Wood Turning Avoid Those Nasty Carbide Catches
Vložit
- čas přidán 24. 02. 2022
- I show how I avoid the nasty catches using carbide cutters.
Carbide cutters are basically scrapers. What is important is the position of the tool based on the center of the turning.
I also show some of my old pattern making turning tools and some very large turnings.
Tools used: Carbide turning tools and negative rake scraper
Finish used: Zinsser Seal Coat Acks Abrasive Acks Polish/Restoring Paste
If you found this video entertaining
Please Like and Subscribe and Share if you are inclined
The video is for entertainment purposes only
You are watching how I do things and not suggesting others should do it the way I do.
You need to know your machines and how to use them. Follow how the manufacture says to use them safely.
Look up other turnings I have done:
Dizzy Twister Turnings Segmented Turnings
Feature Rings Staves
20 minute bowl
Great gift or a craft show sales
Star bowl Block bowl
Tumbling bowls Emerging Bowls Black Locust Vase
Droop Bowl Offset Bowl Barrel of Blocks Star Bowl Bowl in a Bowl
Droop Bowl Lathe modifications Lacquer Shellac Friction Polish
Abrasive Paste Polishing Paste Wipe on Poly Black Locust Hollow Form
Multi Axis Square Bowl Siberian Elm Hollow Form
Dodecahedron Soccer Ball Sphere Olive Wood Turnings Illusions Segmented Vase
Tangent Stave Turning - Jak na to + styl
I have been pen turning for 4 years now using carbide tools only, and i still get catches especially on acrylics, so this information is going to come in really handy for me, Thank you so much, liked and subscribed. best wishes from Nova Scotia.
Thanks Malcolm. Happy it helps
Gary
Man I just learned A LOT from this video and I almost didn’t watch it.
Thank you Todd. Happy you watched and I hope you watch more of them.
Thanks again,
Gary
Brand new turner, tried my first bowl today. It went awful, catch after catch. Google brought me here, and you got me sorted out real quick! Understand what I was doing wrong, thank you for a great explanation. I was doing the opposite with regards to tool rest height. Thanks again!
Hi Mike and welcome to the world of wood turning. Understanding the geometry of what is going on is a good way to see what causes those catches. May your wood turning be catch free. But having them be rare is the best we can ask for. The wood it self can contribute to a catch no matter what.
Have fun,
Gary
My first carbide tools showed up today and I watched the lesson video. They sit with them, but yours has been a lot more informative and helpful. Thank you very much.
Thank you Lynda. Just how I learned how to use them. Have never seen a lesson on them. Which kind did you get?
Thanks for watching,
Gary
@@ThePapa1947 it was a very short video showing a bowl being turned. I did learn the differences between the round carbide and the square carbide but they did not show proper holding technique as yours did. I think, knowing the proper tool to use, and how to hold a position them are all very important lessons not just showing what they do which is basically all the video did. Like I said, yours was a lot more helpful to me at least.
Thankyou for this video.
I'll remember it by thinking of the summer temperatures when the air conditioner is on. Outside - high, inside - low
Great idea!
It’s definitely great to learn what not to do when it comes to woodturning. A catch will wake you up faster than a cup of coffee.
You are so correct Tristan. I can remember a few catches on 4-6 foot turnings. The adrenalin rush is like a someone opened a fire hydrant.
Thanks for watching,
Gary
Very well done, professor! This helps me a lot! Now, how 'bout the same info for HSS gouges and scrapers! How 'bout we all just meet at your place for a class lecture? I'll bring the Pringles! 😊😋🤣
Phil
Thank you Phil. Scrapers would work just like the carbides as far as catches go. As you know those gouges have a mind of their own.
You decide to let the wing touch wall on the inside and the gouges lets you know that is a big NO NO!
Pringles sounds good! But I would say bring your own HEAT..right now it says 34 degrees. And not sure what I will turn next but it is going to have to be a quickie!
