Elegoo Mars 3 - 4K 3D Printer - Unbox & Setup
Vložit
- čas přidán 26. 08. 2024
- Amazon Links
Mars 3: geni.us/9co5
X Bundle: geni.us/FJN8jp
Saturn: geni.us/AAeyGup
Recommended: geni.us/JustVlads
ELEGOO Mars 3 MSLA 3D Printer Machine UV Photocuring LCD Resin 3D Printers with 6.6 inch 4K Mono LCD and Upgraded COB UV Light Source Printing Size 143.36mm x 89.6mm x 175mm
Better Printing Accuracy & Faster Printing Speed
Mars 3 3D Printer comes with a 6.6-inch 4K Monochrome LCD screen with a resolution of 4098*2560px. The printing speed is 1.5-3s per layer.It has a large build volume of 89.6mm*143.36mm*175mm. Compared with Mars 2, the printing accuracy has increased by 30%, and the printing volume has increased by 37%.
Upgraded COB UV Light Source
Mars 3 is equipped with a new free-form surface COB light source, and the light uniformity exceeds 90%. It is the first time to adopt a copper tube heat dissipation structure, and the heat dissipation efficiency is increased by 50%. The light decay is less than 5% after 6000 hours of continuous printing, which greatly extends the service life.
Excellent Build Quality
Z-axis solid liner guide structure has better stability with an accuracy of 0.001mm .The sandblasted build plate provides much stronger adherence and makes the model not easy to fall off during printing.
Upgraded FEP Film 2.0
The FEP film is upgraded to version 2.0. Compared with 1.0, 2.0 has lower release tension and protects small supports from being broken, which improves the integrity of model details and the success rate of printing.
After Sales
Mars 3 3D Printer comes with CHITUBOX Pro Slicing Software for FREE one year. 1 year warranty on the whole printer.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
New Channel: www.youtube.com/@Just_Print
Mars 3: geni.us/9co5
X Bundle: geni.us/FJN8jp
Recommended: geni.us/JustVlads
I'm thinking about buying a Mars 3 this summer. Do you have some recommendations for protection gear, especially a mask to use for resin printing at home?
@@GeorgMierau best (in my opinion) would be an FFP3 Mask used for graffiti spraying and such
You skipped a crucial step in leveling. Once you get the level you have to push “Level = 0” to reset the machine to the new level.
Maybe that's why he couldn't avoid the elephant's foot, right?
He’s literally the reason i just messed up my first test print fml
But where’s the button for level=0 ?
@@istegal8752 i think in Tools menu, or prepare
I've never seen an unbox video to Elegoo Mars 3 that is so clear to even the beginner......great job!
@18:50 Good job you just destroyed the build plate!!
Why ?
@@nickoleross6199 I hope you saw the video at minute @18:50 and after. The build plate got deep scratches by the way he removed the finished workpiece using that sharp tool.
@gwandrer I did lol I just put it in the freezer and it popped right off no tool needed
@@gwandrerhow do you remove it of the plate?
This is the most complete, perfect setup video for a Mars printer. Thank you for taking the time to make this.
By any means the best introduction for newbies out there. Thank you!
I wish that I had found your video first! Without a doubt this is the first and only video that I have found that is complete from start to finish on the Elegoo Mars 3 - 4K 3D printer. Thank you!!!
THANK YOU so much, I was having trouble figuring out how to use chitubox with my Elegoo mars 3. Your video was the best one i watched! Very clear and precise
What a great getting started guide - and review - I just ordered mine and this will help me get set started
Ditto
Yeah, the instructions are bad. This video is good.
It's relieving and somehow adds another frustration to the layers of layers of frustration today but....when you said to start printing with the plate up that finally solved the mystery and the last blocker of setting up my Mars4Ultra today. Thanks for mentioning that
Just got my Mars 3 yesterday and trying to follow the instructions was slightly confusing since I'm new to 3D printing. This video was so incredibly helpful!! Still waiting on my wash and cure station to arrive but hoping I can start printing soon!
Pro tip dont be cheap when you use the resin it cost me one FEP film .
@@mr.president1200 I ordered Elegoo brand resin
just set mine up, and was slightly confused by the wording of the setup (hence being here) you're 4 months in, I decided on the water based resin, which resin are you using, and how is working for you?
@@zollodiecast I use the water washable resin. For the most part, printing has been fairly easy however you do want to make sure your resin is warm before printing. I keep my house at 68°and when it's too cold, the prints won't stick to the build plate. Also set your bottom exposure to a higher number. My bottom exposure is set to 90 secs...just a few tips I picked up over the last 4 months.
@@monaclemonst3r thanks, appreciate the pointers
Thank you for this, Vlad! I ordered a Mars 3 yesterday, and am expecting to take delivery tomorrow. This was an informative video :)
How did you get on with the printer? Did it perform as well as you hoped?
@@MrCai01 yeah! I love it so far
Such a good introduction, I just got my printer and this was a really nice quick guide to the whole printing process!
Yeah, the instructions are poorly written (and clearly by someone who doesn't speak English as a first language) so this video was super helpful.
