and the installation game I never said don't make your money but if you know this speaker and this amplifier is some b******* why sell it to the customer unless they say I want something cheap
I have 2 12” in a box like that, but there’s only one area to plug in my speaker wires on the outzide when my 2 10” had 2 seperate thingz for the speaker wires, do I uze both pair of wires into the one connection that my new 12’z have or just 1 pair of wirez
Dude sound chill af
I try to help people in the comments sometimes that haven't had a reply to their questions. Car audio can be difficult to help people with just by communicating on CZcams. It's hard to diagnose someone's problem when they cant relay the information properly and dont understand what your saying. I try tho because I've been there myself so..
@@_bauer thanks for the kind words. I looked up your amp and speakers. Very nice stuff but to be honest with you😬 I would have bought 2 Rockford fosgate p3d410 and a pioneer GM-D9701 and saved $860🤷♂️. The t1d210's you have are 2ohm DVC. Wired parallel you going to get .5 ohm load off amp. Your amp isn't rated for a .5 ohm load. You should have bought 2 Rockford fosgate t1d410's. Wired in parallel to get 1ohm from amp. 1600rms@1ohm is what I seen rated for your amp. You should be wired in series with your current subs. Bad part! You only going to get 700rms @ 4ohm from your amp. That's why its important to correctly match amp and subs. So you don't waste money on expensive amps and subs that you can't use to their full potential. I'll leave a separate comment about your radio 👍
@@_bauer Ok, your stock radio is probably holding you back. Idk anything about a stock 2020 Honda accord radio but a aftermarket radio would better. I'd recommend a pioneer double din. One that has (NETWORK MODE) and Navigation and steering wheel control capabilities.
(LOC) LINE OUTPUT CONVERTER I'm guessing. Again, dont know much about them. I've never used one because I always use aftermarket radio with amplifier and subs.
As far as hardly any sound from your system. It could be a number of things. I would make sure that your wired correctly first. You may have mixed some speaker positive and negative terminals the wrong way by accident. I do it sometimes. I would go to a shop and ask them what they think. I'd recommend selling your amp or subs to get the the proper amplifier/subwoofer combination. Your probably better off selling the speakers. If your going to have 2 DVC subwoofers. It's best to go with 2 4ohm DVC subwoofers if your amp lowest impedance load is 1ohm. If your going to use 1 2ohm DVC subwoofer. Then get a 2ohm subwoofer DVC and wire in parallel to a 1 ohm load
@@_bauer let me know if you have any more questions👍
@@_bauer you may have a factory amplifier from Honda in your car. If so, that could be why your system isn't working properly. I just remembered you talked about your box. If you have a trunk instead of a hatchback style car. A sealed box is probably best for a trunk. Ported is usually for open cabin spaces. Like the back of a SUV or hatchback car. Did you buy a proper size box for your subwoofers? If you dont have the proper air space for your subwoofers. That can affect the amount of sound you get out of them.
I had a lanzar opti 2000 wired at 1 ohm. It was loud without any type of bass boost. I order a sundown sae 3000 watt amp. When I was tunning the amp it doesn't hit hard unless I use the bass boost. I dont understand what changed? I shouldn't have to use the bass boost.do u believe there might be an problem with my rca or my loc
buen video
okay so I have a question I have a rare vintage early 90s 18 inch Rockford Fosgate xlc I believe it's 8 ohm at 600 watt Max I'm pushing it with a boss 2400w amp before I switched and wired it to bridge mode it would not heat up the amplifier the amplifier always remained really cool down but when I went to Bridget I noticed that it was really heating up my amplifier why is that
Yoo thank you soo much
I got a problem i have all installed but i noticed a big problem in a small component of my amplifier ( this is an amp that is full range and lowpass filter) and i use it for bass well while playing sometimes i have loaded my car with bags ect and i stoped hearing low freq so i noticed( that switch for low filter may be damage what can i do ? Can i get a spray or should i send it for repair its an old amp .500watts
My kenwood single din player,on the rca output for the subwoofer there is no sound coming out,but wen i tried the rear n front output i get sound....checked all my wires n fuses and everything okay
can you connect two different brand name car amp together and how to
Hi is there a link to wiring 4 dual 2 ohm speakers to 1 ohm....amp is 1 ohm stable 2k watts....speakers are rockford fosgate p3 d3...12 inch....any guidance much appriciated
I need some serious help with my subs. I have no clue what settings or what settings I should set my amp at. I'm so lost. My aftermarket head unit has all these settings on them, and idk if I need them on or not, and idk what any of the dials and switches do on my amp. If you could help me, please get a hold of me.