Stay warm buddy!
Gary
Im so glad I found this video when I was in high school my shop teacher had me visit the local Pattern shop Ipswich Pattern was the name of it and l almost went to Fitchburg college to learn Pattern making but it didn't happen I chose to be a mechanic instead but never lost my love for woodworking! Seeing that you were a Pattern maker brought back many memories of that shop I became good friends with the owner Jack Sweeney he taught me so much and let me use his WONDERFUL SHOP! on weekends and evenings sadly Jack passed away from cancer I'm so grateful to have him for a friend end his knowledge I also turned a 6 foot tabletop in his shop what a great experience now at 70 I'm still turning mostly live edge bowls and vases thank you for bringing back those memories Happy turning to you Gary from Happy Wood Turnings here in Ducklake Maine!👍
Thank you very much Jon for an absolute wonderful story.
I lived behind a pattern shop as a kid and did not know what they were doing but when I found out I decided I was going to be a pattern maker.
Uncle Sam decided he wanted me for 2 years abut after that I followed my dream.
Thanks for watching,
Gary
Good job brother👍🏽. yes I love my carbide tools. LOL now I know where the experience cutting coming from my friend ☺️. And we are in 80° temperature in LA 😂
Thank you very much! Oh gee thanks it is 80 in LA..way to rub it in! .And I thought you were a pretty good guy LOL Well it has warmed up some here but that is because we are now having rain.
But that is Oregon for you. Up here we don't tan we RUST!
Take care my friend,
Gary
The king of common sense! Anyone either just starting out or a very seasoned turner will quickly
understand what catches are and, by your instructions, avoid them. Thanks.
Thank you. And for sure. Catches are common when first starting out. I think some might give up before figuring it out.
Thanks for watching,
Gayr
Been getting catches inside my bowl with the carbide (brand new turner). Makes complete sense, thank you!!
Thank you for watching and letting me know.
Best of luck.
Gary
hello friends greetings healthy and successful always. thank you for sharing knowledge and always faithfully watching your latest stuff I like your ideas amazing knife
Thanks so much and thanks for watching.
Gary
We are often told that it is the burr on a negative rake scraper that does the work... and after a few seconds the burr is gone and it's time to regrind to get a new burr. However..... Carbide does not create a burr. So how do carbide negative rake scrapers work so well? Is it just tool geometry? Last.... Do you build your own carbide tools? Favorite source for replacement cutters?
Thanks.... I worked as "Pattern Boy" right out of college (Industrial Arts-1981) and have the utmost respect for that trade. It has certainly changed in the last 30 years. I learned ton in my stint there.... From working with mammoth machines and their upkeep, to fine, precision skills to ensure accuracy. I told my students a story the other day about an emergency modification I had to do on a pattern. The foundry guys were in my shop b/c they needed the change right away. We painted our patterns with Freeman Pattern Paint--the lacquer based stuff. As soon as I painted the changed part they lit the paint on fire to burn off the solvent and dry the paint. By the time they walked back to the foundry area they were ready to ram up the modified pattern. Good times!
Thank you Dave! All HHS scrapers cut using a burr. And I think they cut better than any carbide cutter. The advantage to the carbide is they stay sharper longer. And the fact there is not burr I do not think they cut as good as the HSS scrapers. You can hone the flat ones and it does help but if you get a burr it is on the wrong side to help you.
The negative rake carbides help to not get catches for the same reason the HSS ones do, But no burr so do not cut like the HSS ones do.
I remember the stories of the old time pattern makers lighting the paint to get it to dry. But they were using Shellac and it flashed off and that was it. I heard about an apprentice in a different shop lighting up lacquer and just about burned the pattern up before they could get the fire out.
We used lots of Freeman products as well.
So when you say Pattern Boy is that an apprentice or a helper?
Yes it was good times for me as well. I remember taking a trip to one of the foundries to do a design change on how some cores fit together. The mold was so big I could climb down inside and look at the fit of the cores and then go back to the shop and adjust the core box. That was one big pattern I made and one big sand mold.