Thank you , I am brand new to printing, & this video walked me through all the steps for my first Mini. THANK YOU!
This is the best out of box demo I've seen yet! Was so worried about pre setup, mess and etc. Even custom model imports. Starting to lean toward Resin 3D Printing with Bundle options
Just used this video to print my very first 3D model - took it step by step as you described. Incredibly helpful and probably wouldn't have been able to do it without your support. Marvellous stuff!!!
I just received my Mars 3, it's in the box on the floor next to me. Thank you so much for your video! I am not worried I will make any mistakes with setup because of it.
Got it running but waited a day to get a magnetic build plate. Glad I did it made removing the part super easy. Also the instructions mention moving the Z axis .01mm when leveling so that the paper you have underneath can be pulled out with a small amount of resistance. Helps with eliminating that elephant foot effect. My first prints were amazing using water washable resin from Nova3D. I also build a curing station out of an aluminum foil lined box with a solar turntable and UV lamp for $35 CDN. I had the washing/curing station in the cart but it was over my budget for now.
They put rubberized feet on it now it doesn't slid around at all. It still idles with the fan on though.
I got my Elegoo Mars 3 Pro 3 days ago (290$ nice color display, better cooling/ longer lifetime, normal exposure 1.8 second but no Chitubox Pro license) and the high detailed printed results are amazing.
Such a great walkthough. This is my first resin printer and I didn't want to screw up the setup. Thank you!
By far the best user friendly video I’ve seen. This really made me realise how simple it can be to 3D print. Thanks
I'm going to skip out on the wash station because I plan on just using the water washable resin. Certainly cheaper to shake a bucket around myself. I was hoping to get away with a UV flashlight but I might have to break down and buy the curing chamber. Going to make my first print in a few days so hopefully all goes well!
bro u just made my day, i couldnt figure it out and you did a perfect job helping me thx so much
Most underrated channel, thanks for the video Vlad !
Great video as always. Thing that puts me off of resin printing is well demonstrated, the amount of space you need for at least three printer and the curing station.
The most beneficial tutorial video I have seen. You were in depth without being so technical that I couldn't understand. Thank you!!!! and you went ALL the way to the end!!! Thank you!
He also forgot to mention the most important and valid points in this video and also false information😅
I'm new to Resin printing, and bought the Mars 3 bundle based on user reviews. Your video is a great setup and start tutorial.. thank you!!
You are a lifesaver. Thanks so much.
thanks. Awesome Vid. Ordered this yesterday. so Excited
The level paper from saturn is the best 👌
I just got my first printer, this video was incredibly helpful. Thank you so much for the amazing video!
Also from factory my printer has the resin wick up the inside of the seal and slowly leaks onto the plate where you screw it down and nearly glued my screws in!! Be careful yo
This video is perfect and exactly what I was looking for, Thank you.
excellent video for us beginners using resin. thank you
Thank you so much for the video
I appreciated a lot big hug
I did my first print with just the info they send lol made lots of errors but not that far from the correct way.. thank you again
great video, especially the water based filament as I am asthmatic and the std resin is a no. TY
Thank you for enlightened me...i seriously don't know that resin can be reused back.i got the wrong idea that resin are one off use.
Very helpful since I want to do this.
I have received my mars 3 couple days ago and it does work very nice. The prints are very detailed with default setting.
Only one thing I'd complain is the fan noise is a bit loud.
For the love of me i cannot get it to work at all
@@carljohnson6967 Did you fix it? What was the problem
@@maddawg9636 it wouldn’t print to design. The models would elongate, stretch, warp. I tried everything. I know a bit about printing and couldn’t troubleshoot it. I ended up putting it down to a faulty printer and sent it back after 3/4 weeks of trying. Honestly put me off resin completely.
@@carljohnson6967 Yeah based on what you said, I'd say faulty printer for sure
@@maddawg9636 frustrating as I was so excited by resin
Maybe one sheet of paper are OK but you forgot to set the new Z zero position ? (or is it only on the Mars 3 Pro) on the Pro you leave the page with the manual moving buttons and prress the button "new Z zero" or "new Z home" (can't remember ATM)
This is a rly great video of the full process, thanks and good job!
Great video. Thank you!
This video was so helpful
What do you do with the water in that washer machine?
so frustrated i didn't get an extra FEP film and my printer came with a hole in the film. great set up guide tho can't wait to actually use it whenever my replacement film arrives.
The delaminating means it needs a support in that area. Not due to washing.
Thank you for this well made video
Amazing video
Great informative and educational video.
Once you confirm leveling the bed raise the bed then let it auto home then test your GAP then try printing!!!! You do not want to put your plate through your screen or fep!!! It's like a weak screen protector!!
wonderful vid. thank you :)
Norm from Tested had the EXACT same problem on the test print
Great for jewellery!
Do I have to wait to grab the models after they are done printing?.. because mine are very wet and drippy. Already ruined both pairs of gloves that came with the kit.
My first attempt at some point the thing tilted and the rooks look bad. I’m hoping it was my fault for not tightening the bolts enough. Second try and happening now.