Please explain and possibly demonstrate the use of the PHASE SELECTOR switch or knob on a crossover.
you can pop test with a 9v batt.
+hittin-low_150db+ I think you misunderstood what I was asking, a pop test determines negative or positive by the speaker popping in or popping out.
let me be as straight forward as I can be, I got a clarion MCD360 3 way crossover, in the subwoofer section there is a switch labeled PHASE which can be set to either 0° or 180°. Please explain and possibly demonstrate the use of that phase switch.
+Dane Brown ohh yeah it just reverses the polarity...play a rock/punchy bass song and switch it to 180 the woofer will suck in...but if its 1 woofer or multi. in sep. chambers it wont make a sound difference
Believe it or not the sub phase can be out of sequence of the rest of you stereo system. Meaning the sound takes a bit longer to catch up to the rest of the sound coming out of the other speakers, so you flip the switch in order to work in sequence with the rest of the system. Almost as if you reverse polarity for the speakers. This is beneficial when using multiple amps and different speakers firing in different directions. You can play with the phase switch on each amp to achieve the best sound from the stereo system.
It could also be a reflected wave that is out of phase. In which case moving the box, or opening the trunk will show. I see this more than I see wrong wiring.
I just installed a JBL BASSPRO HUB in my subaru crosstrek and this looks like what I am experiencing. Can this problem occur using a single sub with right and left high level inputs? I could really use some advice.
Can lack of power make my subs over heat and start smelling? I have 2 batteries 1 is a regular battery in the front and the other in a marine battery in the back.
what happens when you have a dvc and have onc v/c correct and the other incorrect? does it just not move?
i got a Question to i just bought 2 skar 10 sdr series subs in the box and got them hooked up right they work just fine on low volume but when i turn the volume up they start popping like there's not a good ground or not good power output idk? do you know what could be wrong
Diagram coming in handy 8 years later
i have a kicker dx1000.1 on a t1 10 and when i turn it up to a certin level the amp turns off then turns back on and before the stereo would shut off to but now its just been the amp any idea
I have a 740 watt pioneer amp and a kickercvr 12 and ik I wired it right at times it hits hard perfect other times you can tell when the bass drops it just gets quieter but not like distorted or nothing just quiter and theres a dramatic difference my amps not going into protect or seem to be getting hot it's wired at 2 ohms ATM I tried wiring at 1 ohm and 4 ohms and all does the same thing no matter how I wire it so I bought a 2.5 farad capacitor thinking that was maybe the problem tho it's stopped my head lights from dimming the bass still does the same thing and had no effect on the amp it remains anywhere between 13.8 volts to 14.2 so ik its not the voltage going threw I have 8 gauge wire going from the amp to speaker and the rest power ground wire are all 4 gauge I don't believe it needs anything bigger for a 740 watt amp tho it is older still I don't see it putting out any more than 1200 watts (and yes my ground wire is grounded good sanded it down to bare metal and have 14 bolt that the ground wire screws on) any suggestions on why this is happening?