Thanks for watching and your stories. Good Times
Gary
I got the job in a pattern shop a few weeks before my college graduation-- I was not sure if I wanted to become a shop teacher, or go into industry. The actual pattern maker only worked 3 days a week, so he would show me what to do on the days in between when I was alone. The plant foreman was there all five days, as well, so I was not completely alone on those days. By August I was offered a teaching job, so I did not stay in that field.... I was only a Pattern Boy-- not even an apprentice.... But it was really great work. The patternshop was at one end of the building, a complete machine shop in the middle, and a foundry at the far end. But it was a skeleton crew-- 1981 was the beginning of the end for many old industries in Trenton, NJ. This is my 41st year as a shop teacher and I still fondly remember those months I spent in that pattern shop.
I think being a shop teacher would be a great job. I had 3 teachers that inspired me. First was in grade school. He was strict if you goofed off but I loved the class and never goofed off. The other two in high school were great as well. Both the wood shop and the metal shop teachers. Also took architectural drawing and the metal shop teacher taught that.
I'm a beginner and since I don't know what I'm doing this is very helpful. I've not had trouble with catching on the outside but terrible on the inside. Thank you 😊👍
Thank you very much. The geometry of the inside vs. the outside is totally different when it comes to tool placement.
Happy it has helped.
Gary
thank you so much for this video. I have switched to carbide as traditional catches have scared the crap out of me with catches such as the scew chisel (aka widow maker). I am so excited to turn my Lathe back on and make shavings!
Thank you Glen. For sure it is hard to get comfortable on the lathe if you have a fear of a tool.
I seldom use a skew for the type of turning I do.
Have fun using the tools you are comfortable with.
Gary
Adding to my comment 9 days ago. Your advice on above centre on outside and below centre on the inside has helped my turning immensely. I have turned a couple of bowls and some spindle items since watching your video, thanks very much.
Thank you Gary that is great to hear! I know it can be frustrating when things work and then they don't. Glad it takes some of the mystery out of those catches.
Have fun,
Gary...from Oregon
Very interesting .. I would like to hear more about your pattern-turning-days ..
Thank you Jeff. Here is a video I did at the my beginning of making videos. No talking but some cool pictures.
czcams.com/video/lil3zwgc3Ok/video.html&ab_channel=ThePapa1947
Thanks Gary what a great teacher you are. I don't have any carbide tools yet I use my bowl gouges and scrapers figured if I learn with traditional tools I can get a couple of carbide
Very good thinking Jane, thats the way to go about it!!
Thank you Jane. You are doing it the right way. Gouges are my choice but carbides can come in handy, Also your scrapers will act just like the carbides unless they are negative rake.
Thanks for watching,
Gary
I am new to turning. Thank you for showing me why I've been getting all those terrible catches.
Thank you for watching KC. There is usually a good reason for catches and tool placement is a very important part of wood turning.
Have fun turning!
Gary
One of the best piece of advice that I've seen from time ago. Thank you.
Thank you very much. I know it is how I was taught years ago and it works for me.
was hoping to learn the wide and narrow sided radius measurements on the center plug used in the twisted tangent stave bowl.
Thanks, Elliott
I have made two of those videos. Which one are you talking about and I will give you a dimension that will work.
If it is the smaller one I started with 3" on the top and 1" on the bottom. I made adjustments to it while checking how the staves closed up.
That is directly connected to the size of the staves.
Hope that helps and if not leave a comment in the video you are talking about and it might help me explain better.
Gary
Thank you. It seems so obvious now, but I sure wasn't getting it. This explains a lot of the mistakes I have made.
Thank you very much Jeff. Happy you enjoyed the video and thanks for watching.
Gary
Thanks Gary
Extremely informative video....
