muchas gracias hermano, realmente no encontre ningun video en español o ingles sobre este intake y el tuyo me ha servido de mucho, recientemente adquiri el mio y con tu video me guiare mucho, gracias hermano buen video
I love K&N filters. Especially the oiled washable one. But they lied on this one. Thats not a cold air intake. The box doesn't look like it will seal to the hood and definitely has a big gap at the fender. Ergo , it's drawing less cold air than the stock set up and way more hot air from engine bay than stock . The goal is to NOT draw in any hot air from the engine bay. What do you all think the point of an intercooler is on a turbo ? The intercooler is just a radiator to cool the air coming in. Theres more to that but not here. Cold air is your friend , hot air is not ! You would do better to put the stock setup back on and switch to one of K&N's washable filters. They definitely flow more air than most paper filters. And they last. I put one on my 01 Expedition 15 years ago. Still on there. The filter it replaced was a basic paper filter that was clean. It got so much more air, the computer picked up a lean burn condition and triggered the check engine light. Reset it and it's been fine since. Somebody else mentioned the pipe steps down where it goes through the fender, there is a purpose for that. I haven't checked mine but I did run into that on my Expedition. Increased that tube and it did help throttle response right off the bottom but that was all. BTW, that little flap in the air horn that comes off the stock air cleaner. Is just there to pull warmed air across the exhaust manifold when the engine is cold. Suppose to help engine warm up. Never noticed it helping really so I pin mine so they stay open to fresh. They are know to go bad , get stuck sucking in super heated air of the exhaust. I pin mine to stay closed so fresh air only, and toss that little pipe thats hooked to it. And to all you guys running flipped lids on your air cleaners. It does not help ! You're getting nothing but hot air . Ever notice how your cars run better at cooler temps ? Us old guys (yes I'm an old mechanic) learned a long time ago, the hard way, flipped air cleaners and loud exhaust don't necessarily mean more power. They sound cooler so you push harder to hear the noise ! Getting better air flow is a great goal. But most likely your just getting better throttle response off the bottom. Maybe a tad in fuel milage. To get more power, ya gotta supply more fuel to go with that air. And not gonna happen with these old stock TBI's. Ever notice how the fuel from the injectors is spraying against the sides of the intake throats? That fuel is pooling up on the sides and dripping into the intake. Thats not efficient. The purpose of injection is proper/better atomization of the fuel than a carb can do. All the spacers everyone is using are not gonna solve that. Can you say "Holly Sniper" ? Not my bank account LOL. It's fun to tinker, been doing it a long time. But don't kid yourselves and don't waste your hard earned $$. Ok , rant over. Keep on tinkering fellas .
I like k n filters, don't like how the filter box isn't sealed off to the under hood hot air ... I've seen other aftermarket filter boxes that only get ambient air from the inner fender , that's probably the one to have, or just put a k n in the stock air box
Did you notice any difference compared to the stock? I put on a Airaid cold air intake and throttle body spacer on mine and it improved performance and mpg. I’m thinking of installing the tbi injector spacer next.
Looks good, but performance wise you wasted your money the factory intake is already a cold air intake and can handle all the power your ever gonna make out of that 350tbi.
The factory is a cold air intake but it’s not allowing enough air flow to actually make the most power. You can check out a different vid on CZcams where they dyno tuned and it showed the difference it made, check it out. But The main difference I noticed so far is gas mileage I’m saving about a 2 gallon difference because I drive the same distance everyday at the same time with the truck and the fuel isn’t as low as it normally is around the 3 trip.
Negligible difference in power, but throttle response is WAY better. Not to mention I noticed my gas mileage was a bit better afterwards. Plus, induction noise sounds great on these 350s when you have an intake
Ya the K&N is a waste of money im taking mine off after 16 years. Its kind of... not durable. The base gasket always fails cracks and leaks from the heat, The bolts and clamps loosen up. The whole system vibrates bad at wide open throttle. I modded the stock intake. Its going to get about the same gain as the KN opening it up and removing baffles.. No more stupid bracket to remove and extra nonsense to remove when I need to work on the engine with the K&N.. Not to mention the KN filters filter.. not too good. Not good for a truck often operated in dusty conditions like mine is
@BuckeyeHitters it's something I've noticed. I liked my K&N when I put it on in late winter. Sounds good and better throttle response. However come Spring and the weather's warming up in CA, I noticed how much slower the truck is with the K&N. Switched back to the stock intake and it's actually FASTER, just a lot quieter. Either way, think I've learned my lesson with exposed-filter intakes. No go for me.
I know I’m late but were did you buy the kit from because I have a 94 Chevy 4.3 v6 and I also want to do that to mine but I can’t seem to find the parts for it please help
Awesome job
Man love all the videos keep going !!!🎉
I appreciate that brotha fr🙏🏽💯
muchas gracias hermano, realmente no encontre ningun video en español o ingles sobre este intake y el tuyo me ha servido de mucho, recientemente adquiri el mio y con tu video me guiare mucho, gracias hermano buen video
Good install video!