I have 2 American bass xr12d4 on an American bass ph4000md wen I turn the knob up it's then it goes out then comes right back on is it cause I dnt have the battery on it yet
Will the length of my jumpers affect subwoofer output ? I left the jumpers really long i have 2 dvc 4ohm parallel to 1ohm
What gauge wire and is it real copper or copper coated aluminum
i have an amplifier that can output 235W rms at 2 ohm and 470 at 4 ohm bridged. but the sub that i want to get is 4 ohm dvc. i cant run it at 2 ohm bridged. now at 8 ohm will it move much, or better to wire it up for 2 ohm with 235 w. the sub is rated at 400wrms. pls help
I got a problem i hooked my brothers stereo up to my car. Same kind of car 2006 scion xb. I also installed tweeters, connected to the front door speakers. But my 10 inch cerwin vegas wont hit. Just the the right one. Wats going on??
Really dumb question and I think I figured it out gunna try after work but this is how my subs wired rn. Amp ( - ) two wires running to each ( - ) on each sub. SVC btw and then I have the positive running as if we're parallel. My subs randomly worked for 5 or 6 hours then next day they don't work. They work but sounds like shit and slowly cuts in and out. Guess that's the issue cuz I checked everything else. Any thoughts?
I have a sundown audio zv5 18" sub and I have 8 gauge wires for speaker wire. My amp is a sundown sae2000d so it definitely cannot shove the speaker anywhere close to max. It use to be extremely loud then while it was playing it seemed to loose the output it had. No power lose at all. Wiring is still the same at 1 ohm. Why does it seem like it has a higher resistance?
Test the impedance with a digital multimeter. It could be partially "blown"
I've got my gains, and bass boost dials turned all the way up on a 1500W BOSS amp, hooked up to a single 400W Kicker Sub, and it works, but hardly kicks like it should. I wired it through my factory speaker wiring, but I feel like my factory wiring is somehow limiting the output of my amp.
That’s the problem I’m having now. Did you by chance fix it and if you did. How did you fix it?
did you fix the issue ?
@@7400_sparksum no I never ended up figuring it out, got a new ride. Need to redo the whole setup
I need some help. PLEASE
I just installed 2 12 inch subwoofers P3 rockford and a rockford 1200x1 amplifier and I correctly wired them down to 2 ohms each and down to 1 ohms to amplifier. yet I still not hearing much unless I purposely turn the gain all the way up and the punch eq on it all the way up. But the manual that it came with tells me not to do any of that. If I turn it down below level 5 gain I can barely hear the subwoofer. I checked fuses, wires to the subwoofers and got 1 ohms to amplifier. Also the bass knob that it came with did absolutely nothing to help with the bass, same with the settings within my stereo that allow me to turn up the subwoofer. .5/10 if rating on a bass scale.
Hey I have a question okay I got a nvx jad 1200 at dyno test it does 1300 rms certified I had a nvx vcw 15 1000 rms dual 2 ohm hooked up and hitting good but I took the sub out put it in a different car with a cheap power acoustik rz1 2500 only rated to be 2 ohm stable at dyno test of 630 rms at 2 ohm but it runs at 1 ohm no problem so that nvx 15 dint last 40 mins with that amp and it blew so I’m guessing either that amp does way more then 1300 percent me at 1 ohm or I have an electrical problem with my nvx amp that causes it to not run the potential wattage but I have a a second battery and the power wire I know is good power stay at 14.0 volts so could a bad ground cause the amp not to reach its potential
My question is how to get bass where I like it. I do not like the very low deep electronic bass. I want it to sound like being in front of a live band. Like a hard-hitting PA speaker. Many years ago I had 2 EV15b in a TL606 enclosure in a large SUV. Loved the bass sound, but do not have the room for even one 15 inch speaker and also know the sound can be tuned up using the right enclosure, but not sure of where to start. I am guessing I need something tuned to about 65 - 80 instead of 35hz. I may play with the subsonic filter to limit deep bass but not sure of that approach.