Thanks always enjoy your projects...the knotty pieces of wood with edge bark and lots of inclusions is my favorite projects to turn
Ian
Edmonton Canada
It's cold here also
Thanks for watching Ian and I like those types of pieces as well. Working one right now.
I am sure it is a lot colder up where you are at.
Take care,
Gary
Thank you sir that will make a big difference for my turning ✌️
Thank you very much and thanks for watching.
Gary
Perfect! It is the 3” wedges I am attempting, I will make angular adjustments as you recommend. thanks for your help.
E
Thank you E. Just know you can take a piece or two out to help the joints close up. The angle becomes a compound angle whey you tilt the pieces.
Gary
Great video Gary.
Thank you Jack and thanks for watching.
Gary
Great info....it has been certainly a catchy problem for me.
Thank you Marcel!
another awesome video Gary, Thank you.
Thank you Glen and thanks for watching.
Gary
Thank you I needed that!
Thank you Barry. Happy you found it useful.
Take care,
Gary
Ah that explains that catch on the inside... Too Big of a bite... Great Info Thanks Gary.. So now I know.. time to put it to use on that Burl I'm working on when I get home...
Thank you Timothy and have fun turning the Burl.
Take care,
Gary
Gary,
Wonderful bowl you turned. I enjoyed seeing it all done with carbide tools. The explanation of how the curve of the bowl relates to the tool position was superb.
Thank you Skip and thanks for watching.
Gary
Hello my friend,
Congrats on the project and smart way of working that hides great experiences. Thank you for this useful information. The design you translated that huge years ago was magnificent and impressive. I was also impressed by the shop you served in your apprenticeship. Details were beautiful. See you. Big greetings.
Thanks so much my friend. It was a great shop to learn in. Being a small shop I started building patterns from day one. A big shop it is a few years before they turned you loose on your own project. I worked there for 11 or 12 years then moved to the largest shop in town. Lots of equipment and much better. But I am grateful for learning in the small shop with the machines we had.
Thanks for watching,
Gary
Good info Gary. Thanks.
Thank you Stuart. It was a good time to do it because it sure has been cold. Still cold so I need to work on something a bit easier again. I do not handle the cold the same as the days I spent all day in my drift boat in freezing weather LOL.
Thanks for watching,
Gary
VERY informative, Gary!
Thank you Kathleen and thanks for watching.
Gary
That was a great lesson, thanks Gary.
Thank you Stewart and thanks for watching.
Gary, that is a great explanation. Thanks for clearing that up for us.
Very welcome and glad it was helpful.
Gary
Thanks for this,
Always happy when I’m learning
Thank you Kevin, happy you enjoyed the video.
Take care,
Gary
So that’s what I’ve been doing wrong. Everything! 😃😃😃 Great tutorial, Gary. That really clears up a lot of questions for a lot of us turners. Thanks for sharing your expertise. As always, you da man! Stay well, my friend.
…..Gord
Thank you Gord. I was ask about this a few years ago and then again last week. So that and the fact for us 23 degrees is cold I figured this would be quick and hopefully helpful.
Oh and I have not seen you do anything wrong yet my friend!
Take care,
Gary
Great information Gary. Really appreciate all the stuff I have learned since I started watching your channel.
Thank you Doug and thanks for watching.
Gary
Great video Gary, very informative. Thanks for sharing.
Thanks so much and thanks for watching.
Gary
Thank you Sir for the great info.
Thank you Clinton. I appreciate you watching and commenting.
Gary
Your videos are great! I always learn so much!
Thank you very much. And thanks for watching,
Gary
THANK u gary good sound advice on tools.
Thank you Manjit I appreciate you watching.
Gary
I got a bad catch yesterday using a round carbide cutter on the inside of a bowl which threw my hand into the natural edge. Youser that hurt and I have some major scrapes and bruising to show for it. Thankfully no broken bones. Wish I had seen your video beforehand. Thanks for your insight.
Sorry to hear about your catch. It does sound like you could have a sore hand.
