thank you for explaining all the little overlooked details of each clipper! Nice video, priceless game... but me personally, I would clean my clippers before making a video with them, even if it was immediately after being done with a client. But nice video once again.
Ehhhh, if spraying it doesn’t quiet it down. It’s probably where the motor rotated the blade. There should be a plastic piece there between the motor and the blade that rotates it. It gets worn or and more slack creates more noise. If you can get that small part it may quiet it down
I actually prefer the Masters. And the magnetic guard system. But so many ppl trash them. Lol I don't understand why. I've been cutting with the red Wahl's, I forget the name of them. I do not like them. The cuts I do with the masters are way better. But I am excited to try out some new clippers and see what else I can add.
It's probably a case of which fading system you prefer: A full range clipper, as opposed to a half range clipper. The red clipper you referred to is a Magic Clip but it's the lesser version of the Cordless Seniors.
@@BobaDavis yeah so I had more time to use them, and I started to like the Magic Clips. However, I like them mostly for how light they are and when I need to smooth out a blend on straight hair. I'm thinking about getting an Oster cordless clipper or the seniors or the rebels, next. I want something with power, that's also light and bc I'm a woman with small hands, something I can control more easily. I still like my masters but after using them everyday all day, my wrist started bothering me. So I went back and forth with the 76ers, magic clips, and seniors. And used my masters for black hair or balding fades with the fade master.
Finally an answer to my questions. I’m an andis guy. I was worried if I can replace my whole line up with wireless. I’m looking at 4wireless master and 4 wireless t outlines. And 2 76 or supras
I got a corded andis fade master and it seems to get pretty hot within 30 minutes or less of using. Any of these have something similar to what I am experiencing
Привет братан! Посоветуй pleace хорошую беспроводную универсальную машинку для стрижки..мне нужен качественный клипер для снятия массы волос и для фейда..
For me, I feel I get closer to the scalp and underneath the hair better, which results in going over the same spot less. So quicker cuts and better fades for me
@@barberslounge I think I’m going to fight my ocd and try one and also a gtx blade. Been with the original equipment from day one. 4 masters and 4 t outliners
Corded clipper question. So is the fade master essentially the same as the master with the different blade? If you're replacing with the master blade with the fade blade would that made you prefer the fade master to the master? Thanks!
@@barberslounge I've been cutting my own hair for like 2 decades ( medium fade, close not bald) and I've been ok with using the colored wahls lmao. I was thinking of upgrading but a lot of stuff on the fade master is that "It's not recommended for beginners because of the straight blade" you're the the first I've seen that said you don't like the masters blade. The regular masters blade seemed super thick to me too which is why I was researching more. I don't think I'd be considered a beginner, maybe a novice ... but that's what's making me hesitant about getting the fade master: the idea that you need a higher skill level to use it.
@@AmaterasuMasamune keep in mind they’re a little heavier. I cut my own hair too, and had been using the BaByliss boost. Maybe get an upgraded Wahl and premium clips for it, when cutting yourself, using something you’re used to and comfort on the grip are important
I did that on a Wahl years ago and it never sat right after that. It would just get loose after one cut. Since then, I’ve been very reluctant to mess with lever arm screws
@@barberslounge ok cuz I just got my new clippers and switched the lever with the gold lever and I hope I didn’t mess it up but I think it’s suppose to get switched out
@@realmenez that should be fine, forgot they give you extra levers. They wouldn’t give you them if it would be a problem. Gonna try to tighten mine down a little now, or change it with the other one.
Our supplier brought it by, but I passed on buying it once I felt the lever, I knew it would take a while to break and my thumb would be sore as hell for days from flicking that thing. Stagger tooth blade should be fine, I feel like they did that just mimic the “crunch” from the corded Andis Master
@@barberslounge imma a new barber so the lever didn’t bother me sense I place my thumb on the side of the nub but I’ve cut with the babyliss clippers and my clippers just feel smoother
@@kampfer1299 if you’re comfortable with it, then keep using it. As you start to speed up thru cuts & clients it might be a problem on on your thumb, but hopefully it will be broken in by then. Just don’t be afraid to test out different clippers over time even if they don’t feel comfortable at first. It’s a regret of mine, behind reluctant to try new products
@@barberslounge yeah I understand that I got the legends because they seemed like Andis masters with the extended lever and all without the price tag adding the staggertooth blade just made it feel smoother
thank you for explaining all the little overlooked details of each clipper! Nice video, priceless game... but me personally, I would clean my clippers before making a video with them, even if it was immediately after being done with a client. But nice video once again.