Ok so if it’s not a polarity problem and if the subwoofers sometimes are at full power and then other times it’s really weak....what then is the problem
Amp goes off after rca is hooked up.. Can unplug and plug back up and come on for maybe a couple seconds then right bCk off.. Bought new rca cord and it still doing same thing
How about some love for the moderately not-so-newbie people. How do you design an efficient subwoofer enclosure with very little box rise. Sometimes just having a 2 cubic feet enclosure to a single 12 per manufacturer spec just does not cut it output wise and when you clamp test it, it rises to 4 ohms when wired to 1 ohm, sometimes higher depending on the frequency played. How are these other people building boxes with less than .5 ohms of rise, wired to 1 ohm and rising up to only 1.6 or so?
I need help with something, I'm having a problem with when I increase my volume on my live sound system, the bass doesn't keep up, hard to explain.. I have a 18 inch sub and 1 15 inch top, a simple RadioShack pa speaker and a jbl 2269h driver in a box of course. Do you have any idea why my bass decreases a little the louder I go?
Are they all run from the same amp?
My problem was my bass boost and Gain on the amp and not having my sub output turned up high enough on my deck
Can you make a video of how to check rca cables
Bro plug your phone straight into the amp with a headphone jack to RCA adapter. If it sounds fine your amp is fine . Pull your radio out and plug a new RCA into the back and run it over your seats to the trunk and see if you get Sound. no need to hide it all under the carpet yet until you verified your new cable is good. if all else fails your radio is probably fucked
Is it possible my little car isnt providing enough power? Its a stock battery should i upgrade my battery?
i brought a Samsung surround 3k system but my subwoofer is not working i think it may have a short in it ,it is a 2016 model how can i buy the Samsung wiring for my subwoofer
I got my 2 12's in a ported box with separate Chambers how do I go about wiring my svc 4 ohm subs down to 2 ohms on outside of box?
If the box has two terminal cups just get enough speaker wire so it reaches positive to positive and negative to negative on the box. Then add one positive wire and add one negative wire out of that any terminal to the amp should drop to 2ohm
[• •] ====[• •] positive to positive negative to negative on the box and then get on positive from one terminal and one negative from the other and run it to the amp AmpAMP
I had one 10" and an amp and it hit really hard so I decided to upgrade the amp and sub and get two 10" subs and they barely hit ik my wiring is good what could be the issue
You need a thicker wire. Higher the number lower watts it puts out. 8 or 4 gauge could fix ot
I just bought a phoenix gold amp and sub stinger wire kit. Custom made box. Alpine ilx-w650 radio, and it sounds like shit. I don't understand the settings on the amp or radio. It's deff wired right. But the ground wire spot sux, and idk. Need help! Please
where are you guys located
cant get any good bass very low bass i have a boss BV860B it says it coms with pre amp sub out do i have to have a amp ?
My sub is not hitting hard. Mtx road thunder. And I have pioneer gm 962 760w amp with pioneer deh-150 mp deck. Sub sounds super quiet. Barely hits even all the way up. Checked all my wires too... plz help. Installed in 94 dodge 1500
hi . i have a 12inch subwoofer and 1800 watt amplifier . it is suitable or not? please help me
So I hooked up hyfonics 3000 mono block amp to 2 twelves gravity g5 subs and when I hook both of my RCA‘s to the amp it seems like it cancels it out but if I pull one of the RCA‘s I hear some bass But then also my lights start flickering and then the amp goes into protecting mode
I might have a problem then. I don't hear any difrens when I'm inn/out of face!!
Had mine professionally installed it sounds great but my 12 barely moves atall no bass and it's a 3000w gravity what do I do
Play something like this
czcams.com/video/cB8oqVIIfZo/video.html
He didn’t mention this but laser aligning your speakers try it it’ll help you
I bought 2 used subs from my friend for cheap, one Knwood and one MTX both 10 inch, and they're wired to a 2000w Pioneer amp which is overkill but it was free. I don't have the specs for the speakers and I wired them both bridged out of one channel to both subs, and I have them pretty low so I don't blow them but they sound bad. I need to know either A). What's a safe power output for the max power without blowing them, or B). How can I find their specs, they're from anywhere mid-2000's to 2010ish. Any help is appreciated!