I hope you are catch free from here out.
Thanks for watching,
Gary
That laurel bowl was turned from my start to your finish, completely with carbide edges! As you may recall, Gary, that's all I've ever used. Had to teach myself how to turn and carbide was my choice. Your methods and mine differ, somewhat-- one to try is the square bit for most extererior cuts except the curve to that base. I've found it cuts smoother and I have better control of the cut. Also, carbide bits can be sharpened! Using diamond card files from 600 to 1,000 grit, sharpen *only* the face by lightly pressing the bit to the card with a fingertip and move it rapidly in small circles, working up through the grits. When the screw will no longer tighten it down to the shaft, toss it away and replace. It'll be quite awhile before it gets to that point. In 5 years, I have tossed only one that wouldn't tighten; others get tossed when they meet the chuck.😳 Cheers!
Well Dave I knew there was a good reason to finish that bowl in this video. I would have used bowl gouges had I done it on its own. So this was meant to be.
I plan on making another holder that puts the point straight out. I think this would make a great cutting tool. Just like my larger scraper. It is very controllable on light and heavy cuts.
I sharpen them on a diamond card as well. But unlike a HSS scraper you are not putting a burr on it. That is why I feel the scraper cuts better but dulls faster.
Take care,
Gary
@@ThePapa1947 EasyWood now makes neg rake bits for all their full-size handles. I grabbed 'em for the round and square shafts. They do work nicely, but I haven't yet figured out how to sharpen them when they get too dull.
Good lesson Gary. Thanks for this explanation.
Frank.
Thank you Frank! Happy you enjoyed it.
Take care,
Gary
Thanks for the information on how to position the carbide tools, that's what i'm learning with carbide. Just the job thanks Gary. All the best from Lincolnshire UK
Thank you very much Gary. Hope it helps. Nothing wrong using them either. I have never had anyone I gave a bowl to ask me if I used a gouge or a carbide cutter.
Take care,
Gary
So, you were a professional pattern maker. Now I know why you gain the results you always get.
I can't even imagine turning 6 foot diameter turnings, let alone actually doing it.
This is something that every person who wants to start turning wood should see. Great video. ;-)
Thank you very much Robert. I did do one bigger but it was just a ring. But it was close to 8 foot diameter but was only about 4 inches thick as I recall.
I always thought I had the woodworkers dream job.
Thanks for watching and commenting.
Gary
I thoroughly enjoy your videos Gary and I thank you for sharing. Another night when I go to bed less stupid. You asked me to let you know how I got on with the oak plank turned into a bowl: let’s just say it wasn’t a total failure. The glue lines show too much and I think my two year old glue is past its use by date. I have only been turning for two years and your teaching has helped me so much. If had had your name, my numbers would be 1949 🌞
Thank you Ray. Well I bet when you get some new glue and give it another shot you will do much better.
Oh yeah I remember 1949 very well LOL. Actually we were in the 1948 Vanport Oregon flood and the house floated down the river. I only have stories of it and my brother(13 years older)
caring me out. We used to kid about that. We lost him last year but I like passing that story on.
Thanks for watching,
Gary
Thank you Gary great educational video take care and God bless
Thanks so much Mike and God bless you as well.
Take care,
Gary
Carbide tools have a learning curve just like conventional tools do. In the end one has more sharpening and one has more sanding.
Lots of choices for sure.
Great information Gary, thanks for sharing.
Thank you Tim!
Take care my friend,
Gary
Very interesting a d helpful Thans Gary.Terry downunder
Thanks you Terry and thanks for watching,
Gary
Very nice information about carbide tools' take care.
Thank you Sagar, take care my friend
Gary
Absolutely awesome video Mr. Gary thanks for sharing.
Thank you Donald and thanks for watching.
Gary
Nice simple bowl that looks very nice n thanx for the info buddy.
Thank you and thanks for watching.
Gary
@@ThePapa1947 n that 6'er you turned was awesome.where did you work n do that stuff.