Im using this senior for 1,5 year and no problem with clipper, cutting very well, but is noisy but is no problem for me. Love senior
Ehhhh, if spraying it doesn’t quiet it down. It’s probably where the motor rotated the blade. There should be a plastic piece there between the motor and the blade that rotates it. It gets worn or and more slack creates more noise. If you can get that small part it may quiet it down
If it’s noisy think about replacing the cam follower, look up tutorials it’s a very easy process and you should be good
Been using BaByliss clippers for more than 2 years now. If your lever behaves like that - just tighten the screw on it, should be as good as new
I actually prefer the Masters. And the magnetic guard system. But so many ppl trash them. Lol I don't understand why. I've been cutting with the red Wahl's, I forget the name of them. I do not like them. The cuts I do with the masters are way better. But I am excited to try out some new clippers and see what else I can add.
I agree!
It's probably a case of which fading system you prefer: A full range clipper, as opposed to a half range clipper. The red clipper you referred to is a Magic Clip but it's the lesser version of the Cordless Seniors.
@@BobaDavis yeah so I had more time to use them, and I started to like the Magic Clips. However, I like them mostly for how light they are and when I need to smooth out a blend on straight hair. I'm thinking about getting an Oster cordless clipper or the seniors or the rebels, next.
I want something with power, that's also light and bc I'm a woman with small hands, something I can control more easily.
I still like my masters but after using them everyday all day, my wrist started bothering me. So I went back and forth with the 76ers, magic clips, and seniors. And used my masters for black hair or balding fades with the fade master.
@@nyquitacharles9146 Yeah, a lot of the newer clippers are lighter. A good tip is to not use you wrist to flick but your elbow joint, instead.
@@BobaDavis ohhhh that's a very helpful tip! Thank you.
Most honest video I've seen on here
The master original blade is the Taper blade. I use masters for tapering. The other for fading of course
Got it, good looks
Finally an answer to my questions. I’m an andis guy. I was worried if I can replace my whole line up with wireless. I’m looking at 4wireless master and 4 wireless t outlines. And 2 76 or supras
Supras ZRs hands down, no maintenance either
I like the legends I put the master blade on it and the tomb 45 battery it's really nice.. nice comparison bro 👌
Andis the best blade fade
Ion know I like the senior at least the one I got recently but I only cut my hair so yea
I got the corded masters in barber school they cut so buttery I’m thinking about the cordless
Run time doesn’t matter until it’s the only thing that matters… especially when they don’t come with bases
In order (of these clippers)
1. Andis
2. Babyliss
3. Wahl
imo of course
Thank you for video! Which clipper more reliable and durable - Senior cordless, Legend cordless or Master cordless.?
I got a corded andis fade master and it seems to get pretty hot within 30 minutes or less of using. Any of these have something similar to what I am experiencing
That’s one of the cons of a magnetic motor, they cut great but get hot quicker than the cordless rotary motor, if heat is an issue. Go cordless
Wow straight clippin no trippin. 3 for the price of 1 video.
What's the run time from one time?
My corded master is quieter than that one 😂😂 might need a tuneup
How has the babyliss been so far overtime?
I’m debating on getting it
Don’t get it, buy Stylecraft, my boosts have failed
Can you do the stylecraft clippers and trimmers?
There great bro trimmers hit out the box btw
Super helpful video bro 😎 👊🏽🤙🏽🙏🏽
Hey do I need the fade blade for just doing a buzz cut to 1/4 inch or would the standard blade be ok?
No standard blade is fine, fade blade is just a preference
My andis master has been pulling hair even with a new blade. Has anyone had this problem? Thanks for anyone's input
Hmmm, have you tried realigning it?
Привет братан! Посоветуй pleace хорошую беспроводную универсальную машинку для стрижки..мне нужен качественный клипер для снятия массы волос и для фейда..
BaByliss Boost FX Clipper
What’s that black rubber looking thing on the master?
A grip made by Tru Barber, when I’m free handing it, it’s clutch
What’s the part # for the Andis Master replacement blade? Thanks
The standard blade it comes with or the fade master blade ?