Bridged it's usually only 4 ohm stable
do you have a diagram for a single 3ohm sub? haven't been able to find one for my w7 8"
Crutchfield should have it.
A single voice coil or a one DVC sub? What are you trying to do?
the link doesnt show the wiring diagrams
I have a subwoofer two 10 inch 100 watts each and amp is tda2030 dual ic bridged for each channel transformer is 12 0 12 5 amps....normally its works fine and Good bass but higher volume level distortion starting like low powerd ...why...?
Hari K Nair bro. Pls use 24v 10amp most. Your problem will slove.
I have a question about ohms. How does box rise work? And is there a such thing as box drop?
bigger box bigger rise...and where the impedence spike in the box is thats where it peaks (hz)
+hittin-low_150db+ Yeah I know how box rise work. But i just want them to do a video on it lol. But the thing I don't know if theirs such a thing as box drop, I hear some people talk about box drop but really haven't seen it
+Subwoofer King if you open up your port...it will lower
Yeah one of my friends said he had 2 Sundown ZV4 12's wired to 1 ohm, and the impedance would drop to 0.4 ohms when playing. I didn't believe him at first
+Subwoofer King impedence dosnt drop....voltage does tf
I get output that ain’t bad but I have 2 Memphis 10’s on a 750w dual channel amp and in my brothers car with his wiring they work great in my car with my wiring they aren’t that great. I have to use fade to get them to hit and so with the fade it only hits on 1 side of the car. I don’t have a RCA on my aftermarket 300$ pioneer hesd unit. I used a line output converter.
or where can i get the Samsung wiring for it
question> i have a 1k watt amp and 1k watt subwoofer at 2 ohms at the same brand and 4 guage wire and when i turn up the volume the amp starts to smoke what is wrong???
Lmao dude.. Amp is fried.does it even output any sound
I got a kicker LT7 12 “ at 2 omhs with a hiphonicsBRX2016.1D and it not sounding loud enough! Got a extra battery and still not sounding right
U figure it out? I have same amp it bumps but not like it used too
When I parallel 2 eight ohm subs.Do I get 4 ohms or 16 ohms?
Jovian Heng 4 ohms in paralel, if you put them in serial you get 16 ohms...
switch way does the speaker go n a honda van
which ever sounds best to you. personally I'd try rear-firing first
What if you have to woofers wich got their own enclosure ? Meaning 2 x seperate boxes
That shit is dumb and pointless
i wired my 2 speakers wrong, 3:52 is how they should be right?
Amp:
Phoenix Gold R5.0:1
Octane R 5.0:1 Class A/B MonoBlock Amplifier
Subs:
2x Rockford Fosgate P210S4 Punch Stage 2 10" 4-ohm subwoofer
Rear Speakers:
JBL Concert Series 9631 6" x 9" 3-Way Speakers w/Grilles
Front Speakers:
Factory Speakers
Stereo:
Pioneer DEH-S4100BT in Dash CD AM/FM Receiver
amp is connected to subs only (im new to this so go easy)
I'm having a problem with my system if I plug in one of my RCA cables one of my sub works really good but if I plug in both RCA cables both subs only work at like half power do you know what is wrong is it the RCA cables is it the head unit or is it the subs itself
Did you ever figure this out?
@@madeleinewestbrook9228 sadly no
I can't find the link for the wiring diagram.
that box looks pretty sweet. is it prefab or custom?
+Timothy Hinton it's prefab i bought the same box but for 10" subs from them.
+Timothy Hinton Yeah, its a prefab Belva ported box
+sirlanceem what is the air space and tuning on it for tens?