@@exotictones1054 both those pictures were taken in the pattern shops I worked in. I worked in 2. One I served my apprenticeship in and the other I worked in till I retired almost 10 years ago. Both in Portland Oregon.
Excellent job of showing and explaining this important issue
Thanks so much!
Very informative Gary answered some questions I had about carbide very helpful 👍
Thank you Tim. Happy it helped.
Gary
Great information in here. Thank you.
Thank you Rick and thanks for watching,
Gary
Thanks for your response. I used all 30 wedges, maybe my jig was 11.85 deg because the plug is 3” tapered to 1” as instructed and the joints are outstanding. Can’t wait to spin it. You are an inspiration, bravo!
Happy it all worked out for you.
Thanks for letting me know.
Gary
Very useful - thank you
Thank you Bob and thanks for watching.
Gary
Hi Gary, I was a master carpenter ( nobody is except maybe Norm) and instructor for 50 years and most of the influencers are new and are great for teaching me what I forgot! But you always challenge me with something new. So I had to subscribe and comment. Which I I only done 5 other times.. thanks and keep up the good work!
Well thank you very much and thanks for subscribing. I worked as a journeyman wood pattern maker and I still love to learn something new. You sound the same.
Thanks again,
Gary
Great video, 👍👍👍👍👍👍
Thank you my friend!
Information that everyone who works in Woodturning needs. Cheers Gary 👍 💯
Thank you Sony!
Take care,
Gary
Great informative video
Thank you Vern!
Great explanation! Thanks for sharing this.
Thank you Marcy and thanks for watching.
Gary
Thanks the information was helpful
Thank you Joann! Happy you enjoyed the video.
Take care,
Gary
That was a great explanation. Thank you so much.
Thank you Lee, happy you enjoyed it.
Gary
Great instruction
Thank you Brad. Happy you enjoyed it.
Take care,
Gary
This video helped me so much! I made a beautiful bowl with your advice. Thanks so much for posting this, it’s a lifesaver!
Thank you very much. Happy it helped.
Thanks for letting me know and watching.
Gary
Thank you.
Thank you Khan!
Great info for the turners in your audience, Gary. Take care.
Bill
Thank you Bill, I thought about doing this a few years ago and there just has been a little more interest so I went ahead and did it. Plus it was fairly quick and it has been cold. It is 26 here this morning.
Thanks for watching,
Gary
Very well explained, Thank You.
Thank you very much!
Thank you
Thank you for watching.
Thank you for the info, this was a really great video!
Thanks so much Salvatore. Happy you enjoyed it.
Take care,
Gary
Great video Gary. I've had a few nastie's when hollowing on the inside, particularly reverse turning deeper ones. Now I think In know why. Love the photos of your early workplace and jobs.Thanks, keep warm John
Thank you John! The inside and down deep can be hard no matter what you do. And a smaller inside diameter makes it even harder.
Take care,
Gary
Brilliant!! Thank you very much👍👍👍
Thank you very much Alan and thanks for watching,
Gary
Thanks, Gary! I use carbide fairly frequently, so getting your take on the technique is golden.
Thank you Michael. It works for me. Hope it works out for you as well.
Thanks for watching,
Gary
Most excellent video on carbide cutters.
Thank you Bruce, glad it was helpful.
Take care,
Gary
Thanks for the informative video, always interesting to have technics explained.
Thank you Kent and thanks for watching.
Gary
Thanks Gary! I'm going to have to try your technique the next time I use my carbides!
Thank you Heather and best of luck.
Gary
Thank you for making this video it was a great help
Regards
Steve London UK
Thank you Steve. Happy you found it useful.
Take care,
Gary
Very impressed with the pattern making work you did. That is a craft that requires great skill.
Thank you Mark. It was a job I knew I wanted to do when I was in high school. There was a pattern shop behind where I lived. As a young boy I did not know what they were doing but wanted to do it. In high school I found out what it was and set out to get an apprenticeship.
