As a master plumber I watched this twice to figure out how it worked. He's removing a compression fitting sleeve with the force of it's own nut. Genius leverage tool
Works well, unless the olive is over tightened as sometimes they are. Then the puller fucks up the copper and you can't get a new olive over the copper. So in a nut shell if the olive isn't over tightened just work it off with water pump pliers, saves going to the van getting your drill out etc.. But what ever works for you.
Agreed, I have one of these and it’s so easy, to add in case you don’t know, this is designed to remove an olive ring on a pipe that is difficult to remove. Excellent and saves you so much time when you need it the most
I've had mine for a number of years,the only difference mine doesn't have the option to use a drill,I emailed Monument if they could supply me with with the item but they never got back to me,never mind,still a great bit of kit.
Monument do a snip version too that looks like a set of pliers with a ring in the middle that goes over the olive you just squeeze and the olive is cut off in half. Easy thann this tool
Amazing but doesn't work when the fitting is overnighten and the olive creates a dent in the pipe. You also need to have with you a tool that can cut the olive
I had a helper that had one of those 20 years ago. It twisted by hand though. I didn’t believe it was going to work and he wasn’t sure if it would, but it did. I finally bought one about 4 months ago.
I don't get it. (USA😆) Will this work to remove a 1/2" copper compression ferrule? Or another term: compression cap adapter? Usually those ferrule are crimped down on the pipe so hard they deform the pipe. This will pull it and straighten the pipe enough to accept the hub of a new fitting?
@@TrickyTree84 solder or threaded. And union connection at the rad yes. Not that I dont trust compression, its just not what's mostly used around here.
Anyone got the link or the exact name of the product? Could have done with this a week ago doing 10 painted and as old as they come brass olives on 15mm copper 😢😢😢 Best regards, Scott. ✌️🙏✌️
@@fraserhoehle2256 Cheers mate. Finally found it. Ordered and pick up today. 😀😀😀 Used to live in Fife. Lovely place. Hope its good going up there for the graft. 👍👍👍 Best regards, Scott. ✌️🙏✌️
I just found out today after 45 years of struggle …. Monoblock kitchen taps Horseshoe backing plate manoeuvres from the top of the sink …. You put the mechanism through the top of the sink then tighten the Fucin nut underneath 🤷🏼♂️🤷🏼♂️🤷🏼♂️ .
I could have used you when having to redo the pipes for my radiators and bathrooms 😂 I bought one for these and it's amazing but now I'm done with all the plumbing I will never use this tool again
You’ve never come across an olive that’s been over tightened to fuk then…no getting them off with grips when they’re so tight they’ve cut into the copper
As a master plumber I watched this twice to figure out how it worked. He's removing a compression fitting sleeve with the force of it's own nut. Genius leverage tool
Errr it’s called an olive removal tool as removes olives
As a MASTER plumber am surprised you didn't know
@shaneshankly4518 You can tell you don't plumb at all. OP plumbs in Europe somewhere, commenter is from the USA. He translated.
Master you say
Looks interesting. Anybody got the English translation of this video?
Exactly!
Ha!
Exactly.. or subtitles
Yeah keep away from it legend has it it's 🤬 cursed
😅😂😂😂😂😂😂
Moments like that make you feel good about a tool purchase, that worked great
Works well, unless the olive is over tightened as sometimes they are. Then the puller fucks up the copper and you can't get a new olive over the copper. So in a nut shell if the olive isn't over tightened just work it off with water pump pliers, saves going to the van getting your drill out etc.. But what ever works for you.
Agreed
Agreed, I have one of these and it’s so easy, to add in case you don’t know, this is designed to remove an olive ring on a pipe that is difficult to remove. Excellent and saves you so much time when you need it the most
Only works if the olive isn't on tight , if it is this will damage the pipe
Great tool got 1 myself ✌️☘️
Had mine for just over a year and it’s still working like new definitely a good tool for your kit
Brilliant mate isn’t it
@@fraserhoehle2256 it’s one of them tools you didn’t think you need until you have one lol
Camon sir get a link up for it 🙏🏻
I've had mine for a number of years,the only difference mine doesn't have the option to use a drill,I emailed Monument if they could supply me with with the item but they never got back to me,never mind,still a great bit of kit.
Happy Days….. What a tool
You can also connect it to your impact mate it’s a lot quicker
Love your exuberance, my man!
Your chuck actually locks when you return twist one click after you tighten it.
No it does not 🤦🏻♂️
@@mattblundell5774 Twist back open. It will click into its locked position.
Nope, go look up how a drill Chuck works. That literally opens up the mechanism so it dosent lock
@@pipedgolf4634 don't buy your tools in a supermarket
@@roar40s every big drill manufacturer is like that
Yesssss Lewis Capaldi
Monument do a snip version too that looks like a set of pliers with a ring in the middle that goes over the olive you just squeeze and the olive is cut off in half. Easy thann this tool
Yes but situations you cannot get that in though
I have that tool, it doesn’t work every time, depends how tight the olive was squeezed on.
Noice! Love the automatic captions 🤣
Do me dirty every time
Looks loads better with the new head
Screwfix olive puller. Amazing tool. I don't use mine with a drill though.
Screwfix olive puller
Amazing but doesn't work when the fitting is overnighten and the olive creates a dent in the pipe. You also need to have with you a tool that can cut the olive
Hello mate, you could easily just ptfe the new olive. Still be a dent with olive splitters too
I had a helper that had one of those 20 years ago. It twisted by hand though. I didn’t believe it was going to work and he wasn’t sure if it would, but it did. I finally bought one about 4 months ago.