Love this video👍👍👍
Did you shake the heck out of that resin before pouring it into your vat?
Hello,
Good video thank you very much.
My question is:
Is it possible to be working in the same room while printing the piece?
Thank you
Does the manual not tell you what thickness paper to use to set it up?
The manual does give instructions that are a little different from this demonstration. The English manual words things a little strangely, so watching this video definitely helps clear up a few questions.
Excuse me,but where is your filter at?
It’s a brilliant printer!
tiene nivelacion de cama automatica?
So for a bit more for a capable inkjet you can get a resin printer. I dont really feel that its overpriced. I feel that there is a lot of technology inside for an expected price. Question? How heat resistant are the models? I was wondering how well they hold up in a warm environment? A small widget for a car or other place where the temps might rise a bit. Droopy Snoopy if I resin printed is a different character.
congratulations nice video, I wanted to know a site where you can download free models. I would buy it to print accessories and miniatures for naval modeling of sailing ships, thanks
How do I download the file to my pdf ?
Which do you think is gonna be the best printer in 2021? This printer elegoo mars 3 4k, or the new sonic mini phrozen 8k recently released?
Do you have the files that you printed? I just got my mars 3 today
just bought my mars elegy 3 and on the exposure test it lights up but it doesn't show the logo like yours following the unboxing steps as in the video wanted to know if this means my printer is broke please let me know if you can help
How often should you swap your wash statio. Water or Alcohol?
I accidentally ordered printer filament, and I didn’t know I was supposed to use the water washable resin 😭
Did those other models come with your printer or did you buy them somewhere? What are the best sights for buying designs?
Is the z axis wobble gone?
Same question
Can you reuse the water or alcohol in the wash tank for successive prints?
Where did you get the stl files for the other figures, you made???
So after removing the bed for the wash and cure station after each print, do you need to re-level every time ? Or once those two screws are set and locked down your good to go ?
Once they are set you're all good. The spring doesnt move, and honestly, just scraping off the print and washing them straight in there works just as well.
@@mads9aar The hex nuts that hold the build plate in position are not that reliable. Even with extreme caution the orientation of the plate is easily thrown off when removing the print from the build plate. Elegoo is an order of magnitude better than Anycubic, but this build plate mount has a serious design flaw.
So if you want continued successful prints, relevel.
Is there going to be any problem if the plate gets scuffed??! I need to know it
Cool
How different is this from the Mars 3 Pro?
Great video! thank you very much...do you know if the z-wobble issue was fixed since they released it?
What is the difference than 4k and 8k ? i mean , the resolution of the printing or the size of the printing ?
when i press home and do the paper thing, the paper can be pulled out from under the build plate very easily, shouldnt it be stuck under there? id brign the build plate down in /10mm increments untilo the paper is stuck but im scared ill crack the lcd screen. what do i do since i feel that the paper being able to be pulled out easily the build plate wont be level
Paper shouldn't be either completely stuck or completely loose. There should be some resistance when you pull. Same technique works with some self-leveling FDM printers.
How many kHz does it run at (cleaning)
When I sliced and saved the file to the desktop and dragged to the USB for printing, when I tried on the printer, it said "unknown format." Any thoughts? Also, this was an excellent video - very informative for a beginner such as myself.
Actually..I don't know what the hell I did, but I fixed it. Thank You so much for the knowledge!
Shouldn't you get your models off before? Dunking the builder plate is not good is it?!
Does this work in the cold?
Can you paint these?
I have a printing problem with this printer i got some cracks on my printed objects and also i have a peeling off from the print bed
Could you please describe what could be the cause of these problems I can send pictures
Room too cold?
Mine won't print
We didint get extra fep film with this product
cant find a local store for this 😭
damnit dude don't make me spend more money.. this look so awesome.. lol
any Z-wobble issue?
Nice one🔥💕👌👍
😊
Hey Vlad nice work do you know if we can we use lychee? thank you
you can
Looks like you scratched the build plate
Followed this tutorial down to the letter, and my models keep coming out with this white residue on them in random places, even the demo model. I'm using the exact same resin and everything. Is there something I'm doing wrong?
I don’t have a resin printer but what I’ve seen is the white residue is caused by I believe the model not drying all the way before it’s cured? Not 100% in this answer but I feel like I’ve heard that
Do your resin instructions say shake well before use?
PSA: NEVER use the metal scraper on the plate! You will damage your plate that way. Use the plastic one. It takes a bit more time to get your prints off, but your plate will last a hell of a lot longer!
Hopefully flexible build plates will be part of every SLA printer in the future since it completely eliminates this issue.
You mean on the FEP film. The build plate is supposed to have a little roughness so the first layer sticks. Just don't gouge it.
hell yeah let's destroy games workshop
Are there assholes still forcing this to be used with the Chitubox slicer or did they finally come to their senses and open up for people that bought this the choice of using other slicers? TBH this is the only thing preventing me to buy this printer.
They are allowing it to be used with other slicers now
Too bad the resin is still VERY toxic and bad for you.... otherwise, I'd be full in on resin printers!