Thanks for watching,
Gary
Thank you Gary great information my favorite are the dizzy bowls stay safe friend👍👍👍👍
Thank you Radar and I love to do dizzy bowls so I should think about doing another. They take a lot of hours for sure.
Take care my friend,
Gary
i REALLY like your videos. I learn something or am reminded of good practices from virtually every one of them
Glad you like them Arley and I appreciate you taking time to comment.
Happy New Year,
Gary
Very good demonstration for carbide tools and catches. Thanks much.
Thank you Randy. Happy you enjoyed the video.
Take care,
Gary
Very informative video...loved it! Wow, that was one huge piece you turned!
Thank you Carol. That one in the small shop I did shortly after finishing my apprenticeship.
In the shop I went to where you see me turning there was a large post lathe to the right out of site. I did turn a ring almost 8 foot in diameter but was only about 4 or 5 inches thick as I recall. Wished I had taken pictures of everything I built. But I did take a lot.
Thanks for watching,
Gary
Thank you! I watch a lot of turning videos and very few of them actually show techniques particularly around safety. Thank you.
Thank you! Understanding the geometry of the catch really helps to see why it happens. And should help to avoid it.
Thanks for watching,
Gary
Thank you it will help a lot
Thank you Dennis and thanks for watching,
Gary
Thanks so much, I had trouble with catch’s on the inside of bowls now I know why, thanks again
Thank you Gary. Happy it helped and have fun.
Gary
Good info GARY, they can be dangerous, 2 years ago I had a carbide catch and it kicked back and up so hard, it cracked 2 of my ribs, no fun.
Thank you Tom. For sure they can be dangerous and scary. If someone got a catch the whole shop would hear it and look over toward the lathe.
Take care,
Gary
Hi Gary, Great explanation on presentation of carbide tools. Lovely little bowl as well. Take care my friend. Hwyl, Huw
Thank you Huw, this was perfect for a cold weather video. It is 26 right now so not sure when I will start the next one. But my heater will keep me warm enough.
Take care,
Gary
Thanks Gary, You showed me something that I have had problems with now I know! I will be trying this in the future.
Thank you Tim. I hope it works great for you. I only go a little past center and showed it as a long way just to make it easier to see.
Thanks for watching,
Gary
Really good tutorial, thanks
Thank you Tim. Happy you enjoyed it.
Take care,
Gary
Thanks for this very usefull video, Cheers from Argentina!
Thank you and thanks for watching.
Thank You Gary...Very much appreciated, very informative. What you do automatically, perhaps without thinking. It is nice to hear your simple breakdown of the do's & don'ts of turning. .. At 9:37 you mentioned the large casting was Titanium, WOW...Impressive piece to say the least. I shared this one with a machinist friend that lives near by you.... TM
Thanks Tuffy! I wanted to put a picture of the huge pump body I made but I did not do any turning on it. But I am standing by it and it stands as tall as me.
Thanks for watching,
Gary
Thanks Gary very informative. I like using the carbides. I tend to keep them horizontal and on the centre line but will try adjusting them slightly. 👍👍
Thank you Steve. As long as you are right on the center line you should be fine. It is when you do not pay attention and wonder off the wrong way is when it becomes a problem.
Take care,
Gary
Thanks for the info much appreciated i have just started using carbide tools and they have a good amount of uses
You bet Ian. Hope it all makes sense and helps.
Take care,
Gary
That was a great tutorial Gary and I learned a lot having never had any instruction on turning! I love my carbides and by trial and error found that keeping them in the center of the work is the best way to use them! Thanks!
Cheers Al
Thank you Al and yes the center should work fine.
Thanks for watching,
Gary
Excellent and informative presentation, I believe that this will help make my carbide tools more friendly, thank you for taking the time to make this video.
Thank you Jimmy. Happy you found it useful.
Happy turning,
Gary