Battery Options & Upgrades - Mototec Dirt Bikes - make it faster 36V to 48V

Sdílet
Vložit
  • čas přidán 10. 06. 2024
  • Link to Battery: s.click.aliexpress.com/e/_DFj...
    Link to Battery on Amazon (same battery as AliExpress): amzn.to/48gI5LL
    Link to Heat Sink: ebay.us/qY6S2z
    #mototec #amazonfinds #aliexpressfinds
    Chapters:
    0:00 - Intro
    1:12 - Removal of old battery
    3:07 - Install new Battery
    8:30 - Heat Sink Install
    10:06 - Speed Test
    mototecusa.com/index.aspx
    electricrideco.com/
    www.venommotorsportsusa.com/
    FTC: Some of the products linked above use income earning auto affiliate links, which means that if you click one of the links and purchase a products, I could receive a very small commission (at no additional cost to you).
  • Auta a dopravní prostředky

Komentáře • 49

  • @omnipresentvideo7686
    @omnipresentvideo7686 Před 3 měsíci +6

    Idea for foam support: put the battery in where tou want it, then, put a plastic bag (retail bad like Target or Walmart) and use expanding spray foam inside the bag. Might be a little messy but you could tape things off.

  • @DogMania
    @DogMania Před 3 měsíci +1

    Great video!

  • @MacFarlane123
    @MacFarlane123 Před 3 měsíci +1

    nicely done!

  • @oldmanebikes8392
    @oldmanebikes8392 Před 3 měsíci +3

    That heat sink is not going to do much without you adding thermal paste to transfer the heat to the sink. Always use thermal paste with heat sinks.

    • @BRichSolution
      @BRichSolution  Před 3 měsíci +3

      Thermal paste good idea. Without the paste I saw 20-30F lower temps compared to without heat sink on 48V razor
      czcams.com/video/jizGMurwUSU/video.html

    • @fourbyfourblazer2
      @fourbyfourblazer2 Před 3 měsíci

      It's not a computer.

    • @oldmanebikes8392
      @oldmanebikes8392 Před 3 měsíci

      @@fourbyfourblazer2 what's that suppose to mean. All heat sinks need thermal paste to work efficiently ask more experts lol because apparently you're not one.

  • @ColinBrokeFree
    @ColinBrokeFree Před 3 měsíci

    Hey, Love your videos. I've been watching since you uploaded the 2 alibaba bikes. I'm glad i waited to order a long range ebike until now. I ordered the Wallke h9 (60ah version) I would love to see some content from you on their bikes. Just throwing it out there. I'd appreciate your review on them.

    • @BRichSolution
      @BRichSolution  Před 3 měsíci

      Thanks for the feedback. The Wallke H9 is folding ebike and I am not big fan of the design as most are hard to fold and frame os over designed for the hinge which makes them heavy

  • @MooseRidez
    @MooseRidez Před 3 měsíci +1

    Side note. Forgot the thermal paste brotha. But there is a dedicated heatsink for that style motor. We use them on our crazy carts

  • @JHOFF111
    @JHOFF111 Před 3 měsíci

    Hey Rich I have a question off topic of this bike, I have the new G100 from Happyrun, excellent bike, dual battery, it's a 48 volt battery system, 28 amp controller, 1000/2000 peak motor, but it's soo heavy over 100 lbs, my question is if I swap out a controller with like a 35 or more amps will it hurt my 48v batteries? It probably won't be much faster, but maybe quicker off the line? Any suggestions would be great. Don't think I want to put a 52 volt battery system in it right now at least.

    • @BRichSolution
      @BRichSolution  Před 3 měsíci +1

      Yes the v100 is a beast and heavy. The 40amp controller will get more torque but range will be impacted

    • @JHOFF111
      @JHOFF111 Před 3 měsíci

      @BRichSolution is there a type of controller that you can suggest Rich? A name brand or amperage suggestion, I'm not too good on the electrical side of things I don't want to mess it up if I buy one

  • @smileyf8ce
    @smileyf8ce Před 13 dny

    Rich I have a question is motor tec 1000w 36v better or is the regular mx650 better in battery capacity

    • @BRichSolution
      @BRichSolution  Před 13 dny

      Battery capacity is about the same, mototec is better ride off road with better suspension over the razor

  • @Pizza-xi3fs
    @Pizza-xi3fs Před měsícem

    Good video! Do you think this thing can handle 70v?