I appreciate that
Very good video
I appreciate that a lot
Yes indeed bro in the building with big 👍👍👍👍
I appreciate that bro 🙏🏽
@@mattsauto6462 no problem 👍👍
I love K&N filters. Especially the oiled washable one. But they lied on this one. Thats not a cold air intake. The box doesn't look like it will seal to the hood and definitely has a big gap at the fender. Ergo , it's drawing less cold air than the stock set up and way more hot air from engine bay than stock . The goal is to NOT draw in any hot air from the engine bay. What do you all think the point of an intercooler is on a turbo ? The intercooler is just a radiator to cool the air coming in. Theres more to that but not here. Cold air is your friend , hot air is not ! You would do better to put the stock setup back on and switch to one of K&N's washable filters. They definitely flow more air than most paper filters. And they last. I put one on my 01 Expedition 15 years ago. Still on there. The filter it replaced was a basic paper filter that was clean. It got so much more air, the computer picked up a lean burn condition and triggered the check engine light. Reset it and it's been fine since. Somebody else mentioned the pipe steps down where it goes through the fender, there is a purpose for that. I haven't checked mine but I did run into that on my Expedition. Increased that tube and it did help throttle response right off the bottom but that was all. BTW, that little flap in the air horn that comes off the stock air cleaner. Is just there to pull warmed air across the exhaust manifold when the engine is cold. Suppose to help engine warm up. Never noticed it helping really so I pin mine so they stay open to fresh. They are know to go bad , get stuck sucking in super heated air of the exhaust. I pin mine to stay closed so fresh air only, and toss that little pipe thats hooked to it. And to all you guys running flipped lids on your air cleaners. It does not help ! You're getting nothing but hot air . Ever notice how your cars run better at cooler temps ? Us old guys (yes I'm an old mechanic) learned a long time ago, the hard way, flipped air cleaners and loud exhaust don't necessarily mean more power. They sound cooler so you push harder to hear the noise ! Getting better air flow is a great goal. But most likely your just getting better throttle response off the bottom. Maybe a tad in fuel milage. To get more power, ya gotta supply more fuel to go with that air. And not gonna happen with these old stock TBI's. Ever notice how the fuel from the injectors is spraying against the sides of the intake throats? That fuel is pooling up on the sides and dripping into the intake. Thats not efficient. The purpose of injection is proper/better atomization of the fuel than a carb can do. All the spacers everyone is using are not gonna solve that. Can you say "Holly Sniper" ? Not my bank account LOL. It's fun to tinker, been doing it a long time. But don't kid yourselves and don't waste your hard earned $$. Ok , rant over. Keep on tinkering fellas .
I like k n filters, don't like how the filter box isn't sealed off to the under hood hot air ... I've seen other aftermarket filter boxes that only get ambient air from the inner fender , that's probably the one to have, or just put a k n in the stock air box
Did you notice any difference compared to the stock? I put on a Airaid cold air intake and throttle body spacer on mine and it improved performance and mpg. I’m thinking of installing the tbi injector spacer next.
Make a video when you swap the carb please ! 🙏🏼
When will we get another tsx video? I want to see a reflash on that tsx. It will make a huge difference.
Working it next bro. I’m trying do It the right way this time.
You still have the oem intake?
Looks good, but performance wise you wasted your money the factory intake is already a cold air intake and can handle all the power your ever gonna make out of that 350tbi.
The factory is a cold air intake but it’s not allowing enough air flow to actually make the most power. You can check out a different vid on CZcams where they dyno tuned and it showed the difference it made, check it out. But The main difference I noticed so far is gas mileage I’m saving about a 2 gallon difference because I drive the same distance everyday at the same time with the truck and the fuel isn’t as low as it normally is around the 3 trip.
@mattsauto6462 I ran 450hp through the factory tbi air intake, you'll be fine bud😂. Your not gaining any power😂
Just let this man enjoy his mod. It's nit always about the most hp
Negligible difference in power, but throttle response is WAY better. Not to mention I noticed my gas mileage was a bit better afterwards. Plus, induction noise sounds great on these 350s when you have an intake
Ya the K&N is a waste of money im taking mine off after 16 years. Its kind of... not durable. The base gasket always fails cracks and leaks from the heat, The bolts and clamps loosen up. The whole system vibrates bad at wide open throttle. I modded the stock intake. Its going to get about the same gain as the KN opening it up and removing baffles.. No more stupid bracket to remove and extra nonsense to remove when I need to work on the engine with the K&N.. Not to mention the KN filters filter.. not too good. Not good for a truck often operated in dusty conditions like mine is
Would rather run a tube into the fender with the filter in the fender getting ACTUAL COLD AIR
That’s true, but that lil hole in the fender push air right into the filter.
@@mattsauto6462 a little bit of cold air mixing with a whole bunch of hot air? Idk man
@BuckeyeHitters it's something I've noticed. I liked my K&N when I put it on in late winter. Sounds good and better throttle response. However come Spring and the weather's warming up in CA, I noticed how much slower the truck is with the K&N. Switched back to the stock intake and it's actually FASTER, just a lot quieter. Either way, think I've learned my lesson with exposed-filter intakes. No go for me.
I can't even find this intake for my 95 TBI. where did you get it?
I got mines off of Amazon
I know I’m late but were did you buy the kit from because I have a 94 Chevy 4.3 v6 and I also want to do that to mine but I can’t seem to find the parts for it please help
same, I can't find it
I paused on the video. It's the intake or the 92-95 suburban 5.0-5.7L one. So that's why you can't find it for your 4.3
This is a cheyenne so that is a 350 I think not a 4.3 so we are effed haha
They don’t make it for the 4.3l only the v8s
Good video matt, We released a portable air pump. Are you interested in giving a review?
Yes would love to
@@mattsauto6462 Matt, I emailed you , still pending to be replied
Did the check engine light come on after install?
No check engine light and it runs great with it on
This k and n fit a 454 tbi engine?
Yes it fits all of the tbi from 88-94
I love it but I don't like how it looks I swear I wish I could keep it native but with mods at least
Yes I like the old school look more but at lease this way it save a lil gas