74045 is the fade blade, it adjusts from 00000-000. 74040 is what it comes with the Andis Master Cordless, it adjusts from 000-1.
I’ve never in my life used a fade blade. What’s the big deal with them.
For me, I feel I get closer to the scalp and underneath the hair better, which results in going over the same spot less. So quicker cuts and better fades for me
@@barberslounge I think I’m going to fight my ocd and try one and also a gtx blade. Been with the original equipment from day one. 4 masters and 4 t outliners
It called a taper blade
Thanks chief
Corded clipper question. So is the fade master essentially the same as the master with the different blade? If you're replacing with the master blade with the fade blade would that made you prefer the fade master to the master? Thanks!
Yes they just don’t make a cordless Fade Master to my knowledge. If I had the corded version it would be the Fade Master.
@@barberslounge I've been cutting my own hair for like 2 decades ( medium fade, close not bald) and I've been ok with using the colored wahls lmao. I was thinking of upgrading but a lot of stuff on the fade master is that "It's not recommended for beginners because of the straight blade" you're the the first I've seen that said you don't like the masters blade. The regular masters blade seemed super thick to me too which is why I was researching more. I don't think I'd be considered a beginner, maybe a novice ... but that's what's making me hesitant about getting the fade master: the idea that you need a higher skill level to use it.
@@AmaterasuMasamune keep in mind they’re a little heavier. I cut my own hair too, and had been using the BaByliss boost. Maybe get an upgraded Wahl and premium clips for it, when cutting yourself, using something you’re used to and comfort on the grip are important
@@barberslounge do you use premium clips for your babyliss boost? (If so which ones?)
Since you place to fade blade on your Andis masters, does the purple guards fit on that Fade blade?
Yes, fits perfectly
@@barberslounge thank you for a quick response
What is better for beginners Wahl or babyliss
Either or honestly, I would try the Andis for beginners. But if I have to make a choice I’d say BaByliss, a lot of people are using them nowadays
wahl is the best. thank me later
Have you tried to tighten the screw in the lever on the babyliss clippers?
I did that on a Wahl years ago and it never sat right after that. It would just get loose after one cut. Since then, I’ve been very reluctant to mess with lever arm screws
@@barberslounge ok cuz I just got my new clippers and switched the lever with the gold lever and I hope I didn’t mess it up but I think it’s suppose to get switched out
@@realmenez that should be fine, forgot they give you extra levers. They wouldn’t give you them if it would be a problem. Gonna try to tighten mine down a little now, or change it with the other one.
If you get some Loctite, your levers will hold great.
This review by it self could bring inflation to a halt. Too much value in one video.
THIS IS HOW U FEED THE STREETZ
I just give ‘em what they need
@@barberslounge the block so hot the streets melting
Good video I wanna know ur opinion on the wahl cordless legend I got mind for around 110$ and put magic clip stagger tooth blade on it..
Our supplier brought it by, but I passed on buying it once I felt the lever, I knew it would take a while to break and my thumb would be sore as hell for days from flicking that thing. Stagger tooth blade should be fine, I feel like they did that just mimic the “crunch” from the corded Andis Master
@@barberslounge imma a new barber so the lever didn’t bother me sense I place my thumb on the side of the nub but I’ve cut with the babyliss clippers and my clippers just feel smoother
@@kampfer1299 if you’re comfortable with it, then keep using it. As you start to speed up thru cuts & clients it might be a problem on on your thumb, but hopefully it will be broken in by then. Just don’t be afraid to test out different clippers over time even if they don’t feel comfortable at first. It’s a regret of mine, behind reluctant to try new products
@@barberslounge yeah I understand that I got the legends because they seemed like Andis masters with the extended lever and all without the price tag adding the staggertooth blade just made it feel smoother
do the purple master guards fit on the babyliss clippers?
Nah, they magnetize to it, but that’s about it, they don’t snap on, too big
Nope
my seniors r so loud idk why
Might be the the plastic piece that the pin from the motor fits into is worn out. Change that and it might not rattle as loud
@@barberslounge where is that located
@@simon-cv3zp should be on the bottom of the cutting blade
@@barberslounge do u have any socials i can message u on
This guy doesn’t seem to take care of his clippers…. Solid info though
There you go! A little truth serum. Cheers 🥂!
😂 🍻
Pour that liquor out before I do it
For the customer you want to drown out! 😂🦾