    • @BRichSolution
      @BRichSolution  Před měsícem

      Doubt stock controller can handle 70V, maybe 52V max

    • @Pizza-xi3fs
      @Pizza-xi3fs Před měsícem

      @@BRichSolutionThanks for the help! Well I’m gonna test it anyways! Cause I ordered a new brushless motor&controller

  • @trent879
    @trent879 Před měsícem

    What would you think about going with a 48v/ 14ah or even the 20ah? Why not ya know?

    • @BRichSolution
      @BRichSolution  Před měsícem +1

      20ah will work, i did not buy 20Ah as it was not available at the time of purchase

  • @Mattoutdoors.
    @Mattoutdoors. Před 3 měsíci +1

    Which is better for offroad mototec 48v or kugoo wish?

  • @MattStone-oy6ik
    @MattStone-oy6ik Před 2 měsíci

    Did you have to purchase a new 48 volt charger or will the stock 36 volt charger still work because of the stock 36 volt controller?

    • @BRichSolution
      @BRichSolution  Před 2 měsíci +1

      New 48V charger comes with new battery

    • @MattStone-oy6ik
      @MattStone-oy6ik Před 2 měsíci

      @@BRichSolution it's a good video, and one of the only mototec modification videos of its short on CZcams how is the bike handling the upgrade so far ? I see it's only been about a month.

  • @braydenlowe2024
    @braydenlowe2024 Před 3 měsíci

    Can you please make a video of the Coleman Mini Bikes and Go Karts that are available for purchase at Walmart?

    • @BRichSolution
      @BRichSolution  Před 3 měsíci

      Not sure i live in suburbs and crotchety neighborhoods wont like the sound of gas engines especially late at night. Electric allows you to ride anytime with people knowing you’re there

  • @shaolinf3898
    @shaolinf3898 Před 3 měsíci

    Hi rich could you show me or tell me the diagram to connect my yolin dual motor battery controller. I took it apart to change the controller for the same controller as I brought a spare but it's not quite the same. I need to know where some of the connections go

    • @BRichSolution
      @BRichSolution  Před 3 měsíci +1

      I can, but not close to my bike for a few days. In the meantime see video you yolin controller for connections
      czcams.com/video/K2F6v6s4yzA/video.html

    • @shaolinf3898
      @shaolinf3898 Před 3 měsíci

      @@BRichSolution thanks rich whenever you can let me know

    • @shaolinf3898
      @shaolinf3898 Před 3 měsíci

      @@BRichSolution my controllers are different from them ones I'm getting low speed and also mph isn't going up on the display

    • @shaolinf3898
      @shaolinf3898 Před 3 měsíci

      @@BRichSolution 52v controller

    • @shaolinf3898
      @shaolinf3898 Před 3 měsíci

      Oh yes it is rich it's the double controller battery double motor wheels

  • @T-DIM
    @T-DIM Před 20 dny

    What size battery and where did you get it from ??

    • @BRichSolution
      @BRichSolution  Před 19 dny

      All products linked in the description of video
      48V / 10ah or if you want longer rides 14ah

  • @oldmanebikes8392
    @oldmanebikes8392 Před 3 měsíci

    And try to shunt mod the controller it will make a difference in torque and a little speed

  • @MooseRidez
    @MooseRidez Před 3 měsíci

    Totally should put two of those in parallel. 60 continuous amps and 20ah is a great upgrade and leaves you the ability to use and gain benefits from a programable controller like a kelly, fardriver, or vesc. Also, consider upgrading to a surron seat. Far more comfortable and a cheap upgrade to the horrible stock mototec seat

  • @Vivianauxito
    @Vivianauxito Před 3 měsíci

    Good video Sir, We'd like to invite you to do a review of our air pump, I am not sure If I have sent messages to right account.

    • @BRichSolution
      @BRichSolution  Před 3 měsíci

      Send me link to airpump and may consider it

    • @Vivianauxito
      @Vivianauxito Před 3 měsíci

      @@BRichSolution Links are not allowed here