I used my Dad’s one the other day and said the same thing it’s really handy
Can u drop me a link?
"Battery gun" that's new to me.
great bit of kit
Thats class
av got one but it has a bar to screw it by hand , will bee getting one of them , nice one pal
I want this one do you have a link to this?
Where can we get this tool
I have had my years great tool
I love your enthusiasm
Haha thanks.. maybe need to tone the language down lol
@@fraserhoehle2256 definitely not your good!
Had mine for years. Has it turned by hand though.
Oh baby yesssss
Probably would of been easier with an impact. Not a combi. Just saying
That is absolutely fucking incredible
So good m8
Watched it 20 times canny get enough of it. Genius.
@@Frank-re3qp just posted a full CZcams video on my channel if fitting a toilet and it’s on that as well using it
Bloody brilliant tool pulls the olive off without damaging the pipe
I don't get it. (USA😆) Will this work to remove a 1/2" copper compression ferrule? Or another term: compression cap adapter? Usually those ferrule are crimped down on the pipe so hard they deform the pipe. This will pull it and straighten the pipe enough to accept the hub of a new fitting?
All well and good until you use it on a stubborn olive and it twists the copper in the wall!!!!!
😂😂😂
Dayuummm. I just use the old one 🤣
Got one, there brill, 15 and 22mm
Does the English One, still work the Same,? 😊
Does it pull it off or peel it off?
Pull
Im from montreal,
Compression fittings are pretty much the last option we use here. But awesome tool indeed
You'd solder a rad valve on? Really?
@@TrickyTree84 solder or threaded.
And union connection at the rad yes.
Not that I dont trust compression, its just not what's mostly used around here.
They're mint
Anyone got the link or the exact name of the product? Could have done with this a week ago doing 10 painted and as old as they come brass olives on 15mm copper 😢😢😢
Best regards,
Scott. ✌️🙏✌️
Hey mate it’s here www.screwfix.com/p/monument-tools-olive-puller-15-22mm/88681
@@fraserhoehle2256 Cheers mate. Finally found it. Ordered and pick up today. 😀😀😀 Used to live in Fife. Lovely place. Hope its good going up there for the graft. 👍👍👍 Best regards, Scott. ✌️🙏✌️
I have no idea what he said but I agree! Lol
I bought this cos last job i was on i had to saw the rings off. I've yet to get a job that i can use it on
That’s fucking mint mush 😂
Use milwaukee side cutters cuts olives off a treat
Can we have it subtitles in English
How do you use it for 15
I just found out today after 45 years of struggle …. Monoblock kitchen taps Horseshoe backing plate manoeuvres from the top of the sink …. You put the mechanism through the top of the sink then tighten the Fucin nut underneath 🤷🏼♂️🤷🏼♂️🤷🏼♂️ .
Yep hahahah mad isn’t it
@@fraserhoehle2256 Mate 45 years ❗️❗️❗️😂😂😂❤️
22mm side doesn’t work …. Good for 15mm useless for 22
Didn't work for me 😕
Cmon bro if you got it use it 💯
Can’t under stand a ficken word he said….made in America.?
LMAO!!
Dude I love, that you love your trade!!! -🇨🇦
😂😂😂
@@fraserhoehle2256
Lol, so much so, that you used the F word. Now that's a heartfelt endorsement of a great tool !!
'Battery gun' AKA Drill
Eh nu ok eye the new ..!
A spot of WD40 on the olive helps before removing it.
A what? Battery gun?
Lewis Capaldi is a plumber now?
I don't understand any of that. And I want one.
I think I've almost never not been able to get an olive off with a pair of grips in less than 10 seconds in 20yrs.
I could have used you when having to redo the pipes for my radiators and bathrooms 😂 I bought one for these and it's amazing but now I'm done with all the plumbing I will never use this tool again
What brass olives I don’t think so
You’ve never come across an olive that’s been over tightened to fuk then…no getting them off with grips when they’re so tight they’ve cut into the copper
Was that a flare fitting
No mate just a nut and ring for an old danfoss rad valve
Looks like a soldered 10 - 15mm reducer
I prefer to piss about with an old hacksaw blade and flat head screwdriver for half an hour lol... looks 👍
Man after my own heart 😂😂😂
Shame about the bad language 😢
Where's the link?
Screwfix buddy Its on there website
@@fraserhoehle2256 what’s it called you nonce
But what is the exact name buddy as I can’t find it on Screwfix app??
Best regards,
Scott. ✌️🙏✌️
What on earth is this language.? Blah blah blah--
What's he bleeding saying!
😂😂😂😂
lol
Brilliant screw fix finally good for something
😂😂👏🏻
Where can I buy
Screwfix mate
Or just cut the olive off with a junior
Junior hacksaw
Why cursing?
Makes you sound less smart 🤔.
Maybe try learning more words so that you can be able to explain your videos better bro.
Apologies dude, trying to stop it. Not easy when it’s basically part of me for so long
He is Scottish. It’s basically punctuation.
Cant UNDERSTAND a word your saying mate!
No need for the Language hey.
Oh yeah there is
Looks like a compression fitting. Nice, but your language is not! Jim
He's scotch
Where do you get this one at
Screwfix bro
monument olive cutters are the way forward mate much quicker
"Battery Gun" just chew the olive off.