Timothy Hinton Number of Ports 2
Tuning Frequency 40 Hz
Port Length 11.675"
Box Volume (Each Chamber) 0.71 cubic feet
+Sonic Electronix I checked it out.. it seems tuned way too high for my taste...i need something tuned around 32-35 after displacement..and 16 square inches of port per sub for two tens..do you sell anything like that? They want $200-$300 for a custom box
I’m having this issue, I got mine wired to 1 ohm and my amp supports 1 ohm. Could it be my electrical isn’t good enough to supply the proper power to my amp?
4ohm better
I have very low volumen from my subwoofer.
I connected from the factory stereo the sound to the aftermarket amp by the rear left speaker terminals (high input connection).
I think I have to check the polarity of that connection and benchmark the results. also after that check the polarity of the outputted signal from the amp to the subwoofer to see if I solve the issue.
ALSO maybe I can fix it connecting both the L and R inputs because I only connected the L.
If success I will show my results here after that.
Did you connect both of them bro ? Or any result did you solve the problem ??
@@0bslump629 Not at all. Sometimes like when the car is hot the sound is loud. In the cold mornings the sound is low.
I think is the ground. The bolt not well tight. in the heat that connection tend to tight and in the cold it gets loosen.
I will connect ground also to a second bolt what a mess.
okay, i have been searching information from everywhere and cant find it. on my pioneer (MVH-S320BT) has weird problem, i tried to measure that "pre out" voltage from the rca cabels and on the stereo own terminal and i get only 0.020V and i have tried other multimeters so the problem is not on tools. im sure everything is right on wiring and everything "should" be unbroken. im sure i have done everything right on measuring but sill doesnt get that 0.2V reading. i hope someone can give some answer for that. and my other problem in my amp (sd1600.1d evo4 2ohm) il have measured the out put voltage from that and i get only about 14V (AC) out, thats when the volume from stereo is 3/4 and gain is almost max but when i put some bass boost i get the max voltage out, what is promised on the amp manual. so far im thinking is that stereo low out put voltage causing low out put voltage to my amp aswell? thanks for help already!
Alrighty I’m confused now . How should I be wiring my skar VD-10’s paired with a skar RP-1200 ? I was assuming parallel but doesn’t seem to thump as it should sound 4ohm to 1 ohm in the box . Can someone send me which diagram to confirm
Please Help.. I have 2 12 L7's with a Kicker Cxa1200.1 had them in a 07 Jeepcommander Overland. They was STUPID LOUD. Now in a 12 Jeep GC Overland and not even close as loud. They was professionally installed. They told me they are loudER now. I know they are not. Please help
Theres a problem with my subwoofer box, when i hit it it some times works, but now even if i hit it it does not work :(
🤣😂 bro...u got us 🤣 that was gud😆👈
You guys still doing videos
A lot of people don't now what's Series and Other
I had my car subs they where working just fine until I installed a 4channel amp to my car door speakers but now my subwoofer dont even move.what could of caused it?
Your battery sucks probably and the second amp is pulling juice away from your mono amp
Maybe add a deep cycle batt to run the mono. What watts are they? Shouldn't be much issue there tbh iv run like 4 amps With no drops before
I recently switched out my old audiopipe 1500 apcl for a skar rp 2000.1 to go on my single 15 inch evl and the new skar amp seems to not have the output the cheap audiopipe has I then rehooked up the old amp and everything is normal and loud! sent the amp back to skar to test it they said its fine when I got it back I hooked it back up and to no surprise the same result the audiopipe is louder! this shouldn't be I went around with a dmm and everything tests fine im stuck!
Thats crazy. I have the same problems with the same exact amps. Still can't figure it out
Took apcl 1500 out. And then akl i did was lay the rp2000 in the same exact location, wired it up, and i don't get nearly half the bass response as i do from the apcl1500. If you solved the problem please shoot me a message and let me know!!!!
if the amplifier is not getting any player from the car radio what is the problem