Video není dostupné.
Omlouváme se.
Toyota Corolla - Exterior Door Handle Replacement - 1998-2002
Vložit
- čas přidán 21. 04. 2021
- Replacing my broken exterior door handle on my Corolla. Same procedure on 1998-2002 Toyota Corollas. It wasn't exactly easy but I wasn't about to pay the crazy prices to have it done. Got the replacement part on amazon for $8 and did it in about 30 minutes.
One thing i should say, the clips are very brittle inside and if they break when you are pulling the covers off, it is nice to have some extras available. I put a link below to some of the common clips.
This video and the description here are for informational purposes only. They are reference to my efforts and knowledge of the subject. It is not a complete guide or the authority on the procedure! If you are unsure about your ability to do the work, please find a professional to teach you or to do it for you. Remember as with all Do It Yourself (DIY) YOU alone bear all the risk when working on your own car. You can injure yourself or others while performing work itself and even as a result of your work!
Now you can support my videos just by making any purchase from amazon.com after following one of the links in this video description!
Tools:
- Flat Head Screw Driver or Pry tool
- Phillips Head Screw Driver
- 10mm Socket
- Socket Wrench
- Socket Extension
- Gloves
- Eye Protection - amzn.to/3tze8TA
- Paper Towels
Parts:
1 - Driver Side - TO-3199A-FL - Outside Exterior Outer Door Handle
amzn.to/3tDFCaB
and/or
1 - Passenger Side TO-3199A-FR - Outside Exterior Outer Door Handle
amzn.to/3tKteWr
All your comments likes and subscribes are greatly appreciated! Got to our goal of 6000 subscribers! Our next goal is to reach 9000 by the end of 2021 :)
Thanks so much to all of you for watching and subscribing!
luke
Click here to Subscribe to Minute DIY Videos: www.youtube.co...
Support Minute DIY Videos on Patreon :)
/ minutediyvideos
Follow Minute DIY Videos on Instagram:
/ minutediyvideos As an Amazon Associate I earn from qualifying purchases.
Much appreciated. Some SOB broke into my car, and now I'm dealing with the door handle plus the ignition switch. Thanks again.
Thanks for the video, I did this exact job today. The only part I had trouble with was lining up the lock mechanism on reassembly. I reviewed the video again at the right place and paused as appropriate, managed to work out the lock needed to be in position first, before positioning handle assembly into place. Had a win, much thanks.
That’s good to hear thanks so much!
Just a few tips: 1: Squirt some WD-40 on the plastic rod holders on both the old door handle before attempting to remove. 2: Undo the plastic rod holder clip BEFORE removing the 2 10mm bolts. 3: Spray WD-40 on the new plastic rod holder before installing the new door handle into the door.
Did this exact job today, thanks for the tips.
You make it look so easy. My window crank handle will not come off. Im afraid of breaking it.
Áa😊
Thank you for the awesome video! You've given me the information I need to make this a successful😊
Samesies thank you sir!
Thanks! I was able to do this. The hardest part was getting to the window handle clip.
I am about to rip mine off😒 Everything else was soo easy
I've seen it where you use a piece of cloth to catch the two sides of the clip and then pull on the cloth to move the clip.
Can you provide link to the rod clips? I broke the yellow ones while following the instructions from A1Auto.
Ty sir
Thank you!
Excellent Aprendì a hacerlo sòlo con la ayuda de este video
1:58 I can't remove the metal arm. It is so stuck in there that it got bent when I was trying to remove it. Any tips? 😅
I am guessing this could be used to replace the lock cylinder as well. At 2:17 you can see the lock yet unsure how its screwed or bolted on. This is not for me, Some one else on the LPL video 1351 was asking about it. I think he might see this comment. Just in case he does. Did you have a chance to see how the lock comes on and off? Nice video by the way. These types of videos have saved me more than a few times.
had a 1.5 inch spring fall out but don’t see where it goes.. 1999 corolla manuel windows
Como se cambia l manecilla de la puerta de atrás de un Toyota corola 2002
My interior handle doesn’t even pop off
I just replaced my interior handles they are a complete pain in the butt to pop off you have to use a lot of force